200/70 TON STISKALNICA ZA STEBRNE HIDRAVLIČNE OMETE

CRONOSSTECH CHKSP 200/70

Leto izdelave: 1974, Stanje: rabljeno, Druck: 340 t Hubweg: 200 mm Tischgröße unten: 100 x 800 mm Bdedpfx Afe Du Uwsqsk Abstand oben/unten: – offen 510 mm (Lichte Weite) – geschlossen 310 mm Neue Hydraulik- und Elektroanlage

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Bjdpfsvvvw Esx Afqedk Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Leto izdelave: 1982, Stanje: rabljeno, Pressure: 150 t Throat depth: 350 mm Stroke: 20-120 mm Strokes per minute: 40-60 Ram adjustment: 85 mm Table surface: 1050x690 mm Ram surface: 650x320 mm Passage hole in table: 325x200 mm Table height: 850 mm Bodpolp U Iwsfx Afqodk Pin hole in ram: Ø 50 mm Machine weight approx.: 8.6 t Space requirement approx.: 2500x2500x2900 mm Manual central grease lubrication Pneumatic clutch-brake combination Mechanical overload protection (shear plate) in the ram Two-hand operation Foot operation

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, globina grla: 440 mm, nastavitev hidravličnega cilindra: 110 mm, skupna višina: 18.200 mm, širina mize: 800 mm, dolžina mize: 1.100 mm, skupna širina: 24.000 mm, skupna dolžina: 37.200 mm, skupna masa: 12.600 kg, stiskalna sila: 200 t, tabela razdalj do bata: 400 mm, moč: 15 kW (20,39 KM), Plunger stroke: 40–180 mm Bodpfx Afetu Hvwjqsdk incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 per min Distance table/ram – adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Stanje: rabljeno, Leto izdelave: 1991, Pressing force 1,500 kN Bjdpfx Afjrm Nqmsqodk Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes per minute Further data and images available on request Used, the press is currently completely disassembled. Not operational and requires mechanical and electrical overhaul.

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Bsdpfot Hw Dwox Afqedk Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rolldruck Stufenlos regelbar von 117 kN Vorschub - Feinverstellung 0,5-45 mm/min Bdsdpoxukrqjfx Afqjk Drehzahl 0-80 U/min Schwenkwinkel der Rollköpfe 11 ° Durchmesser der Rollspindeln 69,85 mm Hub - Rollspindelschlitten 0-150 mm min. Abstand - Rollspindeln 138 mm max. Abstand - Rollspindeln 285 mm min. Durchmesser - Rollwerkzeuge 230 mm max. Durchmesser - Rollwerkzeuge 135 mm kleinster Durchmesser 2 mm größter Durchmesser 55 mm Gewindelänge im Einstechverfahren 200 mm Gewindelänge im Durchlaufverfahren 2000 mm größte Steigung d. Gewindes 4 mm Gesamtleistungsbedarf 14 kW Maschinengewicht ca. 2,4 t Raumbedarf ca. 2,0 x 2,5 x 1,9 m Rollzeit stufenlos einstellbar von: 0,1s Pausenzeit stufenlos einstellbar von: 0,1s Aufnahmelänge der Rollspindeln: 200mm Maschinenbetthöhe: 810mm Rollspindelhöhe über Maschinenbett: 200mm Höhe der Stützlager: 115mm Größte Teilung bei Kerbverzahnung: 2,5mm -(bis 70kg/mm2 Festigkeit d. Werkstoffes)

Leto izdelave: 1991, Stanje: rabljeno, Pressure 150 t Passage width 1100 mm Stroke 500 mm Bodpfx Afslp U R Deqsdk Table area 1100x1070 mm Ram area 1100x1070 mm Through-hole in table 475x450 mm Table height 920 mm Installation height 800 mm Machine weight approx. 8 t Space requirement approx. WxDxH 2000x2000x3600 mm Four-column guided Synchronization control

