Stroji za obdelavo lesa nakup rabljenega (234)

Stanje: dober (rabljeno), Leto izdelave: 1993, Nestro sistem za polnjenje 4 vreč z ventilatorjem Premer cevi: 250 mm Gsdpsxy Afyofx Ab Tekf Moč motorja: 4 kW Število vreč za ostružke: 4 Pretok zraka: 4840 m3/h Lokacija: na lokaciji pri stranki - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table Godpeff Efasfx Ab Tekf The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, ALTENDORF F 35 Typ 3 - 1000 formátová pila s předřezem 7,5 kW (10 HP), 3 otáčky, Motorické nastavení výšky a naklápění, Velký bezpečnostní kryt, Dvojitý pojízdný vozík 3 200 mm, Předřezová jednotka s LED osvětlením, CNC podélný doraz, šířka řezu 1 000 mm, Digitální úhlový/mitrový doraz (Digit-L), Prodloužení/rozšíření stolu, S osvědčeným povrchem CDF ----- Technické údaje ----- Rozsah naklápění: 0 - 46 °, Délka vozíku: 3 200 mm, Max. délka řezu: 3 100 mm, Gkodpfexyl Ecjx Ab Tjf Max. šířka řezu: 1 000 mm, Max. výška řezu: 154 mm, Max. průměr pilového kotouče: 450 mm, Výkon motoru: 7,5 kW, Velikost obrazovky: 15 palců, Výška pracovního stolu: 910 mm, Průměr odsávacího hrdla: 80 + 120 mm Vybavení: Altendorf F 35 Typ: III - 1000 7,5 kW (10 HP), 3 otáčky (M51064) Digitální úhlový/mitrový doraz Digit L - volitelně (M44154) Místo: skladem 54634 Bitburg - ihned k dispozici -

Stanje: novo, Leto izdelave: 2023, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether in your first own workshop, for daily use, industrial production, or as a powerful secondary machine, the F 25 is the space-saving all-rounder designed to boost your productivity. Materials such as wood-based panels, solid wood, wood-based materials, or extrusions can be processed with outstanding precision, exceptional handling, and superior cutting quality. The single-sided tilting saw unit also enables miter cuts. The smooth-running double roller carriage, following the Altendorf system, as well as the digital display for height and tilt adjustment, are standard features. A machine suitable for both beginners and professionals alike. Double roller carriage, 3,200 mm Tiltable, Manual height and tilt adjustment Rip fence with manual fine adjustment Angle mitre fence Large extraction hood, PSV Gksdpjqvn Ruofx Ab Tef ----- Technical Data ----- Swivel range: 0 – 46° Carriage length: 3,200 mm Rip fence: 1,000 mm with Digit X Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. saw blade projection: 104 mm Crosscut fence extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW, 7.5 HP Worktable height: 880 mm Type: F 25 Version 5 5.5 kW (7.5 HP), 2 speeds Rip fence Digit X, 1,000 mm Large PSV extraction hood Without scorer, prepared for retrofitting a scoring unit Special price ex-stock 54634 Bitburg - Immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1988, Table saw Ulmia Type 1710 S Serial No. 7270 Gkjdpfxor Elm Nj Ab Tof Year of manufacture: 1988 With sliding table With mortising table / device Tilting saw blade Table extension Maximum saw blade diameter: 250 mm Maximum cutting height: 75 mm at 90° Maximum cutting height: 52 mm at 45° Motor power: 2.2 kW Sliding table Sliding table travel: 750 mm Table height (to top edge): 850 mm Extraction connection diameter: 100 mm Weight: 203 kg Location: ex stock 54634 Bitburg - immediately available - Request more information

