Stroji za obdelavo lesa nakup rabljenega (234)

Stanje: novo, Leto izdelave: 2025, Glue application machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Max. clearance height: 100 mm Speed: 18 m/min Working height: 900 mm Application roller diameter: 185 mm Connected load: 0.5 Hp, 0.37 kW Operator side: right Gedpfod Iz Dfsx Ab Teca Electrics: 400 V / 50 Hz / 3 phase Technical features: - Frame of the glue application machine made from welded steel plate. - 1 motor for driving the two rollers - Glue application rollers covered with special acid-resistant rubber, precision-ground and grooved, abrasion-resistant. - The thick rubber layer can be re-ground several times. - Special dampers on the roller supports allow for automatic opening of the rollers to compensate for workpiece irregularities up to max. 5 mm. - Glue dosing via zinc-coated distribution tray, easily removable for cleaning. - 1 handwheel for adjusting roller opening - Roller safety guard for operator protection - Electrical components meet the highest quality standards - CE conformity

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Panhans Band Saw BSB 500 Upper and lower APA II blade guides Tilting table plate up to 45° Door safety with limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 HP Motor 400 Volt with motor brake Blade speed 1,290 m/min Max. cutting height 320 mm Max. cutting width 485 mm Blade length max. 4,145 mm Table dimensions 500x680 mm Table height 890 mm Extraction ports 2x100 mm Required space: 900x525x1925 mm Weight 220 kg CE-compliant, GS-tested Available from stock in 54634 Bitburg Gsdpfxedq D I Hs Ab Toca

Leto izdelave: 2025, Stanje: novo, Vacuum Lifter BARBARIC, Swivelling, incl. Column Slewing Crane Equipment package consisting of: - Vacuum lifter uniWood B3-90 Degree - 250 Comfort version with integrated chain hoist, reinforced, load capacity: 250 kg Suitable for the vertical and horizontal transport of flat, standard commercial panels. Vacuum generation is achieved pneumatically via ejector. A reinforced vacuum pump is installed for lifting permeable materials (MDF over 8 mm thick). -- Technical Data -- Lifting speed chain hoist: 0–10 m/min infinitely variable via frequency converter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Dead weight: approx. 85 kg Gcjdpfx Aec Umfteb Tea -- Safety system -- The lifter is equipped with a vacuum gauge. Load release via 2-button operation - BARBARIC Column Slewing Crane Load capacity 250 kg at the hoist Consisting of: column, bracket, and low-friction jib. Supplied with trolley and energy supply system. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Jib outreach: 5 m Slewing range: approx. 250° Manual slewing and trolley travel Base plate 700 x 700 mm with mounting materials. Supplied with chemical anchors for concrete floor. A prerequisite for this mounting is a suitably reinforced concrete floor. The static inspection of the floor is to be carried out and documented by the customer. Other versions and lengths available on request.

Leto izdelave: 1988, Stanje: rabljeno, številka stroja/vozila: 01910/88, Eugen Laegler Floor Sanding Machine Gcedpfxjcb Au Se Ab Tsa Model: Vibrafor Motor Power: 1.1 kW Voltage: 220 V Vibrating sanding surface Dust bag included Location: 54634 Bitburg – inspection possible

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Ex-demonstration unit – as new Available at a special price Technical data 300-P: Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. air flow rate: 6,000 m³/h Rated air flow rate: 5,089 m³/h Vacuum: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Gjdpfx Ascdrzdeb Tjca Location: Ex-stock Bitburg Subject to prior sale.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Gjdpfx Aecnwydob Tsca Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Gsdpfjcnxa Nex Ab Toca Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish