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.000 t, širina mize: 1.500 mm, dolžina mize: 2.500 mm, obratovalni tlak: 250 letvica, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS - Steel construction frame and components stress-relieved by vibration method - 8-sided slide / guideways for high precision and long service life - PLC control system with touchscreen panel - Argon welding for fastenings and drawn steel tubes - EN ISO 15614-1/2017 welding application certificate approved by WPQR and WPS and accredited by TÜRK-AK (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Parallelism and squareness tolerances are applied according to ISO and DIN standards (≤120 microns per meter) - PARKER / REXROTH hydraulic power unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Dual-hand operation controls - Cooling system SPECIFICATIONS FOR 2000 TON H-TYPE HYDRAULIC PRESS TYPE: Steel construction, 8-guideway H-frame press FRAME MATERIAL: St52 – ERDEMİR SLIDE GUIDING: BRONZE Zr14 CAPACITY (RAM): 2000 TON MOVABLE TABLE DIMENSIONS: 1500 x 2500 mm FIXED TABLE DIMENSIONS: 1500 x 2500 mm PARALLELISM TOLERANCE: 120 micron/m SQUARENESS TOLERANCE: 60 micron/m STROKE (RAM): 1000 mm MIN. DAYLIGHT: 200 mm MAX. DAYLIGHT: 1200 mm STRESS RELIEF: Vibration stress relief WELDING: EN ISO 15614-1/2017 certified, WPQR and WPS approved, accredited by TÜRK-AK (Supervised by EN ISO 14731 certified “welding coordination engineers”) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 180 kW – IE3 MAIN PUMP: 140 cm³ – REXROTH or PARKER RAPID DESCENT SPEED (MOVING TABLE): 150 mm/s PRESSING SPEED (MOVING TABLE): 12 mm/s RETURN SPEED (MOVING TABLE): 170 mm/s MAIN CYLINDER BORE: Ø 720 mm – Ck45 – 2 units AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE HEIGHT OF PRESS: 6300 mm APPROXIMATE WIDTH OF PRESS: 3850 mm APPROXIMATE DEPTH OF PRESS: 2500 mm Bsdpfxsvy A Dyo Afqsdk TABLE HEIGHT FROM FLOOR: 1500 mm PRE-FILL VALVE: NG 200 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFFLINE FILTRATION: REXROTH or PARKER MOTOR CLASS USED FOR UNIT: IE3 LEVEL INDICATOR: REXROTH or PARKER AIR FILTER: REXROTH or PARKER – 10 MICRONS RETURN FILTER: REXROTH or PARKER – 25 MICRONS OIL AND TEMPERATURE INDICATOR: REXROTH or PARKER VALVES USED: REXROTH or PARKER FILTER CONTAMINATION WARNING: ELECTRONICALLY CONTROLLED LUBRICATION TYPE: AUTOMATIC (ADJUSTABLE FROM THE PANEL) RAM STROKE ADJUSTMENT: ADJUSTABLE FROM THE PANEL RAM TONNAGE (PRESSURE) ADJUSTMENT: ADJUSTABLE FROM THE PANEL SYSTEM ERROR INFORMATION: VISIBLE ON SCREEN PRESS STATUS INFORMATION: VISIBLE ON SCREEN DIE MEMORY: ADJUSTABLE FROM THE PANEL HYDRAULIC UNIT OIL TEMPERATURE INFO: VISIBLE ON SCREEN LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 95 TONS

Stanje: rabljeno, Leto izdelave: 1980, Pressure: 250 t Distance between uprights: 2000 mm Stroke: 600 mm Distance table/ram, stroke top: 1000 mm Table area: 1700 x 1300 mm Table height above floor: 800 mm Cushion pressure in table: 100 t Cushion stroke in table: 180 mm Bedpjvut Tnjfx Afqedk Cushion area in table: 1650 x 700 mm Side opening between uprights: 1000 mm Ram area: 1700 x 1400 mm Weight: 31.1 t Required space (WxDxH): 3.3 x 1.9 x 4.85 m Height above floor: 4.55 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in the table, hydraulic stroke damping No foundation pit required Can be offered without commissioning, with commissioning in the given condition, or alternatively with a new Siemens S7-1500 F control system