Tiskalnice za ohišja nakup rabljenega (8)

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, Gkedpfjxgvwpex Ab Tsf manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki - takoj na voljo -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, LAMELLA - CORPUS PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction Gedpfx Ajw Td A Isb Tjkf - Lamella pressing beam, TOP with 6 elements, lamella pressing beam, SIDE with 5 elements - Lamella pressing beams featuring the proven tolerance compensation system (Ganner System) for tightly compressed carcass joints - Counterpressure surfaces (side pressure wall, base) are 38 mm thick, laminated, continuous support plates - Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam - Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance carrier nuts with grease reservoir - Pressing is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressing beams is infinitely variable and electronically adjustable via 2 potentiometers and regulated by a frequency converter, making the pressing force control completely wear-free - Pressing force for the horizontal pressing beam: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg); Pressing force for the vertical pressing beam: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, LAMINATE – CABINET PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-free steel frame in welded and bolted design - Upper lamella pressing beam with 6 elements, lateral lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (System Ganner) for tightly compressed cabinet joints - Counter-pressure surfaces (side pressure plate, base) are 38 mm thick, coated, continuous support panels Gsdpfx Abjxvitio Tekf - Continuous pressing area with 95 mm height on the lower vertical pressing beam - Electromotor-driven adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and runout precision) and high-performance traversing nuts with grease reservoir - Pressing operation by electric motor, via 2 separate worm-gear motors (2 x 0.75 kW) - The pressing force of the beams is continuously electronically adjustable with 2 potentiometers and controlled via frequency inverters, making the press force regulation completely wear-free - Press force for horizontal pressing beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Press force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/sec - Very simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine no. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Thoroughly overhauled by Ganner, 6 months parts warranty Location: ex-stock 54634 Bitburg - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 941, delovna višina: 1.350 mm, delovna širina: 600 mm, delovna dolžina: 2.500 mm, TEHNIČNE PODROBNOSTI Gsdpfx Ajxnyg Rob Tekf Dolžina stiskanja: maks. 2.500 mm Višina stiskanja: maks. 1.350 mm Delovna globina: maks. 600 mm PODROBNOSTI O STROJU Električni podatki Nazivna napetost: 3/N/PE/400 V Nazivni tok: 11 A Nazivna moč: 4,7 kW Frekvenca: 50 Hz OPREMA Vertikalni in horizontalni pritiskalni nosilci z elektromehanskim pomikom Ustvarjanje pritiska prek frekvenčno vodenih zobniških motorjev Pritisk stiskanja vertikalno in horizontalno nastavljiv ločeno Čas stiskanja nastavljiv

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Godpfxsb Eln Ds Ab Tokf Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Gkjdjw Sgnkspfx Ab Tjf Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, LAMELLA/CASE CLAMP GANNOMAT "CONCEPT 70 ECO" complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates, 40 mm thick - Electromechanical adjustment of both pressing beams via precision trapezoidal-threaded spindles (with increased pitch and runout accuracy) and high-performance lead nuts with grease reservoirs - Pressing is performed electromechanically, by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force 2000 daN (kg) per pressing beam - The pressing force of the pressing beam is electronically controlled and adjustable via frequency converter, making torque transmission completely wear-free - Pressing and adjustment speed: 25 mm/sec - Extremely simple operation via 6 separate push buttons, 6 movement sequences selectable through the control unit - Freely adjustable pressing time pre-selection with automatic opening, 0-30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Gedpfjw Tdymsx Ab Tokf - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Used machine: Year of manufacture 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Gkjdpfx Aoiidm Nsb Tof Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -