Stroji za obdelavo lesa nakup rabljenega (234)

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Gkjdpfslht Hwsx Ab Tsf Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Technical data: Gjdpfx Abed R Ev De Tekf • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Location: In stock at 54634 Bitburg - free loading - Can be shipped for a fee

Stanje: novo, Leto izdelave: 2025, Rehnen Shelf Trolley Varioflex Flexible Paint Drying Trolley Sturdy tubular frame construction 17 shelves Extendable and lockable from 200 to 2000 mm 4 polyamide swivel casters Load capacity: 400 kg Support tubes galvanized Optional: Additional rack Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1980 mm Support tube length: 650 mm Extended up to: 1150 mm Clear distance between tubes: 60 mm Load capacity: 400 kg Available immediately Gjdpfx Abobumtie Tokf Trolley can also be shipped within Germany for €75 net

Stanje: novo, Leto izdelave: 2025, AL-KO Clean Air Dust Extractor Demonstration unit (no operating hours - as new) Gsdpfsbuvbrex Ab Tjkf Technical Data Power Unit 250 P: Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa cutterhead Knife changes in seconds When the machine starts, centrifugal force automatically tensions the knives—self-locking The knife projection is automatically set without using jigs Work table The work table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all working conditions Gsded Hx E Iepfx Ab Tekf Standard with electric table adjustment Thanks to the special lifting system, the table position is reliably maintained even without locking Helically toothed steel feed rollers for constant and even wood feed Second, rubberized feed roller at outfeed Heavy-duty anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions & weights Length: approx. 1170 mm Width/depth: approx. 1003 mm Weight: approx. 660 kg Dust extraction connection Extraction port diameter (thickness): 150 mm Drive power Main motor: 7.5 kW Installation information Required length: 1170 mm Required width/depth: 1003 mm Required height: 1197 mm Note on required space: Dimensions account for maximum travel or working lengths. Machine body length: 1170 mm Machine body width/depth: 705 mm Length: 1000 mm Width: 2000 mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 250 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connection voltage: 400 V Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Ex-display unit – available at a special price Available at a special price Technical Data 300-P Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 6,000 m³/h Nominal air flow rate: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Gksdpjcdy I Tjfx Ab Tsf Weight: 880 kg Special feature: Unit is equipped with a silencer – therefore extremely quiet – can be sold with or without the silencer Location: Available ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, for processing smaller parts, primarily solid wood Simple and safe operation Combination sanding unit with sanding shoe for calibrating solid wood Gkjdpfx Ascnw U Rob Tsf Control panel located at the front Standard with ribbed steel roller, Ø 120 mm, and hard sanding shoe with graphite layer on replaceable insert Motorized height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor start Mechanical display of table position Ammeter for displaying current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding tasks on solid wood Model BBS 630 C Item No. 5343065 Technical Data Working width: 630 mm Working roller diameter: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed drive motor: 0.43 kW Table height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Belt blower operating pressure: 8 bar Extraction connection diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (L x W x H): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving at warehouse 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear Gkedjcnxayjpfx Ab Tjf High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: novo, Leto izdelave: 2025, Maximum specification for professional users. Multi-function combination machine with TERSA cutterblock, mitre cutting unit, and tilting spindle moulder. Ø 350 mm main saw blade with 118 mm maximum cutting height, even with scoring blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside. High-precision sliding table made of anodised aluminium on hardened and polished steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to 3300 mm. Saw aggregate tilts from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the fence. Four spindle speeds. Spindle moulder with reversible rotation direction. Quick conversion to thicknesser thanks to parallely opening surface tables. 2-speed feed on thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Includes separate rip fence and separate jointer fence. Equipped with lockable main switch. Equipment details: Crosscut fence Immediate control Outrigger table Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium Guides made of hardened and ground F550S steel, 15% harder than conventional steel Guides are riveted, not glued Smooth-running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guideways Cast iron dual trunnion saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to saw blade, supported on both sides Height and tilt adjustable up to 45° Scoring unit with separate 0.55 kW scoring motor as standard Dual trunnion spindle moulder unit Large dimensioned, tilting cast iron dual trunnion spindle moulder unit Spindle fence Heavy-duty professional version The high-quality spindle fence made of cast iron is supplied with fine adjustment as standard 3-position for quick recall of settings Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Planer section Helical-toothed steel infeed rollers ensure consistent wood feed Massive anti-kickback devices prevent workpiece kickback 4-knife Tersa cutterblock for optimal planing results Table lips ensure quieter operation Tersa planer cutterblock No more setting or screwing Knife change in seconds Self-locking Extremely quiet operation Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, guaranteeing maximum stability under all working conditions Special lifting device ensures table position is maintained precisely, even without locking Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Reversible aluminium fence ruler No gap in measurement, guide bars are overlapping Separate surface fence Large professional design (1800 x 150 mm) Tiltable 0-45° With quick adjustment Stable round bar guide made of ground steel Gkedpfjcnxa Sex Ab Tjf Simultaneous opening Art. no.: 5500557

Stanje: novo, Leto izdelave: 2024, Axle 920 mm X-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min A-axis 360 degrees Minimum workpiece dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters possible for drilling: 3 - 35 mm The saw blade operates in the X-direction Maximum depth with saw blade: 10 mm Gkjdpfxscnz H Ho Ab Tof Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2023, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether in your first own workshop, for daily use, industrial production, or as a powerful secondary machine, the F 25 is the space-saving all-rounder designed to boost your productivity. Materials such as wood-based panels, solid wood, wood-based materials, or extrusions can be processed with outstanding precision, exceptional handling, and superior cutting quality. The single-sided tilting saw unit also enables miter cuts. The smooth-running double roller carriage, following the Altendorf system, as well as the digital display for height and tilt adjustment, are standard features. A machine suitable for both beginners and professionals alike. Double roller carriage, 3,200 mm Tiltable, Manual height and tilt adjustment Rip fence with manual fine adjustment Angle mitre fence Large extraction hood, PSV ----- Technical Data ----- Swivel range: 0 – 46° Carriage length: 3,200 mm Rip fence: 1,000 mm with Digit X Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. saw blade projection: 104 mm Crosscut fence extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW, 7.5 HP Worktable height: 880 mm Type: F 25 Version 5 5.5 kW (7.5 HP), 2 speeds Rip fence Digit X, 1,000 mm Gkodpfx Absqvn Rue Tsf Large PSV extraction hood Without scorer, prepared for retrofitting a scoring unit Special price ex-stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Gjdpfsqlck Nox Ab Tjkf Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1988, Table saw Ulmia Type 1710 S Serial No. 7270 Year of manufacture: 1988 With sliding table With mortising table / device Tilting saw blade Table extension Maximum saw blade diameter: 250 mm Maximum cutting height: 75 mm at 90° Maximum cutting height: 52 mm at 45° Motor power: 2.2 kW Sliding table Sliding table travel: 750 mm Table height (to top edge): 850 mm Gedpfer Elm Njx Ab Tjkf Extraction connection diameter: 100 mm Weight: 203 kg Location: ex stock 54634 Bitburg - immediately available - Request more information

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 435.046, teža obdelovanca (maks.): 75 kg, višina obdelovanca (maks.): 60 mm, največja hitrost vrtenja: 20.000 obr/min, dolžina obdelovanca (maks.): 5.600 mm, delovna širina: 1.300 mm, DÉTAILS TECHNIQUES Largeur de travail : 1 300 mm Dimensions des pièces Largeur de la pièce (X) : 60 - 1 300 mm Épaisseur de la pièce (Z) : 6 - 60 mm Longueur de la pièce (Y) : 263 - 5 600 mm Poids de la pièce : max. 75 kg Broches de perçage : 13 verticales, 6 horizontales en Y, 2 horizontales en X Unité de rainurage : 1 en Y Puissance moteur de l’unité de fraisage : 5,5 kW (S1) Plage de vitesse : 1 000–20 000 tr/min Porte-outil : HSK63F Longueur maximale de la fraise : 130 mm DÉTAILS MACHINE Raccordement électrique : 400 V, 3 Ph, 50 Hz, 12 kVA, 17,5 A Alimentation en air comprimé : 7 bars ÉQUIPEMENT Dispositif de contre-pression pour largeur de travail 1 300 mm Table à rouleaux rabattable de 765 mm pour avant et arrière de la machine, largeur 500 mm Gkodpfx Asxnyn Ijb Tsf Butée auxiliaire de 600 mm avec rouleaux intégrés pour tables à rouleaux Dispositif de sécurité supplémentaire avec rideau à lamelles Répartiteur d’aspiration : ∅ 160 mm / ∅ 80-80-80 mm, trame 196 mm Documentation

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Godoxgvwpjpfx Ab Tjkf Lokacija: pri stranki - takoj na voljo -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Compact wide belt sander with combination sanding unit With special features package – Top condition – Special features package: - On/off switching of the sanding shoe from the control panel - On/off switching of the drum from the control panel - Electronic control Fox 500 KTR - Table extension with two rollers for infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard-equipped with diagonally grooved steel drum Ø 120 mm for calibration Fine adjustment of working height Clear, user-friendly control panel at the front Robust tube-reinforced monoblock steel machine body, robot-welded, with working units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment option for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel drum Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding of solid wood, particle boards, and veneer Technical data Length (product) approx. 1388mm, height (product) approx. 1668mm Width/depth (product) approx. 1545mm Dust extraction connection Gkodpjxac E Hsfx Ab Tjf Suction nozzle diameter 140mm Electrical data Supply voltage 400V, current type AC Phase(s) 3Ph, mains frequency 50Hz Feed motor power 0.33 / 0.55kW Table height adjustment motor power 0.25kW Drive motor power 7.5kW Sanding unit Sanding belt length 1525mm, max. sanding width 950mm Sanding belt width 970mm Feed unit Feed speed 4.5 / 9m/min Workpiece Min. workpiece height 4mm, max. workpiece height 170mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, LAMELLA - CORPUS PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lamella pressing beam, TOP with 6 elements, lamella pressing beam, SIDE with 5 elements - Lamella pressing beams featuring the proven tolerance compensation system (Ganner System) for tightly compressed carcass joints - Counterpressure surfaces (side pressure wall, base) are 38 mm thick, laminated, continuous support plates - Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam - Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance carrier nuts with grease reservoir - Pressing is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressing beams is infinitely variable and electronically adjustable via 2 potentiometers and regulated by a frequency converter, making the pressing force control completely wear-free - Pressing force for the horizontal pressing beam: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg); Pressing force for the vertical pressing beam: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, 6-month parts warranty Gkjdpjw Td A Iefx Ab Tsf Location: ex stock 54634 Bitburg - Immediately available -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, LAMINATE – CABINET PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-free steel frame in welded and bolted design - Upper lamella pressing beam with 6 elements, lateral lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (System Ganner) for tightly compressed cabinet joints - Counter-pressure surfaces (side pressure plate, base) are 38 mm thick, coated, continuous support panels - Continuous pressing area with 95 mm height on the lower vertical pressing beam - Electromotor-driven adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and runout precision) and high-performance traversing nuts with grease reservoir - Pressing operation by electric motor, via 2 separate worm-gear motors (2 x 0.75 kW) - The pressing force of the beams is continuously electronically adjustable with 2 potentiometers and controlled via frequency inverters, making the press force regulation completely wear-free - Press force for horizontal pressing beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Press force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/sec - Very simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine no. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Gjdsxvitiopfx Ab Tokf Thoroughly overhauled by Ganner, 6 months parts warranty Location: ex-stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Bäuerle debelinski skobeljni stroj DM 630 s podaljškom mizne površine Širina skobljanja: 630 mm Višina skobljanja: 260 mm Nožna gred Centrofix Z = 3 Gumirani dovodni in odvodni valji Električna nastavitev mize z digitalnim prikazom Pogonski motor: 7,5 kW Podajanje: 7 + 14 m/min Sesalni nastavek: 160 mm Dimenzije: 1150 x 1120 x 1060 mm + podaljšek mize Teža: pribl. 1260 kg Lokacija: iz zaloge 54634 Bitburg - takoj na voljo - Gjdpfx Abjxgbwuo Tekf