Stanje: novo, Leto izdelave: 2025, Mitre and crosscut circular saw with a maximum cutting height of 170 mm robust cast iron construction Gcjdpocnz N Hefx Ab Tja precise linear ball bearing guide for the tool carriage on hardened and ground steel shafts manual feed rapid mitre adjustment up to 65° horizontal adjustable limit stops lower blade guard can be connected to an extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Mitre range horizontal ZS 170 -----170 mm-----45 degrees - 90 degrees Model----- Saw blade-----Extraction port-----Weight ZS 170 -----420 mm-----100 mm -----120 kg Accessories on request: Roller conveyor / length stop types RO, RL, RLK, RLH and RLHK for processing aluminium and PVC profiles as well as wood profile boards. The modular roller conveyor system can be supplied as follows: 3 m Type RO: infeed roller conveyor with at least 2 support legs 3 m Type RLK: roller conveyor with length stop with rear-folding adjustable stop carriage - Machine stand - Main switch lockable - Infeed roller conveyor Ro-St60, 3 meters, right side - Roller conveyor RLK-ST60 L, 3.0 meters measuring length Heavy-duty length stop/roller conveyor version mm scale on rear rail, measuring caliper with magnifier and stop flap - Saw blade 420 x 3.5 x 40, 84 teeth, negative rake Location: Ex stock 54634 Bitburg - loaded free of charge - - immediately available -

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Gsdpfscqvhwox Ab Tsca Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design incorporates numerous technical innovations that enhance the functionality and usability of this panel saw. Its high-quality workmanship places it among the best in its class. The machine comes standard with an aluminum sliding table CV 360T, featuring a highly precise and securely mounted guide on hardened rails. Optional equipment includes the robust multi-chamber aluminum sliding table CV 400T, offering a very rigid construction and precision assembly with steel bar mounting. Sliding table size: 400 x 3200 mm. Precision and reliability are assured by the heavy-duty swivel segment guidance of the sawing mechanism within the rugged cast iron body, as well as a separate scoring unit with its own motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40%: 7.5 kW/3×400 V Motor speed: 2,870 rpm Max. saw blade diameter with scorer: Ø 350 mm Spindle diameter: 30 mm (1″) Saw blade spindle speed: 4,450 rpm Max. cutting height: 120 mm (83 mm at 45°) Saw blade tilt: 0° to 45° Max. cutting width: 1,300 mm Scoring unit Motor power: 0.75 kW (1 kW) Blade diameter: Ø 120 mm (100 mm) Spindle diameter: Ø 20 mm Speed: 8,530 rpm Machine dimensions Length: 3,355 mm Width: 3,450 mm Table height: 892 mm Max. machine height: 1,460 mm Table size: 1,185 x 500 mm Extraction port diameter: 100 + 100 mm Gcsdpfx Aen D Arhjb Tea Gross weight: 680 kg Net weight: 675 kg Aluminum Sliding Table CV360T Table size: 3,200 x 360 mm Support frame size: 1,240 x 650 mm Cutting length: 3,200 mm Power supply protection: 16 A (25 A) Noise level (without technology): 81.8 dB(A) Noise level (with technology): 85.3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Vertical design for splitting short and meter-length wood Low ground plate for easy, fatigue-free loading of large logs Mechanical log lifting device positions heavy logs ergonomically Equipped with log holding bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter included on all 400 V models Two-hand safety operation Convenient transport using hand tow bar with standard undercarriage, solid rubber wheels, and additional support wheel Shock and scratch resistant thanks to high-quality powder coating Space-saving storage thanks to easily lowerable cylinder Dimensions and Weights: Length approx.: 1440 mm Width/Depth approx.: 1350 mm Height approx.: 2280 mm Weight approx.: 185 kg Drive: Type: Electric motor Rated power: 3.5 kW Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Machine Data: Max. splitting force: 14 t Min. splitting length: 560 mm Max. splitting length: 1040 mm Min. log diameter: 100 mm Max. log diameter: 300 mm Hydraulic System: Hydraulic oil tank capacity: 7.5 l Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale Gcjdpfx Ajhkz Hmsb Toa

