CMZ TTL66
CMZ TTL66

Leto izdelave

2025

Stanje

Rabljeno

Lokacija

Španija

Osnovni podatki

Oznaka stroja:: CMZ TTL66

Proizvajalec:: CMZ

Model:: TTL66

Leto izdelave:: 2025

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Španija

Pokliči

Tehnične podrobnosti

Dimenzije in teža

Skupna masa:

11.000 kg

Skupna širina:

2.377 mm

Skupna višina:

2.289 mm

Vretena

Največja hitrost vretena:

4.000 obr/min

Obdelovalni material / izdelki

Največja dolžina izdelka:

2.860 mm

Specifikacije osi

Potovalna razdalja osi X:

240 mm

Pomik osi Y:

800 mm

Pomik po osi Z:

800 mm

Dodatne podrobnosti

Število osi:

Podrobnosti ponudbe

ID oglasa:: A22140942

Referenčna številka:: ES-TUR-CMZ-2025-00001

Posodobitev:: nazadnje dne 16.07.2026

Opis

To 10-osno stružno-rezkalno središče CMZ TTL66 je bilo izdelano leta 2025. Ima največji premer za zamah 800 mm in največji premer struženja 515 mm. Stroj je opremljen z dvema vretenoma in dvema Y-osnima revolverjema, kar omogoča sočasno obdelavo s štirimi orodji. Če iščete vrhunske zmogljivosti struženja in rezkanja, razmislite o našem CMZ TTL66, ki ga ponujamo v prodajo. Kontaktirajte nas za več informacij o tem stroju.

• Splošno
• Največji premer za zamah: 800 mm
• Največji premer struženja: 515 mm
• Razdalja med konicama vpenjalnih vreten: 614 mm
• Vgrajena moč: 35,5 kVA
• Kapacitete rezervoarjev: hladilna tekočina 510 l, mazalno olje 18 l, hidravlično olje 100 l
• Pomiki osi
• Zgornji revolver (T1): X1 240 mm, Z1 800 mm, Y1 ±45 mm
• Spodnji revolver (T2): X2 240 mm, Z2 800 mm, Y2 ±45 mm
• Osi protivretena: X3 mm, Z3 580 mm
• Hitrost hitrih premikov
• X-osi: 30 m/min
• Z-osi: 30 m/min
• Y-osi: 20 m/min
• Pospešek osi
• Vse linearne osi: 1 G (9,8 m/s²)
• Glavno vreteno
• Tip: integriran vgradni motor
• Velikost vpenjalne glave: 210 mm
• Vreteno nos: ASA A2-6
• Prehod palice: 66 mm
• Vrtina vretena: 72,5 mm
Tedpozd Aarefx Aiqsc
• Notranji premer vlečne cevi: 66 mm
• Premer ležaja: 170 mm
• Moč (maks. / S3 25 % / S1): 35,5 / 28,3 / 23,5 kW
• Navor (maks. / S3 25 % / S1): 205 / 180 / 150 Nm
• Pomagalno vreteno
• Največje število vrtljajev: 4.000 min⁻¹
• Prehod palice: 66 mm
• Vrtina vretena: 72,5 mm
• Notranji premer vlečne cevi: 66 mm
• Premer ležaja: 170 mm
• X3-premik: ±120 mm
• Z3-premik: 580 mm
• Moč (maks. / S3 25 % / S1): 35,5 / 28,3 / 23,5 kW
• Navor (maks. / S3 25 % / S1): 205 / 180 / 150 Nm
• Revolverji (zgornji in spodnji)
• Število postaj: 24
• Število gnanih orodij: 12
• Velikost orodja: 20 × 20 mm / 25 × 25 mm
• Čas indeksiranja: 0,1 s
• Vpenjalna sila: 3.200 kgf
• Premer Curvic sklopke: 150 mm
• Gnanih orodij
• Tip motorja: vgrajen sinhronski motor
• Največje število vrtljajev: 12.000 min⁻¹
• Moč (maks. / S1): 14 / 10 kW
• Najvećji navor (maks. / S1): 42 / 32 Nm
• Hlajenje: popolno oljno hlajenje
• Standardni držalo orodja: NT-55
• Konstrukcija
• Visoko zmogljivo 60° poševno ležišče iz GG-25 sive litine, FEA optimizirano
• Teža ležišča: 4.450 kg
• Linearna vodila z NSK valji in prednapetimi krogličnimi vreteni
• 8 integriranih, z oljem hlajenih motorjev
• Termično stabilna zasnova z vreteni v 90° kotu glede na X–Z-ravnino
• Hladilni in toplotni management
• Moč oljnega hladilnika: 5.000 W
• Standardna črpalka za hladilno tekočino: 6 bar / 60 l/min
• Kapaciteta rezervoarja za hladilno tekočino: 510 l
• Oljno hlajenje za oba vretena, vse integrirane X/Y motorje ter oba gnana orodna motorja
• Toplotna kompenzacija z regulirano temperaturo olja
• CNC krmiljenje
• Fanuc 31i-T Plus z iHMI, 15-palčni zaslon na dotik
• Manual Guide i – dialogno programiranje
• Ethernet in USB povezljivost
• Oddaljeno vzdrževanje
• Pripravljeno za industrijo 4.0
• 14 krmiljenih osi: X1, X2, X3; Y1, Y2; Z1, Z2, Z3; T1, T2; M1, M2; C1, C2
• Sočasno krmiljenje 4 osi na kanal
• Funkcije: toga rezba, poligonsko struženje, cilindrična interpolacija, interpolacija v polarnih koordinatah, odvalno rezkanje zobnikov in power-skiving
• Ključne prodajne prednosti
• Dvojno vreteno + dva Y-osna revolverja
• Možnost sočasne 4-orodne obdelave
• Popolnoma integrirana motorna arhitektura (brez jermenov)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.382 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

CNC rezkalno-stružni stroj CMZ TTL-66-66-T1Y-T2Y

Thurmaston

1.368 km

CNC rezkalno-stružni stroj
CMZTTL-66-66-T1Y-T2Y

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Največji premer obdelovanca pri struženju: 220 mm, razdalja med centri: 800 mm, največja premera obdelovanca nad ležiščem: 240 mm, hitrost vretena: 4.000 vrt/min, hitrost pri rezanju: 12.000 vrt/min, hitrost pomožnega vretena: 4.000 vrt/min, premer vretena glavne osi: 66 mm, premer vretena pomožne osi: 66 mm, 2 x 12-postajni vrtljaki, moč vretena: 35 kW, Todoz D Eupopfx Aiqec gib osi Y: +/– 45 mm, odstranjevalnik stružnic, hladilno sredstvo, krmilnik Fanuc 31i.

Poglej podrobnosti

Mali oglas

DOOSAN Puma 2600 SY II DOOSAN Puma 2600 SY II

Nemčija

653 km

DOOSAN Puma 2600 SY II
DOOSANPuma 2600 SY II

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 18.845 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 53 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 33.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: 828D, število osi: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. The machine is ideal for complex machining tasks, ensuring robust performance and durability. If you are looking for high-quality turning capabilities, you should consider the DOOSAN Puma 2600 SY II that we have for sale. Contact us for further information. Todpfxjyr R A Es Aiqjc Additional Equipment • Mekiload gantry loader • Renishaw Equator • Renishaw Equator • The machine comes with a rotary indexing magazine • The machine is equipped with a portal robot Advantages of the Machine Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm • Main spindle torque: 719 Nm • Spindle nose (main spindle): A2-8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW • Sub spindle torque: 220 Nm • Spindle nose (sub): A2-5 • Number of stations: 24 (12 driven) Additional Information Machine is still under power

