Odsesovanje kovin in opilkov

CORMAK MDC1500 400V

Stanje: dober (rabljeno), Leto izdelave: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically assisted support rolls Intelligent software: - Ellipse program - U-bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Gbsdpfx Ajvd Dftefqsg Horizontal and vertical operation Horizontal axis diameter: Ø 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Dimensions (approximate): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are made. We recommend verifying all important details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Tube Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5 x D → Maximum bending performance for tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending performance for tube 30 x 30 x 3 mm → Maximum bending performance for tube 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Tube feed length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control’s touch display enables easy, intuitive programming and operation of the system. After loading the tube, it is clamped in the travelling carriage’s chuck. This ensures precise positioning of the tube and thus enables the creation of dimensionally accurate geometries. Standard equipment also includes a check of the tube geometry before the bending process: if the bending process is started in the wrong position, the machine will not issue a release. This prevents operator errors. Optional additional features provide greater convenience and increase output, thereby improving the system’s efficiency. Data exchange from the optional TBS-3D tube calculation program (PC version) is done via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for the bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck for tube clamping in the travelling carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: Godpfotr U Hljx Afqebg → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly at the machine. The control calculates the feed values and the bending angles directly after the length and angle are entered. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB Godpfx Ajttah Refqsbg → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Leto izdelave: 1990, Stanje: dober (rabljeno), Offer 20191 Year of manufacture: approx. 1990, overhauled in 2002 Gbjdpfx Afjhrdmbjqog Technical data: - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bend angle selectable to the left and right - Hydraulic double-sided bending function - Hydraulic feed - Drive: 400 V / 11 kW - Required space: approx. W 1750 x H 2200 x D 2300 mm - Weight: approx. 1600 kg - with bend angle adjustment - Hydraulic clamping - Bending tools

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Max. air flow: 840 m³/h Godpfxowmlgcj Afqobg Connection diameter: 200 mm Drive power: 0.55 kW Very lightly used, 2 units available

Stanje: rabljeno, Leto izdelave: 1999, Premer cevi: 12-54 mm (baker / inox) mm Serijska številka: EBD Način delovanja: Rezanje/ Odstranjevanje igel / Pon Hitrost valjev: 450 obr/min m/min Godpeumyhlefx Afqobg

Stanje: rabljeno, Vacuum lifting device, vacuum lifter Custom-built handling unit for use with an industrial robot Year of manufacture: 2008 Load capacity: approx. 60 kg Suction cup spacing min. 120 x 150 mm Suction cup spacing max. 700 x 600 mm - 4 suction cups, Ø 100 mm Gbjdpsd Aii Uofx Afqjg - 4 vacuum ejectors, PIAB vacuum generators with compressed air connection Ø 8 mm - 2 cross beams, width adjustable via servo drive from 150-600 mm - Suction cup spacing adjustable via 2 servo drives from 120-700 mm - Suction cup adjustment via 3 REXROTH servo motors MSK040C-0600-NN-M1-UP0-NNNN - Highly sophisticated and precise design with linear guides and trapezoidal screw drives - Flange plate for suspension or direct mounting to robot Length: 105 cm, width: 66 cm, height: 54 cm Net weight: approx. 120 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 2012, Exhaust gas filtration system, exhaust filter system, exhaust gas filter, hot gas filter, industrial exhaust filter, air extraction and purification system, filter cleaning system, electrostatic precipitator, filtration unit, oil mist separator, oil mist collector, air filter, mist separator, oil and emulsion mist separator, particulate air filter, industrial filter - Manufacturer: ifs, industrial extraction and purification system, filter type IF-Vario M 1600 - Rated power: 0.75 kW - Suction capacity: 1,600 m³/h - Individual components: see photos Gbodpfjwrcbnox Afqsg - Dimensions: 990/600/H660 mm - Total weight: 100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Premer cevi 28 mm Debelina stene 2 mm Minimalni polmer upogibanja 90 mm Krmiljenje 3D TubeSoft Slim Skupna potrebna moč 3,5 kW Gbedpfx Ajxcuhrofqsg Trenutna nova cena ~ 75.000 EUR

Stanje: novo, Efficient Extraction of Coolant and Lubricant Mists Directly at the Machine Tool The two standard units, AL-KO OIL JET 600 and OIL JET 1200, offer the perfect solution for directly extracting oil and emulsion mist from all common turning, grinding, and milling machines. Fields of Application: AL-KO OIL JET units are used wherever oil and emulsion mists arise during production processes on modern machining equipment and need to be extracted directly from the processing chamber. Depending on the size of the machining area, operating time, and the type of coolant used, either the OIL JET 600 or the higher-capacity OIL JET 1200 model is selected. AL-KO OIL JET units are suitable for all standard cooling and lubricating fluids and can be mounted directly onto the machine tool or placed next to it on an optional floor stand. Gjdpfowwt Tlsx Afqebg Operating Principle: The highly effective filter system in AL-KO OIL JET units is equipped as standard with a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st filtration stage: washable metal mesh filter 2nd filtration stage: filter mat (LoTex®) with frame 3rd filtration stage: main filter cassette (ePM1 80%) The first stage captures coarse particles. The second stage consists of a drained, nano-coated mat that separates and channels off emulsified liquids. The third stage filters out the finest residual particles. The emulsions, predominantly separated in the second filter stage, are collected in the base of the unit and can be discharged. Applications: - Lathes - Machine tools - Chip-removal machines Advantages: - Compact design - High separation efficiency due to three-stage filtration system - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options