Sredinski stružnica in stružnica za vreteno

COLCHESTER STUDENT 2500VS

Stanje: rabljeno, Leto izdelave: 1972, Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,000 mm Spindle speeds: 12.5 - 2,000 rpm Spindle mount: Bayonet 55022 Spindle bore: 47 mm Feeds – longitudinal: 0.07 - 4.16 mm/rev Feeds – cross: 0.035 - 2.08 mm/rev Metric threads: mm pitch Imperial threads: 2 - 24 TPI Kdjdevzhhyepfx Adisw Rapid traverse – longitudinal/cross: 3.4 / 1.7 m/min Spindle motor: 11 kW Drive power: 13 kW Machine weight: approx. 2.8 t Space requirements: approx. 2.8 x 1.2 x 1.5 m 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 200 mm Two-axis digital readout ANILAM WIZARD LATHE – retrofitted in 1992

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Ksdov A Sqhjpfx Adijdw Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Kdedpfx Adok Egrpeiew Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Kdedpfx Adswudhueiew Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Colchester Student 2500 3-osni digitalni prikaz Vpenjalna naprava za vpenjalne tule Kjdpfsw R S Awsx Adiodw Razni dodatki

Stanje: novo, Leto izdelave: 2025, For up-to-date prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 4450 mm Width/Depth (product): approx. 1150 mm Height (product): approx. 1650 mm Weight (net): approx. 3000 kg Working Ranges: Centre height: 280 mm Centre distance: 2910 mm Kdsdpfx Adeq Ukc Rsiew Swing diameter over bed: 560 mm Swing diameter in gap: 790 mm Swing diameter over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 1600 rpm Electrical Data: Drive motor power: 7.5 kW Connected voltage: 400 V Mains frequency: 50 Hz Coolant System: Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar capacity diameter: 80 mm Tool post mounting height: max. 25 mm Spindle taper: MK 7 Tailstock: Tailstock taper: MK 5 Tailstock quill travel: 180 mm Tailstock quill diameter: 75 mm Threads: Metric thread pitch: 0.2 – 14 mm/rev Number of metric pitches: 47 Inch thread pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Travel: Top slide travel: 130 mm Cross slide travel: 316 mm Bed slide travel: 2710 mm Feeds: Longitudinal feed range: 0.059 – 1.646 mm/rev Number of longitudinal feeds: 35 Cross feed range: 0.020 – 0.573 mm/rev Number of cross feeds: 35 Electrical Connection: Total connected load: 8.5 kW

Stanje: novo, Precizni vodilni in vlečni vretenasti stružnica Proizvajalec: OPTIMUM Model: OPTiturn TZ 4V Art. št.: 3432245 Stanje: Nov stroj Višina konice: 200 mm Razdalja med konicama: 800 mm Obratov: 50 - 3.000 min⁻¹ brezstopenjsko nastavljivo prek 2 stopenj menjalnika s SIEMENS inverter variabilnim pogonom Standardna oprema: - 3-osni digitalni prikazovalnik DPA 32 - digitalni prikazovalnik vrtljajev na vretenu - fiksni centrirni konus MK 3 - hitromenjalni nosilec orodja velikost B - nosilec stružnega noža BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm Kdsdpfjg Hkmrox Adiow - gibljiva luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za ostružke - LED strojna svetilka - servisno orodje

Stanje: novo, Leto izdelave: 2025, For information regarding delivery times and current daily prices, please inquire directly. Condition: New machine Center height: 200 mm Distance between centers: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Standard equipment includes: Kjdeq Ui Tdspfx Adiedw - 3-axis digital readout DPA 21 - Machine base - 3-jaw chuck 200 mm - LED work light - Reduction sleeve MK 4/MK 6 - Fixed center MK 4 - Fixed steady rest - Follow rest - Quick-change tool post base body E - Tool holder ED - Chuck guard, electrically interlocked - Oil filling - Operating tools - Operating manual

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed: 330 mm Swing diameter over saddle: 210 mm Turning length: 1000 mm Centre height: 167 mm Spindle bore: 40 mm Drive power: 2.2 kW - New machine - with 3-axis digital readout ACU-RITE and Ksdjwp Tq Ujpfx Adisdw MULTIFIX quick-change toolpost, size MA * For more information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Kdsdpju Ix D Aofx Adisw Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center