Poglej podrobnosti

Dražba

CNC stružnica CMZ TTL-66-66-T1Y-T2Y / FANUC 31iPLUS

Centre-Val de Loire

1.050 km

CNC stružnica
CMZTTL-66-66-T1Y-T2Y / FANUC 31iPLUS

Podrobnosti

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, premer struženja: 220 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 240 mm, pomik osi Y: 90 mm, pomik po osi Z: 580 mm, No reserve price – guaranteed sale to the highest bidder! The machine’s original price was €342,000! Due to enquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. passage / max. bar capacity: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance / distance between centers: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube diameter: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Sub spindle / counter spindle Max. speed: 4,000 rpm Outer diameter of front bearing: 170 mm Inner diameter of front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle bore: 72.5 mm Draw tube diameter: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / counter point Morse taper: MT3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / tool carrier Number of stations: 24 Tool section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of live stations: 12 Max. speed: 12,000 rpm Max. power / S1: 14 / 10 kW Max torque / S1: 42 / 32 Nm Liquids / tanks / supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Tjdpsy Ukhhsfx Aiqsc Optional voltage as per table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged belt-type chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic workpiece pick-off Workpiece pick-off device with pneumatic opening and closing function for capturing ejected parts Pneumatic parts ejector for sub spindle with 100 mm stroke, adjustable stroke and end position sensor Unimag interface for bar feeder

Poglej podrobnosti

Mali oglas

CNC center za struženje in rezkanje CMZ TTL - 66 - 66 - T1Y - T2Y

Idstein

675 km

CNC center za struženje in rezkanje
CMZTTL - 66 - 66 - T1Y - T2Y

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle Tedjxmhdnepfx Aiqec - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Poglej podrobnosti

Mali oglas

Plinska turbina na zemeljski plin Solar Taurus 65

La Muela

1.382 km

Plinska turbina na zemeljski plin
SolarTaurus 65

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 6.300 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, gorivo: gospodinjski plin H, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Turbina de gas Solar Taurus 65 Solonox (6,3 MWe), lista para entregar. Descripción del paquete: Taurus 65 8401S (6,3 MWe ISO), generador Solar RGB & Leroy Somer 6,3 kV Año de fabricación: Paquete 2011; la turbina de gas y la caja de engranajes fueron sustituidas por unidades nuevas en 2022 Arranques: 14 arranques de motor / 399 arranques de paquete Horas de funcionamiento (turbina de gas y caja de engranajes): 2.423 horas Ubicación: España – la unidad se encuentra almacenada en nuestras instalaciones cubiertas y climatizadas. El grupo electrógeno está disponible actualmente en nuestro almacén en Zaragoza, España. No dude en visitarnos en cualquier momento. Alcance del suministro: Paquete principal en contenedor, incluyendo: - Turbina de gas generadora SOLONOX Taurus 65 (T65) – 2.423 horas de funcionamiento - Alternador de 6.300 V - Cuadros de control - Módulo de detección de incendios - Tren de gas - Filtro de entrada de aire - Conducto de salida de aire - Enfriador de aceite - Compresor de gas - 2 depósitos de almacenamiento de gas - Enfriador para compresor de gas Sistema de control: Tjdpfxsytpbio Aiqsc - Sistema de control TTS4 integrado en bancada (basado en Siemens S7) Documentos disponibles: - Informe oficial de inspección boroscópica realizado por Solar tras la parada - Informe de mantenimiento del alternador - Certificado oficial de Solar confirmando la sustitución de turbina de gas y caja de engranajes por unidades nuevas en 2022 - Hoja técnica oficial del paquete completo Información adicional: - Última generación de energía: finales de 2023 - Preservación: unidad almacenada en edificio cubierto y climatizado - Plazo de entrega: inmediato

Poglej podrobnosti

Mali oglas

Avtomatska stružnica za palice TORNOS Deco 13a

Bienne

599 km

Avtomatska stružnica za palice
TORNOSDeco 13a

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version Tsdpfxew T Tcwo Aiqjc 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Poglej podrobnosti

