Stroji za brušenje robov in profilov nakup rabljenega (9)

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Location: Available ex stock 54634 Bitburg Gksdovk R Arspfx Ab Tjf - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Langzauner Edge Sanding Machine EK 3/4, Top Condition Accessories: several sanding belts included Gkedpjvr Hw Isfx Ab Tef Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Powered feed Veneer sanding Round sanding support Oscillation Height adjustment: manual, table Sanding belt tiltable: Yes Conformity marking: CE mark Total connected load: 4.6 kW Space requirements: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: ex stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. Gedpfx Aod R Ev Dob Tekf • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Location: In stock at 54634 Bitburg - free loading - Can be shipped for a fee

Stanje: novo, Leto izdelave: 2025, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Gkjdpfx Aeff Ed Teb Tjf Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations Gkjdpfefig Rwex Ab Tsf 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Gsdjlht H Nspfx Ab Tskf Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" Godpfxjhqb Rco Ab Tokf 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Oscillating sanding belt for optimal sanding results Article number: 5390020 Brand: Holzkraft Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Godpov Sk Nnofx Ab Tskf Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Miter gauge

Stanje: dober (rabljeno), Leto izdelave: 1997, Proizvajalec: MABO Model: BABY S.A.S. BABY 80 Tip stroja: Robna brusilka Tehnični podatki Razdalja med valji: 1.050 mm Največja širina brusnega traku: 120 mm Število hitrosti: 1 Glavni motor: 1,1 kW Brusni trak v vodoravni legi Nastavljiv brusni trak Navpično navzgor Teža cca: 95 kg Prostor za namestitev (dolžina): 2,65 m Prostor za namestitev (širina): 0,55 m Prostor za namestitev (višina): 1,1 m Gksdpfx Aboxgvcxo Tsf Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -