Dvojna kapna žaga z podajalnikom

COMEC TD1200 CAF/R

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Bwedpfx Afowhmdfensi Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Stroj za profiliranje parketa po vzdolžni strani 5+5 motorjev Hitrost do 60 m/min Minimalna delovna širina 70 mm (65 mm brez posnetja) Bwedpfoxwnhbjx Afnoi Diamantna orodja za T&G profil + dovodni tračni transporter

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Bedpfx Afjuiwqhonewi Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: rabljeno, Leto izdelave: 2001, - Manufacturer: Barberan - Model: BRB-1400 - Year of manufacture: 2001 Bwedpouyky Tsfx Afnsi - Working width: 1,330 mm - Working height: approx. 880 - 900 mm - Workpiece height: approx. 5 - 100 mm - Operator side: right - Coating roller ~45 Shore - Roller diameter: 245 mm - Application cylinder speed: 4 - 24 m/min - Quick-change system for application roller - Metering roller, hard-chromed: 174 mm - Metering roller speed: 4 - 24 m/min - Reversible drive - Solvent-resistant conveyor belt - Double diaphragm pump - Mobile on flanged wheels - Feed rate adjustable via frequency inverter: 5 - 25 m/min - Length: 985 mm - Width: 2,800 mm - Height: 1,500 mm - Weight: 1,680 kg - Voltage / Frequency: 400 V / 50 Hz - Location: in stock - Machine overhauled in 2022

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, automatic double mitre saw model OMS SALVARANI INVINCIBILE OK 330 used machine working condition: very good for cutting wood, frames, PVC, aluminium, plastic, and various materials oil-pneumatic downward feed of saw units tilt of saw units +/- 45° number of motors: 2, each 3 HP Bjdpfx Ajwqdqnefnswi blade diameter: 330 mm max. usable cutting length: 3500 mm min. usable cutting length: 350 mm max. cutting capacity at 90°: 165 x 115 H mm max. cutting capacity at 45°: 115 x 115 H mm weight: 700 kg voltage: 380/50

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Bsdpfx Aexvbvvsfnswi Pneumatic cross pusher

Stanje: rabljeno, Delovna dolžina 3600 mm Delovna širina 1500 mm Delovna višina cca 900 mm WEINIG povratni sistem RF15 ----- Uporabno za skobeljnike, rezkalne in profilirne stroje z maks. podajalno hitrostjo cca 22 m/min. Tehnični opis: Dolžina obdelovanca: 250 - 3.600 mm Širina obdelovanca: 30-230 mm Vzdolžno-prečno-vzdolžni transporter z 2 integriranima, pogonjenima valjčnima progama: Prečna transportna pot 1.500 mm Konstantna transportna hitrost: 30 m/min Dolžina valjčne proge: 2.200 mm Povratna valjčna proga (nepogonska) do operaterja Bwsdpfoxpn Tnox Afnei (Tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: dober (rabljeno), Koda: 0228 Znamka: OMS SALVARANI Model: 300 INVINCIBILE Pnevmatski dvoglavi prečni rezalni stroj za rezanje lesa, okvirov, stavbnega pohištva, pohištva in različnih drugih materialov Tehnični podatki: Delovna dolžina: 3000 mm Premer rezila: 300 mm Bodpsxnxumjfx Afnewi Moč motorja: 2,5 KM - 3000 o/min Ročno pomikanje obeh glav Rezanje od 0 do 45° desno in levo Pnevmatska stopalka za spuščanje glav 2 pnevmatski vpenjali za pritrditev obdelovancev 2 odsavna nastavka Ø 50 mm Stisnjen zrak: 6 bar Skupne dimenzije: 4000 x 700 x 1250 mm (višina) Teža: 520 kg

Stanje: dober (rabljeno), Leto izdelave: 2010, • Simultaneous top and bottom sanding: with roller and pneumatic sanding shoe units • Double-sided processing of parts: in a single pass • Above-average working speed, reduced labor input, excellent surface finish • Working width (mm): 1100 • Feed drive: 1.5 kW each, frequency-controlled • Height adjustment: 0.75 kW each • PLC: Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, fully automatic adjustment and automatic start of feed and sanding process Bwsdpfx Aew A R U Rsfnji

Stanje: dober (rabljeno), Leto izdelave: 2007, I am selling the four-sided planer GAU-JING 930D-CE. Maximum workpiece size: 300 x 200 mm! Feed speed up to 36 m/min! 5.00 m long infeed table! 9-spindle configuration: Bottom: 11 kW (15 HP) / 6,000 rpm Bottom: 11 kW (15 HP) / 6,000 rpm Right: 7.5 kW (10 HP) / 6,000 rpm Bedpfx Aercb T Tefnjwi Left: 7.5 kW (10 HP) / 6,000 rpm Right: 7.5 kW (10 HP) / 6,000 rpm Left: 7.5 kW (10 HP) / 6,000 rpm Top: 11 kW (15 HP) / 6,000 rpm Top: 11 kW (15 HP) / 6,000 rpm Bottom: 11 kW (15 HP) / 6,000 rpm Feed motor: 11 kW (15 HP) Total installed power: 100 kW / 160 A Total weight: 10,000 kg. Maximum workpiece size: 300 x 200 mm! Planer heads and accessories are included in the price—with 3 hydro heads. Electronic controls for working width, working height, and the height of the pressure zone. Feed speed adjustable via inverter. Feed rollers integrated into the table. 13-zone pneumatic material pressure system for feed. Available immediately. Condition: very good. Inspection possible. Full documentation and CE certification included.