CNC delilna glava s krmiljenjem koračnega motorja

CNC-Teilapparat NCT 100

Leto izdelave: 1983, Stanje: pripravljen za uporabo (rabljen), Was used for reworking profile rolls for a hot rolling mill, was regularly maintained, includes accessories, without spare parts, on-site inspection is possible, no videos available. Gjdpfxsriwfij Afqobg

Leto izdelave: 1985, Stanje: delavnici obnovljeno (rabljeno), REFORM Type AR 10 Model 40H Surface Grinding Machine Year of manufacture: 1985 Gbjdpfjd E Np Esx Afqeg 30 kW grinding motor Modicon control unit 6-step magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Infinitely adjustable grinding motor infeed: 0.01 mm – 0.1 mm Hydraulic oscillating drive New power supply cables between machine and control cabinet

Stanje: novo, Leto izdelave: 2025, Cutting speed: 35 m/s Gsdpjvuuvkjfx Afqsbg Grinding height: 210 mm Workpiece length: / mm Machine weight: approx. 210–260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the outer circumference or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or profiled grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, home workshops, laboratories, training demonstrations, etc. TECHNICAL DATA Maximum stock removal: not more than 0.03 mm Maximum peripheral speed of grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm Table T-slot: 1-12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forward/backward and left/right. The grinding head can be raised and lowered vertically. The entire machine is built with high rigidity. The grinding head runs smoothly. Compact design and low noise emission. The work enclosure is available separately. The machine is lubricated using a manual oil pump. To lubricate, simply pull out the handle. If you need other special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: The radial run-out of the taper bore axis at a distance of 100 mm from the proximal end of the main spindle is 0.01~0.02 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Universal Tool Grinding Machine Michael Deckel S11 – Very Good Condition!! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1651 Clamping Range: >> Mounting surface of tool carriage: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter when free-standing in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width machine base: 12 mm >> T-slot width grinding head, tool carriage, and accessories: 8 mm Movement Range: >> Working travels Grinding stroke: 190 mm Grinding stroke for spiral grinding: 190 mm Cross movement of tool carriage: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels Tool holder: 220 mm Grinding head support: 800 mm Universal dividing head on tool carriage: 330 mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding Spindle: Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (D x W x H): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and Equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding attachment SK40 >> Handwheel device for tool carriage >> Extraction unit Gsdpfx Aem E T Ansfqobg >> Machine lamp About the Machine: For sale is a universal tool grinding machine from the brand Michael Deckel S11. The machine is designed for grinding highly precise parts. The S11 allows for surprisingly fast, economical, and flexible grinding of single parts and small series, while offering maximum operator comfort. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.

Leto izdelave: 1981, Stanje: rabljeno, Manufacturer: Deckel Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal travel (X-axis): 700 mm Cross travel (Y-axis): 400 mm Gbodpfx Ajihp U Dsfqog Vertical travel (Z-axis): 450 mm Spindle overhang: 50–450 mm Spindle taper: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5–1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5–1600 rpm Machine weight: 2000 kg Feed rates X/Y/Z axes: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table size: 1000 x 470 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Compact precision CNC rotary table, suitable for single-part or small batch production in fine mechanics. Can be mounted horizontally or vertically. You cannot buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, slotting, milling, or use on a tool or surface grinding machine. Square, hexagonal, and gear milling of any division, or 3D machining, are possible. Precision worm gear drive with 100:1 ratio. Output torque well over 25 Nm. The drive is provided by a controlled stepper motor with 1.8 degree step angle, 3.2A current, holding torque 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest adjustment precision. The pair is supported by four ball bearings, set with no backlash and is also adjustable. The solid, one-piece output spindle is equipped with a faceplate (d=108 mm) featuring an internal taper MK1 and 10.3 mm through bore (optional internal thread M12). The electronic control unit included in the package is a handy module with 14 travel programs, 2 reference point operations, step monitoring, and a power supply. Optimised pre-programming is possible in 360 (for milling operations), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, and 0.02 degree incremental repeat cycles. Forward and reverse operation as well as cycle pauses are, of course, programmable. With the software, you can program travel programs and cycles, configure absolute or incremental movement values, and continuously monitor the actual position of the rotary axis. Via an output, you can receive start impulses from your NC machine. This allows for fast and easy manufacture of complex scale graduations, cross holes, or gears. Godpfx Ajd Erdrefqebg Additionally, you can now sequence multiple different movement angles with a single start pulse, e.g.: incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees—with or without pauses, as well as reverse movement. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron, or Gravograph. NEW: All 16 movement steps, as well as start and reference commands, can now optionally be externally controlled by your NC controller via M-functions. Optional: Air purge system with splash guard. We can offer standard clamping devices for your applications, and additionally can manufacture custom clamping fixtures quickly and cost-effectively to meet your specific requirements. Optional Accessories: Three-jaw chuck 80 mm: €125 #600011 Three-jaw chuck 100 mm, through bore 25 mm, with adapter plate (center height raised to 80 mm): €300 #600021 Tailstock, adjustable height 60–80 mm: €150 #600030 Mount for ER 25 collet chuck with nut: €125 #600031 USB data cable for programming via PC: €150 #600032 Programming of your travel angles: €40 #600033 Test travel program & final inspection protocol: €100 #600036 ER 25 collet set up to D16 mm, 10 pcs: €125 #600037 Mount for ER 32 collet chuck with nut up to D20 mm: €125 #600097 Control cable with magnetic switch (reed contact) for automation without NC machine output: €25 #600099 Acceptance / program / aluminium case / software setup: €80

Stanje: pripravljen za uporabo (rabljen), The machine is in very good condition and can be tested on site. Technical data - Grinding machine Working area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (rpm): 5000 Feed rate (strokes/min): 150 Table load capacity (kg): 20 Control system: BOSCH Godjwvgidspfx Afqsbg Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20 or 1:50, suitable for rough grinding. If you have any further questions, please feel free to contact me.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). Gsdpfxer Ix Ige Afqobg 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Stanje: generalkompletno obnovljen (rabljeno), FLACHSCHLEIFMASCHINE 3000 x 300 mm ALPA RVA 3000 Gbodpfx Afodwn Tpsqog Leistung: 15 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Dolžina mize 160 mm Širina mize 130 mm Premer brusnega kolesa 250 mm Gbedpoxvdtdsfx Afqsg Skupna potrebna moč 1 kW Teža stroja pribl. 1 t