Mali oglas

CNC stružno-rezkalni center Mazak QTN 250-II MSY

Thurmaston

1.368 km

CNC stružno-rezkalni center
MazakQTN 250-II MSY

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2012, največji premer obdelave 380 mm, Todpfx Aezaz Uzeiqec največja dolžina obdelave 508 mm, premer palice 74 mm, hitrost vretena 4.000 o/min, moč vretena 18,5 kW, hitrost rezkanja 4.500 o/min, moč rezkanja 10 kW, hitrost sekundarnega vretena 6.000 o/min, moč sekundarnega vretena 5,5 kW, Y-os -51/+51 mm, 12-pozicijski revolver, Mazatrol Matrix Nexus krmilje, transporter za odrezke, zbiralnik kosov, nastavitvena naprava za orodja, 3-čeljustni vpenjalec in podajalnik palic.

Poglej podrobnosti

Mali oglas

Nemčija

640 km

CNC stružnica
CMZTA-15-YS-640+GL20

Pokliči

Stanje: rabljeno, Leto izdelave: 2023, Swing diameter 120 mm Turning length 640 mm Control Fanuc 32iT Total power requirement 45 kW Machine weight approx. 8.5 t CNC lathe with 4-axis robot arm CMZ TA-15-YS-640+GL20 Year of manufacture 2023 Fanuc 32iT control Tjdpfsy Nfdmex Aiqjc Y-axis: 120 mm Z-axis: 640 mm Total power-on hours: 8,122 h Operating / Spindle hours: 4,834 h Total machining time: 3,127 h Main spindle: 14/8 kW, 4,500 rpm, spindle mount: A2-6, 52 mm bar capacity Sub spindle: 14/8 kW, 4,500 rpm, spindle mount: A2-6, 52 mm bar capacity Equipment & Options Servo-controlled double swivel gripper 2x180°, tool life monitoring TLM, tool turret with 15 positions with NT-55, live tooling, rigid tapping, 70 bar coolant system, infrared probe, special gantry enclosure, special software for multi-palletizing, LNS chip conveyor, mist extraction with HEPA, Renishaw probe, tool presetting device, GL20 gantry loader with pallet magazine, custom clamping solution FN Niederhauser, test part chute, mechanical air cleaner TEBARON TEB/EH 1 EC with EC blower

