Brusilni stroji za les nakup rabljenega (18)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Gedpfed R Ev Dox Ab Tokf Location: In stock at 54634 Bitburg - free loading - Can be shipped for a fee

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: Gkodpfxjvk R Arj Ab Tef - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Location: Available ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Langzauner Edge Sanding Machine EK 3/4, Top Condition Accessories: several sanding belts included Gkjdpfxjvr Hw Io Ab Tsf Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Powered feed Veneer sanding Round sanding support Oscillation Height adjustment: manual, table Sanding belt tiltable: Yes Conformity marking: CE mark Total connected load: 4.6 kW Space requirements: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, for processing smaller parts, primarily solid wood Simple and safe operation Combination sanding unit with sanding shoe for calibrating solid wood Control panel located at the front Standard with ribbed steel roller, Ø 120 mm, and hard sanding shoe with graphite layer on replaceable insert Motorized height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor start Mechanical display of table position Ammeter for displaying current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding tasks on solid wood Model BBS 630 C Item No. 5343065 Technical Data Working width: 630 mm Working roller diameter: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Gkjdpfxjcnw U Ro Ab Tof Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed drive motor: 0.43 kW Table height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Belt blower operating pressure: 8 bar Extraction connection diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (L x W x H): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving at warehouse 54634 Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Compact wide belt sander with combination sanding unit With special features package – Top condition – Special features package: - On/off switching of the sanding shoe from the control panel Gkodpfexac E Hex Ab Tsf - On/off switching of the drum from the control panel - Electronic control Fox 500 KTR - Table extension with two rollers for infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard-equipped with diagonally grooved steel drum Ø 120 mm for calibration Fine adjustment of working height Clear, user-friendly control panel at the front Robust tube-reinforced monoblock steel machine body, robot-welded, with working units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment option for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel drum Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding of solid wood, particle boards, and veneer Technical data Length (product) approx. 1388mm, height (product) approx. 1668mm Width/depth (product) approx. 1545mm Dust extraction connection Suction nozzle diameter 140mm Electrical data Supply voltage 400V, current type AC Phase(s) 3Ph, mains frequency 50Hz Feed motor power 0.33 / 0.55kW Table height adjustment motor power 0.25kW Drive motor power 7.5kW Sanding unit Sanding belt length 1525mm, max. sanding width 950mm Sanding belt width 970mm Feed unit Feed speed 4.5 / 9m/min Workpiece Min. workpiece height 4mm, max. workpiece height 170mm Location: ex stock 54634 Bitburg – immediately available –

Leto izdelave: 1988, Stanje: rabljeno, številka stroja/vozila: 01910/88, Eugen Laegler Floor Sanding Machine Model: Vibrafor Motor Power: 1.1 kW Voltage: 220 V Godpfecb Au Sox Ab Tjkf Vibrating sanding surface Dust bag included Location: 54634 Bitburg – inspection possible

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” Gedpfx Abofig Rwe Tskf This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2025, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Gkedpfx Abeff Ed Tj Tef Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2025, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Gsdpfx Absff Hdfo Tskf Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Stanje: novo, Leto izdelave: 2025, Automatic Sander KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structuring unit Robust 3-wide belt sander for the highest demands Consistent working height thanks to upper section adjustment Working width: 1350 mm Pass-through height max.: 205 mm (up to 18.5 kW main drive motor) Abrasive belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Abrasive belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" – Contact Roller - Grooved rubber contact roller, hardness 80 Shore - Contact roller height continuously adjustable via touch screen - Motorized lifting/lowering of the contact roller depending on aggregate selection - Increased belt speed Unit "Ed-L" – Diagonal Pad - Electronic sanding pad with 22 mm segment width (special pivoting version), with variable edge pressure, automatic pressure regulation, and segment memory - Continuously adjustable belt speed (PLC-stored) - Additional sanding pad insert Unit "Xi-L" – Cross Sanding Unit Integrated in Machine Body - Electronic sanding pad with 22 mm segment width, variable edge pressure, automatic pressure regulation, and memory for sanding pad segments - Cross sanding belt supported by lamella belt - Continuously adjustable belt speed (PLC-stored) Perfect-3 1350-REdXi-LL Main motors: - 1st unit: 18.5 kW (25 HP) - 2nd unit: 11 kW (15 HP) - 3rd unit: 16 kW (MPM) (22 HP) 400 V / 50 Hz Workpiece feed: - Fabric-reinforced rubber conveyor belt - Rubberized conveyor drive roller - Motor: 2.2 kW (3 HP) / 400 V / 50 Hz - Speed: infinitely variable 3 - 15 m/min Vacuum system: - On feed table - Additional perforation of conveyor belt over 200 mm - Vacuum generator: 2.2 kW (3 HP) / 400 V / 50 Hz Abrasive belt cleaning: - Air knife for cleaning the abrasive belt in "Ed-L" and "Xi-L" units, cycle-controlled, with extraction channels, driven by blower 1.1 kW (1.5 HP) 400 V / 50 Hz Pressure elements: - Infeed: parallel spring-mounted, ground steel pressure roller ⌀ 50 mm - Between units: rubberized pressure roller ⌀ 50 mm - Outfeed: rubberized pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 Shore 2. Diagonal sanding pad with paint configuration and air knife for belt cleaning 3. Cross sanding unit with paint configuration and air knife for belt cleaning Gkodpfor Hr Dzsx Ab Tsf Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring unit at outfeed B 10: Abralon structuring brush, Mink W71: Additional quick-change shaft for 1350 mm brush B 12: Brass-coated steel wire brush 1350 mm C 10: LED package A 20: 5 x motorized adjustment dampers (2x D=180 + 3x D=150 mm) Working width: 1350 mm Max. workpiece height: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10” touch screen with Industry 4.0 control Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Gksdpfxjlht H No Ab Tof Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Quick-release belt tensioning via lever Upper belt support with graphite coating 250 mm large, balanced belt drive rollers ensure optimal power transmission. With electric height adjustment With dust extraction and noise protection devices With noise protection certificate With two speeds Tilting sanding shoe adapts to surfaces Godpfxsff Hdbj Ab Tokf Beveled surfaces Standard with right and left run The quick-release belt tensioning enables fast and easy sanding belt changes. Delivery is partially assembled Dimensions and Weight Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Worktable(s) Worktable height adjustment: 620 mm Maximum working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-ph Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height workpiece longer than worktable: 180 mm Explanation regarding max. height of workpiece longer than worktable: Processing of the workpiece with an overhang to the right beyond the worktable is possible.

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Oscillating sanding belt for optimal sanding results Article number: 5390020 Brand: Holzkraft Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Gkodpfx Ajv Sk Nnsb Tof Miter gauge

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. Godpehqb Rcofx Ab Tskf The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Johannsen tračni brusilni stroj T 82 - K Pneuma - Brusna blazina z zračno podporo - Maks. dolžina obdelovanca: 2800 mm - Širina mize: 950 mm - Glavni motor: 5,5 kW - Motor ventilatorja: 2,2 kW - Širina brusilnega traku: 160 mm - Premer priključka za odsesavanje: 180 mm Gjdpfx Asxpmtyjb Tekf - Desni/levi tek - Nastavljanje z ročnim kolesom - Skupne mere (D/Š/V): 4080x1800x1400 mm - Masa pribl. 1000 kg Lokacija: iz lokacije v Saarlandu - takoj na voljo -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Gksdpogf Sw Nofx Ab Tef Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: dober (rabljeno), Leto izdelave: 1997, Proizvajalec: MABO Model: BABY S.A.S. BABY 80 Gsdpsxgvcxofx Ab Tekf Tip stroja: Robna brusilka Tehnični podatki Razdalja med valji: 1.050 mm Največja širina brusnega traku: 120 mm Število hitrosti: 1 Glavni motor: 1,1 kW Brusni trak v vodoravni legi Nastavljiv brusni trak Navpično navzgor Teža cca: 95 kg Prostor za namestitev (dolžina): 2,65 m Prostor za namestitev (širina): 0,55 m Prostor za namestitev (višina): 1,1 m Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Gksdpfx Abscr S Ece Tof Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price