Stanje: novo, Leto izdelave: 2025, Vertical design for splitting short and meter-length wood Low ground plate for easy, fatigue-free loading of large logs Mechanical log lifting device positions heavy logs ergonomically Equipped with log holding bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter included on all 400 V models Two-hand safety operation Convenient transport using hand tow bar with standard undercarriage, solid rubber wheels, and additional support wheel Shock and scratch resistant thanks to high-quality powder coating Space-saving storage thanks to easily lowerable cylinder Dimensions and Weights: Length approx.: 1440 mm Width/Depth approx.: 1350 mm Height approx.: 2280 mm Weight approx.: 185 kg Drive: Type: Electric motor Gkjdohkz Hmspfx Ab Tef Rated power: 3.5 kW Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Machine Data: Max. splitting force: 14 t Min. splitting length: 560 mm Max. splitting length: 1040 mm Min. log diameter: 100 mm Max. log diameter: 300 mm Hydraulic System: Hydraulic oil tank capacity: 7.5 l Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Gsdpfxohk S Sdo Ab Tjkf Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing and saw chips (not suitable for dust) 180° rotatable extraction unit allows for suction from below or above Robust fan impeller made of metal Supplied with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 110 l Outer diameter extraction nozzle inlet: 203 mm Outer diameter extraction nozzle outlet: 1 x 100, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min¯¹ Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Airflow Nominal airflow: 1900 m³/h Max. negative pressure: 1700 Pa Gkodpohk S Shefx Ab Tjf Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Gksdpfxohk S Sls Ab Tof Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2022, Drilling depth: 170 mm Drilling width: 250 mm Speed: 2800 rpm HOLZKRAFT Mortising Machine LLB 30 Entry-level mortising machine with single-hand lever, eccentric clamp, dowel drilling device, and drill head height adjustment with handwheel and digital display for fast and precise operation. Worktable (LxW): 580 x 300 mm Drilling width: 250 mm Drilling depth (at 90°): 170 mm Drill head height adjustment: 200 mm Worktable swivel range: not swiveling Tool holder: WESCOTT chuck Clamping range: Ø 0 - 20 mm Spindle speed: 2,800 min-1 Motor power: 2.2 kW | 400 V - 50 Hz Extraction port: Ø 70 mm Dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Includes dowel drilling device, eccentric clamp, digital height adjustment display, Wescott chuck 0-20 mm HOLZKRAFT LLB 30 Mortising Machine – Entry-level machine for professional mortising – Made in EU Easy operation with single-hand lever for fast and precise results Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with handwheel and digital readout Manual eccentric clamp Sturdy steel and cast iron construction Powerful three-phase motor Dowel device with notching positions: 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick setting of the drill head travel Scope of delivery: HOLZKRAFT LLB 30 Mortising Machine Drill head height adjustment with handwheel and digital display Gksdpoih H A Refx Ab Tof Dowel drilling device with indexing Eccentric clamp Wescott chuck 0 – 20 mm Operating manual with exploded diagrams, spare parts list, and EC Declaration of Conformity Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 2014, Stanje: zelo dobro (rabljeno), Axis 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed rate 20 m/min A-axis 360 degrees Minimum Dimensions: Sheet: x = 300 mm y = 120 mm z = 12 mm Gsdpfx Asfmdcqob Tekf The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X direction Max. depth with saw blade: 10 mm Motor 0.75 HP, 400 Volt Required extraction capacity: 2300 m3/h Location: arriving at warehouse 54634 Bitburg - immediately available -