Poglej podrobnosti

Mali oglas

Bremen

890 km

CNC stružnica
MAZAKQT 250 MSY x 1000

Pokliči

Stanje: rabljeno, Leto izdelave: 2023, Premer obdelovanca 380 mm Dolžina obdelovanca 1000 mm Nadzor Mazatrol SmoothG maks. premer obdelovanca nad strojno posteljo 695 mm standardni premer obdelovanca 276 mm premer palice maks. 80 mm os X 234 mm hitra premika osi X 30 m/min os Y 100 mm hitra premika osi Y 21 m/min os Z 1090 mm hitra premika osi Z 33 m/min Tjdpfszzd Rtjx Aiqec os W 1050 mm hitra premika osi W 30 m/min hitrost vrtenja 35 - 4000 vrt/min nos vretena A2-8 premer vretena 91 mm moč motorja (nazivna moč pri 30 minutah delovanja) 26/22 maks. navor 465 (15 % ED) Nm hitrost vrtenja 35 - 6000 vrt/min nos vretena A2-5 moč (25 % ED) 11 maks. navor 90 (15 % ED) Nm hitrost vrtenja vretena za rezanje (pogonjena orodja) 5000 vrt/min navor na vretenu za rezanje maks.: 47 Nm pogonska moč - vreteno za rezanje 5,5 (40 % ED) kW moč vretena za rezanje (neprekinjeno delovanje) 3,7 kW število položajev za orodja 12 (pogonjenih) presek orodja (zunanji) 25 mm² premer vrtalne palice 40 mm premer vrtalnika 20 mm premer rezkalnika 20 mm premer navojnega vrtalnika M20 x 2,5 rezervoar za hladilno tekočino 270 l premer vpenjalne glave - glavno vreteno 10 '' premer vpenjalne glave - nasprotno vreteno 8 '' skupna potrebna moč 37 kW teža stroja pribl. 6,6 t potreben prostor pribl. 3,6 x 2 x 1,9 m stroj v standardni izvedbi, vključno z naslednjo dodatno opremo: - sistem vpihovanja zraka skozi glavo - samodejno odpiranje/zapiranje vrat operaterja - sistem vpihovanja zraka na vpenjalno glavo glavnega vretena - transporter za odrezke - zmogljiv sistem za hlajenje 15 bar - vmesnik za robota (Advance/Ethernet/IP) - natančnost vhoda za os C nasprotnega vretena (kontura/indeks) 0,0001° - gumbi na nadzorni plošči - funkcija pritrdilnika na 2. vretenu - signalna luč (3-barvna LED), pravokotna - priprava za odsesavanje oljnih meglic, samo mehanska prirobnica 98 mm - sistem za odsesavanje Absolent 10C - priprava za podajanje palic - sistem za nadzor preobremenitve - vrtalni cikel z odvisnostjo od navora pri zlomu strune - funkcija graviranja - funkcija ponovnega rezanja navojev - vse dimenzije, teže in moči so navedene orientacijsko - - rabljen stroj brez garancije -

Poglej podrobnosti

Mali oglas

Ravnalna stiskalnica Hidrobrasil Portalrichtpresse

Gelsenkirchen

835 km

Ravnalna stiskalnica
HidrobrasilPortalrichtpresse

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, stiskalna sila: 400 t, Portal Gantry Straightening Press – Manufacturer: Hidrobrasil – 400 t Gantry Press – Table size 6,000 × 3,000 mm For sale is a powerful gantry straightening press from Hidrobrasil with a pressing force of 400 t. The machine features a generous table surface of 6,000 × 3,000 mm, a movable gantry bridge as well as a laterally traversable cylinder, making it ideal for large-format straightening, assembly, and heavy-duty processing applications. ==== Technical Data & Information: Hidrobrasil Gantry Straightening Press – 400 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry Press / Double-column Press - Pressing Force: 400 t (4,000 kN) - Machine weight: approx. 52 t - Dimensions (L × W × H): 6,000 × 5,000 × 4,500 mm ==== Working Area - Table size: 6,000 × 3,000 mm - Open height: 1,500 mm - Stroke: 1,500 mm - Table height: approx. 900 mm ==== Construction & Features - Movable bridge via racks and pinions with two geared motors - Cylinder laterally movable via rack and pinion - Table in heavy-duty grid design - T-slots available per customer specification - Induction-hardened cylinder - Machine body double-painted / powder-coated - Lubrication via grease nipples - Operation via swiveling arm on the bridge - Pressure adjustment via monitor (60 – 400 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tear-out force: 600 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: 2 – 3 s (steel on steel) ==== Speeds - Pressing speed: up to 17 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 60 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 150 l/min - Working pressure: max. 280 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor output: 30 kW (IE3) - Total connected load: approx. 35 kW ==== Additional Data - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,500 mm ===== Todjhyc Nwepfx Aiqsc For straightening work, large component processing, heavy-duty assembly, metal forming, steel construction, tool making, maintenance, special applications. Gantry press, straightening press, double-column press, large press, hydraulic press, heavy-duty press, die spotting press, tryout press, tool try out press Looking for a hydraulic press tailored to your specific requirements? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply fully with the national Brazilian safety directive NR 12, which builds upon these standards. Our core strength lies in special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. The hydraulics on our presses predominantly feature components from leading European manufacturers.

Poglej podrobnosti

Oglašujte tukaj