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Gcjdpfehk S Sdsx Ab Toa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing and saw chips (not suitable for dust) 180° rotatable extraction unit allows for suction from below or above Robust fan impeller made of metal Supplied with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 110 l Outer diameter extraction nozzle inlet: 203 mm Outer diameter extraction nozzle outlet: 1 x 100, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min¯¹ Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Gsdpfxohk S Shs Ab Toca Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Airflow Nominal airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Gcedehk S Slopfx Ab Tja Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Josting paketni furnir - rezalni stroj Tip: EFS 2300 L - l. 1994 Dolžina reza: 2.300 mm Največja vstavitvena višina: 80 mm Varnostna svetlobna zapora FIESSLER Vodilo za prikaz položaja reza Paralelni naslon z motornim pomikom, fina nastavitev z ročnim kolesom Priključna moč: 7,7 kW Teža: 2.700 kg Mere: 3610 x 1700 x 1680 mm Godpfxsxgbwze Ab Tjca Na lokaciji: takoj na voljo

Stanje: dober (rabljeno), Leto izdelave: 2009, Manufacturer: BIESSE Model: UNICLAMP Machine Type: Mechanical Clamping System Year of Manufacture: 2009 Item Number: 7350171 Gcodowmr Tvspfx Ab Tja Technical Data: Quantity: 5 Clamping Height: 15–55 mm Height: 48 mm, with quick coupling Suitable for: Biesse Additional Information: * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements suitable for securing strips on Biesse console tables with ATS Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 90 t, premer cilindra: 85 mm, hod: 350 mm, število valjev: 6, TECHNICKÉ PODROBNOSTI Elektrické topné desky: 3 000 x 1 300 mm Počet topných desek: 2 ks Celkový tlak: 90 t Zdvih válce: 350 mm Počet pater: 1 ks Otevření patra: 350 mm Tlakové válce: 6 ks Průměr tlakových válců: 85 mm PODROBNOSTI O STROJI Pracovní teplota: 90 °C Max. teplota: 120 °C Elektrické údaje Gjdpfx Aboxnyqps Tjca Provozní napětí: 400 V/50 Hz Příkon: 22 kW Topný výkon: 22 kW Příkon hydraulické jednotky: 3 kW VYBAVENÍ Pohyb lisovacího stolu pomocí hřebene a paralelního vedení Elektronická řídicí jednotka s dotykovým displejem Digitální časový spínač pro nastavení doby lisování Digitální zadávání a sledování lisovacího tlaku Digitální diagnostika a zobrazení chybových hlášení Bezpečnostní obvod s obsluhou oběma rukama Bezpečnostní nouzové táhlo Bezpečnostní držák spodního lisovacího stolu EFC Elektronická kontrola rovinnosti Topné desky opatřeny zlatým eloxováním (Busse) Poznámka: Demontáž a nakládka může být nabízena za cca 1 200 € bez DPH.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The outstanding advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large collection window with air guide plates – suitable for larger workpieces as well. Paint mist separation efficiency up to 99%, pre-filter holding capacity up to 18 kg/m² – resulting in long filter service life! Simple and fast filter change at the front side. Cost-effective replacement filters. Low acquisition costs and extremely low energy consumption. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as secondary filter unit. Ex-ventilator incl. throttle valve mounted on the left. Don’t compromise on surface quality. Easy Paint extraction walls are the ideal, economical solution for effective capture and filtration of paint mist as well as extraction of solvent vapors. Robust and powerful yet economical in operation. The IPE double filtration system ensures two-stage filtration for a maximum separation rate of up to 99%. The cardboard labyrinth filter, with its folded filter pockets, initially captures significantly more overspray (up to 18 kg/m² of filter area) than conventional filter mats. The downstream glass fiber secondary filter only retains the finest remaining particles. Gsdpfx Abecnz Iqj Teca As a guideline for the cardboard labyrinth filter, depending on the paint used, a service life of approx. 150 to 200 painting hours can be expected. The glass fiber filter only needs to be replaced after approx. 900 to 1200 painting hours, i.e. only at every 5th or 6th cardboard filter change. Easy Paint is additionally equipped with a lower intake opening, enabling quick and safe extraction of solvent vapors at floor level or from floor pits. This additional downward-facing intake can connect the Easy Paint unit to a floor pit or sump for subfloor extraction. The front-loading filter cassette also makes filter changes simple here. Standard extraction capacity Easy Paint 3500 Item no. 600025 Air volume (standard delivery)* 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Drive power motor 400V/50Hz 1.1 kW ex Connection stub extraction pipe D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with collection window 855 Weight in kg 145 Location: Ex stock Bitburg Ex-display machine at special price