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, CASADEI F 25 LL FK - Spindle Moulder with Tilting Spindle and Table Extensions With Aigner integral fence and 3-roll power feeder - Machine in like-new condition - Spindle moulder with tilting spindle from -45° to +45° Solid steel and grey cast iron construction Dynamically balanced spindle assembly, anchored to the worktable Especially robust design Smooth operation due to precision assemblies and high dead weight Standard with reversible spindle rotation (right/left) and electronic lock when changing direction 5 speeds from 3000 - 10,000 rpm Speed can be changed easily and conveniently from the machine side Standard with MK 4 interchangeable spindle system Gkodpfx Aoxac Eyeb Tjf Large worktable made of cast iron for lasting precision Easy operation thanks to controls and speed display on the front of the machine Spindle fence with fine adjustment and aluminium fence cheeks as standard Powerful industrial motor Equipment details: Spindle fence Spindle fence with hand crank/handwheel adjustment from the front With digital display Interchangeable spindle MK 4 interchangeable spindle standard on all CASADEI F 23 and F 25 models Sliding table option Optional sliding table for small tenoning jobs and slotting operations Scope of delivery: Manually tilting spindle from +45° to -45° Speed display via LED on the front Aluminium fence cheeks Curved moulding guard Reversible spindle rotation MK 4 interchangeable spindle Spindle fence with hand crank/handwheel adjustment from the front with digital display Table extensions left and right (2500 mm length) Extending workpiece support (2500 mm length) Model CASADEI F 25 LL FK Article No. 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45° to -45° Usable spindle length at diameter 30-35 mm: 140 mm Usable spindle length at diameter 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter (profiling): 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. lowerable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter (fence): 1 x 120 mm Extraction port diameter (under table): 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 435.046, teža obdelovanca (maks.): 75 kg, višina obdelovanca (maks.): 60 mm, največja hitrost vrtenja: 20.000 obr/min, dolžina obdelovanca (maks.): 5.600 mm, delovna širina: 1.300 mm, DÉTAILS TECHNIQUES Gedjxnyn Iepfx Ab Tskf Largeur de travail : 1 300 mm Dimensions des pièces Largeur de la pièce (X) : 60 - 1 300 mm Épaisseur de la pièce (Z) : 6 - 60 mm Longueur de la pièce (Y) : 263 - 5 600 mm Poids de la pièce : max. 75 kg Broches de perçage : 13 verticales, 6 horizontales en Y, 2 horizontales en X Unité de rainurage : 1 en Y Puissance moteur de l’unité de fraisage : 5,5 kW (S1) Plage de vitesse : 1 000–20 000 tr/min Porte-outil : HSK63F Longueur maximale de la fraise : 130 mm DÉTAILS MACHINE Raccordement électrique : 400 V, 3 Ph, 50 Hz, 12 kVA, 17,5 A Alimentation en air comprimé : 7 bars ÉQUIPEMENT Dispositif de contre-pression pour largeur de travail 1 300 mm Table à rouleaux rabattable de 765 mm pour avant et arrière de la machine, largeur 500 mm Butée auxiliaire de 600 mm avec rouleaux intégrés pour tables à rouleaux Dispositif de sécurité supplémentaire avec rideau à lamelles Répartiteur d’aspiration : ∅ 160 mm / ∅ 80-80-80 mm, trame 196 mm Documentation

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Gjdpfx Ajxgvwpsb Tokf Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki - takoj na voljo -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Langzauner Edge Sanding Machine EK 3/4, Top Condition Accessories: several sanding belts included Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Powered feed Veneer sanding Round sanding support Oscillation Height adjustment: manual, table Sanding belt tiltable: Yes Conformity marking: CE mark Total connected load: 4.6 kW Gkjdpfxjvr Hw Io Ab Tjf Space requirements: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, MC Winkelaggregat HSK 63 F for inclined drilling at 7 degrees Excellent condition See photos Location: ex stock 54634 Bitburg - immediately available - Gsdowmr Uyjpfx Ab Tekf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, STRIEBIG III TRK pre-scoring unit (pre-scorer) In wooden crate Can be retrofitted to a Striebig Standard TRK Location: ex stock 54634 Bitburg Godpovluwvofx Ab Tekf - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, High-pressure fan, dust extraction fan, pressure fan, vacuum fan, high-pressure ventilator Gksdpfovlz Arox Ab Tof Model: VRU 15-100-30H2,8 Condition: Used Drive motor: 3.5 kW p1: 1.15 kg/m³ Speed: 2,880 rpm Airflow: 0.315 m³/s Pressure point: 62 mbar Inlet connection: Ø 100 mm Outlet connection: Ø 100 mm Dimensions: 1000 x 600 x 700 mm Weight: 180 kg Location: available ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Location: Available ex stock 54634 Bitburg Gkodpfx Aovk R Arjb Tof - Immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft HBS Precision Wood Bandsaws for the Professional Craftsman Top quality, workmanship, and value for money Particularly smooth and precise operation thanks to a torsion-resistant machine housing Large one-piece grey cast iron saw table with precisely ground and polished surface Quick-release saw blade tensioning via eccentric lever on the rear of the machine Supplied as standard with two speeds Precise 3-roller blade guides, standard top and bottom from HBS 351 and up Rapid cutting height adjustment via rotary knob and rack-and-pinion with millimeter scale Smooth-running aluminium parallel fence with eccentric quick-clamping and magnifying glass Standard mitre fence, adjustable ±60° to both sides Aluminium parallel fence with eccentric quick-clamping Technical data: Work table dimensions: 495 x 356 mm Cutting speed: 650 / 400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with fence: 321 mm Blade length: 2562 mm 3-roller precision guides: top/bottom Table tilt: -10°, +45° Motor output: 550 Watts / 230 Volts Weight: 80 kg Dimensions (mm): 610 x 445 x 1753 Extraction port diameter: 100 mm Gedpfxovk Sdke Ab Tjkf Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean-air extraction unit with H3 certification Suction inlet: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 1,140 m³/h Rated airflow: 814 m³/h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg Gkodpfx Ashkztwob Tsf - immediately available -

