Peskalna turbina

Cogeim PG 10x15/2TR 320mm

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Elementi: elektro omare, strojno ohišje (kabina, turbine, iztok, vtok), oder s pripravo in zalogovnikom, zvočno izolirana kabina, udarni zaboj, vedrovo dvigalo, rešetke, lestev, predhodni udarni zaboj, drobni deli, cevovod, kabelske kanale, peskalno sredstvo in rezervoar za ponovno polnjenje. Priključek za stisnjen zrak: 1/2 palca pri 4-6 bar, poraba stisnjenega zraka: ca. 1,5 m³/h, pripravljen po DIN ISO 8573-1, velikost trdnih delcev: 1 µm, gostota: 1 mg/m³, vsebnost vode: tlakovna rosišče 3°C, vsebnost olja: 1 mg/m³, dolžina: 11.000 mm, višina: 5.907 mm. Z dokumentacijo. Ogled na lokaciji je možen. Isdpfx Aboxtprtexjau

Leto izdelave: 2025, stanje: novo, ASK - 0 Hanger Type Shot Blasting Machine This machine is used for polishing of sheet and metal parts after pressing and heat treatment, cleaning and roughening of castings, preparation prior to painting and rubber coating, transferring forged parts onto trolleys, and refurbishment of used parts. (Workpiece Capacity x Diameter): Ø: 800 H: 700 Equipped with 2 turbines, each Ø 325 mm, 6-bladed. The blasting cabin is manufactured from ST-37 grade steel sheet, with the high-wear zones reinforced using Brinell or manganese wear plates. The inside of the cabinet is lined with rubber sheets to protect against abrasion during the blasting process; these are mounted to the cabinet with clamping strips. (Fully manganese armored internal lining is available as an option.) The wear plates are of a bolted (screw-in) design, allowing easy replacement by authorized personnel when necessary due to wear. The machine cabin doors, offered in both pneumatic and manual versions, are double-winged design for convenient access. Iaedpfjvkf Agjx Abxou To ensure operator safety, the doors feature an interlock system to prevent them from being opened during the shot blasting cycle. Additionally, a sensor or switch is integrated into the door mechanism, which halts the blasting operation if the door is open. The system is fitted with a rail conveyor, suspension gear mechanism, and (optionally) a crane, enabling easy transfer and handling of workpieces within the machine cabin. A fully automated electrical panel is included, featuring Siemens or Schneider components. Machine operation is controlled via a 10” PLC touchscreen display.

Stanje: rabljeno, Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-position angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: Isdpfxjq Nipye Abxoau - 4 mandrels - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine dimensions (LxWxH): 400 x 100 x 120 cm Machine weight: 1500 kg

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A Gutmann blasting machine, completely overhauled by Rösler in 2019, is available. Documentation is included. An on-site inspection is possible. Iedpfx Aowftcpobxoau

Leto izdelave: 2025, stanje: novo, The Pass-Through Hanging Shot Blaster is an automatic surface cleaning system primarily used for removing rust, scale, paint, or other contaminants from metal surfaces. In this system, components are suspended on an overhead conveyor and continuously transported through the blasting chamber, ensuring high efficiency and consistent processing quality. ⚙️ Operating Principle Loading: Components are hung on rotating hooks or hangers attached to the overhead conveyor. Transport: The conveyor automatically moves the components into the shot blasting chamber. Blasting Process: Inside the chamber, high-speed turbines propel steel shot or other abrasive media onto the surface of the components. This effectively removes rust, scale, burrs, old paint coatings, and other contaminants. Hook Rotation: Isdpfjxuhf Ijx Abxsau The hooks typically rotate to ensure even cleaning of the entire surface of the component. Unloading and Abrasive Recovery: After blasting, the components exit the chamber. The used abrasive is recovered and recycled, while dust is extracted by a filtration system. CODE W: H: Turbine ASK-KON - 1 1,000 x 1,000 4 x F400 ASK-KON - 2 1,000 x 1,500 6 x F400 ASK-KON - 3 1,000 x 2,000 8 x F400 ASK-KON - 4 1,500 x 3,000 12 x F400 ASK-KON - 5 1,500 x 4,000 12 x F500

Stanje: novo, Notranje mere 945 x 605 x 605 mm Delovni tlak 2,2 - 5,5 bar Dimenzije D x Š x V 1,0 x 0,61 x 1,65 m Največja velikost paketa 1300 x 1000 x 750 cm Poraba zraka 250 l/min. Teža stroja cca 0,09 t Ta peskalna kabina je standardno vključena. Peskalna pištola 4-delni komplet šob Komplet rokavic Iajdpfx Ajupw Smjbxeu Osvetlitev Komplet zaščitnih folij Nožno stikalo. Regulator tlaka Odvod z mikro filtrom

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Isdpow Ivpvofx Abxsau

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine so iz sistema Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbine - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izstopu - 70 m/s. Turbine po generalni obnovi, uporabljeni originalni rezervni deli. Peskalni stroj, peskalnik, turbinski peskalnik. CENA ZA 1 KOS - 3000 EUR. Iedpfx Absvphf Uexsau

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Nudimo obnovljene turbine iz kontinuirnega peskalnika Rösler RRB 22/5-L. Tip turbine - Hurricane H42. Turbine so obnovljene z originalnimi rezervnimi deli iz orodnega jekla. Peskalnik, stroj za peskanje, peskanje, metanje, mečeča turbina. Iedpfjyy Rybsx Abxsau

Leto izdelave: 2005, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, We offer this used Technical Nowa Sól OWPS 4.3x3.8x3.0 wheel blast machine, year of manufacture 2005. The machine is complete and in working condition (currently disconnected from power supply), and comes with a dust collector for the blasting chamber. Maximum weight of items to be cleaned: 250 kN Maximum load dimensions with table rotation and turbine blasting: φ3500×2000 mm Maximum load length without table rotation and with pneumatic blasting: 4300 mm Maximum load width without table rotation and with pneumatic blasting: 3800 mm Maximum load height without table rotation and with pneumatic blasting: 3000 mm Number of blast turbines: 4 units Output per blast turbine: 350 kg/min Drive power per blast turbine: 22 kW Recommended abrasive: cast steel shot or stainless steel shot Recommended abrasive grain size: 0.2–2.0 mm Pneumatic apparatus tank capacity: 200 liters Pneumatic apparatus nozzle diameter: 11 mm Compressed air pressure: 0.4–0.6 MPa Compressed air demand for the blast machine: 0.4 m³/h Compressed air demand for dust collector regeneration: 10 m³/h Compressed air demand for pneumatic cleaning: 8 m³/h Type of dust collector: dry filter bag (nonwoven), regenerated by compressed air pulse Iedpfx Aoy I Rq Nebxoau Installed power (excluding dust collector fan): 130 kW Supply voltage: 400/230 V Supply frequency: 50 Hz For questions or further information, please send a message or contact us by phone.