Stroji za lepljenje robnih trakov nakup rabljenega (8)

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Gjdpfx Abslht Hws Tskf Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Gkjdpfji Am U Dex Ab Tof Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Gedpfslht Hzex Ab Tokf Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Gjdpfx Abshqadcj Tokf Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, E450PM – AVTOMATSKI ROBNI LEPILNI STROJ V000047 LME450PM-5 z enoto za rezkanje spojev Stroj v vrhunskem stanju NAPETOST 400/50/3 KRMILJENJE S 7'' ZASLONOM NA DOTIK ZAMENLJIVA LEPILNA ENOTA VR – MULTIFUNKCIJSKA ČELILNA ENOTA Orodje za ravno/zaobljeno čeljenje KOMPLET ORODIJ R=2 mm SKOBELNA REZILO ZA POVRŠINO ENOTA ZA LOČILNO SREDSTVO LED NOTRANJA OSVETLITEV DOKUMENTACIJA V NEMŠČINI INFRARDEČA SVETILKA za ogrevanje plošč SKOBELNA ENOTA Lokacija: iz zaloge 54634 Bitburg Gkodpfx Ajxac Hwsb Tef - na voljo takoj -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Brand KDF110 Optimat Ambition – only 1,150 operating hours Make: Brandt Model: KDF 110 Year of manufacture: 2012 Serial No.: 0-261-20-6960 Control: Easy Control 10+ non-contact distance control, feed-regulated with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Gkjdexvirfepfx Ab Tof Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guide: Central control, 2 roller tracks Jointing unit: 2 x 0.75 kW 200 Hz, including joint cutter set in DIA version, manual positioning via Siko counting dial, max. 3 mm stock removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing unit for hotmelt adhesive and PU application option, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1st roller powered, 2 free-running rollers for excellent and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotation, 3-position setting for chamfer/radius (R2), overhang and straight edges. Max. 3 mm edge thickness with Siko counting dial Profile scraper: max. 3 mm edge thickness Surface scraper: Reversible knife Chain width: 80 mm Edge material (roll): 0.4 – 3 mm End trimmer device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: for workpiece thickness 8–22 mm: 70 mm; for 23–40 mm: 120 mm (dependent on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed rate: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock K 36 – top specification with motorized adjustment – showroom model – as-new machine – – immediately available – This perennial favorite from Hebrock offers unprecedented possibilities. Designed for the highest demands, the K 36 stands for absolute reliability and productivity in daily operation. The option to equip the machine with a profile cutter and a multi-radius scraper sets new standards in perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min./max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power input: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Gjdpei Am Uksfx Ab Tekf Features: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application onto the workpiece for edge material up to 3 mm; joint trimming unit (incl. carbide-tipped tool) up to 3 mm trimming depth, maintenance-free, coated glue pot with quick-change system incl. glue discharge device, HF double-motor end trimming station (approx. 12,000 rpm), HF trimming station (approx. 12,000 rpm) with pneumatic adjustment and interchangeable cutter head (combi design), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift-up device), buffing station, robust chain feed, ball-bearing mounted double pressure rollers, aggregate inspection windows on both the rear and operator sides, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, banding up to 60 mm workpiece thickness. Equipment Options: 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separator spraying device 36/24/2 Cleaning agent spraying device 36/25 Edge protection spraying 36/27 Nesting (1x trimming station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF trimming station (R2/R1 /chamfer) 36/45 Axis package for motorized panel/edge thickness and joint trimming depth adjustment Location: ex-stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 guarantees edge processing at every stage, as it comes equipped with all the components you need to meet your requirements: jointing cutter, cross-cut saw, milling unit, radius scraper blade, corner rounding unit, flat scraper blade, and buffing station. For even greater flexibility in achieving a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min F5 Next Edgebander With PLC control (including touchscreen) and hot-melt glue application directly to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tooling) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change feature including glue drain, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combi version), corner rounding unit, radius scraper blade, flat scraper blade (including pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Gsdpfoi Anadox Ab Tokf F5/08/4 Quick-change device for corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tooling F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spray unit F5/27. Nesting for milling and radius scraper blade F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024