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Gkedpfxehkz E Te Ab Tef Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Enclosed and secure sawing area for increased safety thanks to a legally required saw blade guard Anti-rotation protection for the timber via stamped barbs in the rocking table Robust, torsion-resistant steel frame Transport device for easy mobility Impact, scratch, and weather resistant due to high-quality powder coating Gsdehkz Hiepfx Ab Tokf Phase inverter Dimensions and Weights Working height: 700 mm Rocking table support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Type: Electric motor with direct drive Electrical Data Rated power: 5 kW Supply voltage: 400 V Mains frequency: 50 Hz Saw Blade Diameter: 700 mm Cutting Capacity Round wood in rocking table: 250 mm Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of suction connection (inlet): 200 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Max. sound pressure level: 72 dB(A) Air Volume Nominal air flow: 2262 m³/h Dust tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirement Maximum performance in this class Very quiet All models equipped with collision protector Applications Designed for commercial use Suitable for all woodworking machines with corresponding suction connection diameters High-Quality, Thoughtful Construction -Robust and compact housing made of galvanized steel sheet -Suction connection can be easily converted from left to right for flexible use -Large access openings for maintenance -Large, mobile chip containers with clamping bracket and chip collection bag -Dust extractor comes fully assembled for immediate operation Gkjdpfohk Dfrox Ab Tsf -All models are mobile -RLA 210 model: Optimal chip distribution in the containers thanks to a large filter area Filter Description -Ultra-compact with maximum filter area -Filter material made of polyester fleece, aluminum-coated, washable and therefore highly durable -Filter standard antistatic, certified and approved according to category M-BIA -Filter resistance monitoring via differential pressure switch, adjustable with warning lamp on control panel -Fan mounted downstream of filter Equipment Details With innovative locking device for secure container positioning Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Gkodpfx Abshp Rc Io Tof Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), Electric heating rod Impact- and shock-resistant heating insert system with air-tight silicone-embedded heating conductors. No wear, no corrosion, safe operation even during continuous use and under impact or vibration. Temperature adjustment via integrated controller with insulated adjustment knob. Fixed industrial-grade power cable, no fragile plug connections. High-strength special aluminum profile for high load capacity and completely flat pressing surfaces. Standard version gold-anodized, scratch and abrasion resistant, easy to maintain. Size/Type: EST 21 Length: 2100 mm Godpolcd Szsfx Ab Tjkf Power rating: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200°C Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Gsdpolht Hwefx Ab Tekf Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Leto izdelave: 2022, Stanje: novo, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, tiltable, Extension table, Mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Tilting range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Maximum cutting height: 87 mm, Maximum saw blade diameter: 315 mm, Mitre fence tilting range: up to 49°, Gksdpfx Aeihahmeb Tsf Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction port diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Location: Available from stock 54634 Bitburg - immediately available - Location: Available from stock 54634 Bitburg - free loaded - - immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Gedpjih Dxdofx Ab Tjkf Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Robust cast steel/grey cast iron construction Large-dimension milling unit made of grey cast iron, tiltable up to -45° to the rear Milling speeds displayed via LEDs Fast, effortless speed change via eccentric clamping Forward and reverse rotation Height and tilt display accurate to 1/10 mm Professional-grade heavy-duty fence: with fine adjustment via rack and pinion, numerical display, aluminum fence jaws, 3-way positioning for quick repeat settings TECHNICAL DATA Dust extraction connection Extraction port diameter: 2 x 120mm Work table Table length: 2500mm Table width: 655mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Motor power: 5.0kW Spindle Gksdpfoiidnfex Ab Tof Spindle tilting: 0 – -45° Usable spindle length: 125mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle shaft diameter: 30mm Maximum cutter diameter Max. tool diameter: 240mm Max. retractable tool diameter: 230mm Max. profile milling tool diameter: 210 – 240mm Max. tenoning cutter diameter: 320mm SCOPE OF DELIVERY Aluminum milling fence jaws Curved workpiece safety guard Motorized height-adjustable and tilting spindle Digital display of set values Speed display at the front of the machine via LED Extension table left and right Location: In stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold anodized platens Touch display control - Electric heating platens: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm - Opening height: 350 mm - Loading possible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW - Electric heating platens made of solid hard aluminum with integrated heating wires - Heating capacity: 22 kW - High-pressure insulating panels - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz Gkjdpodx R Tfofx Ab Tof - Meets CE safety regulations Standard features: - Movement of the press table via rack-and-pinion and parallel guides on 2 corners of the press table made of self-lubricating material - Electronic control unit with touchscreen for machine control and monitoring - Digital timer for pressing time setting and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for pressing time selection - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety support for lower press table Integrated accessories: - Touch Screen TS/400 - EFC Electronic flatness control - Gold anodized heating platens (Busse) Location: Ex stock 54634 Bitburg - Immediately available -