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s Gcsdjqlckpspfx Ab Tsa • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 2007, Al-Ko clean air dust extractor, used Inlet nozzle: 160 mm Rated motor output: 2.2 kW / 3-phase Gjdpjw Aptlefx Ab Tjca Voltage: 400 V / 50 Hz Nominal air flow rate: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 liters Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Weight: 288 kg Location: ex-stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Sprossen punch 12 mm used, in top condition Make: Schleicher Sprossen blade 12 mm Support table on the right with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Gedpfx Absw Hlzto Tsca Weight approx. 65 kg Storage location: 54634 Bitburg, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.300 mm, največja širina rezanja: 4.250 mm, model krmilnika: Power Control CADmatic 4.0, Set de machine à scier Holzma pour le découpage des panneaux et système de magasinage Bargstedt! Holzma HPP 380/43/43/R DÉTAILS TECHNIQUES Longueur de coupe : 4 300 mm Largeur de coupe : 4 250 mm Saillie de la lame de scie : 95 mm Moteur principal de scie : 18 kW Moteur de la lame inciseur : 2,2 kW Tension d'alimentation : 400 V (+10%/-5%) / 50 Hz DÉTAILS DE LA MACHINE Commande : Power Control CADmatic 4.0 avec écran plat de 17 pouces Tension d'alimentation : 400 V (+10%/-5%) / 50 Hz Puissance totale requise : 29 kW ÉQUIPEMENTS Programme de rainurage Programme de découpe/relâchement de tension Étiquetage / programme d'étiquettes / imprimante d'étiquettes PICA 108 Interface de données pour systèmes de magasinage Logiciel d’optimisation de découpe Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 DÉTAILS TECHNIQUES Gcjdpfx Asxpu Rgsb Tea Longueur du chariot mobile : 13,45 m Portée : env. 12,5 m Hauteur max. du dessus de pile dans le magasin : 1 700 mm Taille max. de la pièce : 4 200 x 2 070 mm ÉQUIPEMENTS Entraînement rotatif 1 poste de chargement et 1 poste de déchargement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 1.300 mm, premer žaginega lista: 500 mm, Oprema: dozator, TEHNIČNI PODATKI Dolžina dvojnega vozička: 3.000 mm Širina reza: 1.300 mm Pogonska moč: 5,5 kW Premer žaginega lista: 500 mm Gcsdpfxexnx Hcj Ab Tea Podaljšek mize: 840 mm OPREMA Enota za vretenje s 2 osmi Kotno-nagibno vodilo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 941, delovna višina: 1.350 mm, delovna širina: 600 mm, delovna dolžina: 2.500 mm, TEHNIČNE PODROBNOSTI Dolžina stiskanja: maks. 2.500 mm Višina stiskanja: maks. 1.350 mm Delovna globina: maks. 600 mm Gcodpfxsxnyg Rj Ab Tsa PODROBNOSTI O STROJU Električni podatki Nazivna napetost: 3/N/PE/400 V Nazivni tok: 11 A Nazivna moč: 4,7 kW Frekvenca: 50 Hz OPREMA Vertikalni in horizontalni pritiskalni nosilci z elektromehanskim pomikom Ustvarjanje pritiska prek frekvenčno vodenih zobniških motorjev Pritisk stiskanja vertikalno in horizontalno nastavljiv ločeno Čas stiskanja nastavljiv

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Godpfx Abju I R Uts Tsca Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -