Klimatska omara 138 lit

CLIMATS EXCAL 1413-HA -40 bis 180°C

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber volume: 34 liters Feedthroughs included in standard configuration: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance Data for Temperature Testing: Temperature range: -60 to +150 °C Temperature variation in stabilized state (per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Ffodpfxjtr Dins Abvow Maximum heat compensation: 550 W Performance Data for Climate Testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (in stabilized state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.h. Operating Data: Test chamber lighting: Halogen bulb 12V, 20W Nominal voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Nominal power: 2.5 kW Nominal current: 11 A Required customer-side fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat emission to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors, all details are non-binding!) If you have any further questions, we are happy to answer your calls.

Stanje: novo, Leto izdelave: 2025, The skyCUBE M laser processing center – the new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser – available immediately Mclass = Processing area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunction laser engraving and cutting machine – easy laser processing, high precision – laser engraving and cutting with high speed and quality. Our new and best multifunctional system impresses even the most experienced user with its innovative design. This CO2 laser/fiber laser demonstrates outstanding performance in all industrial applications as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser. With an optional laser power of up to 1000W (1kW), the CO2 laser device/fiber laser system is extremely versatile for use in your production environment. skyCUBE laser units comply with all requirements of Class 1 according to DIN EN 60825-1, offering you maximum safety. Depending on the selected and installed laser power, this CO2 laser/fiber laser is perfectly suited for cutting and engraving a wide range of materials such as metals, acrylic glass, solid wood and wood composites, wood-based materials, paper, cardboard, various plastics and foams, textiles, and much more. The excellent engineering – 100% produced in Plauen – guarantees users from metal fabrication to laser source a high working accuracy with consistently high quality. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology ensures clean, ultra-sharp cutting edges and precise laser engravings. The ergonomic design featuring a pull-out worktable simplifies loading the machine. A drawer in the lower section collects processed material efficiently. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A straightforward, practical user interface adapted to the Windows standard enables fast and effective operation. High system stability, professional monitoring, efficient machine operation and control, as well as compatibility with conventional file formats characterise the software. Data output is organised by layers – each layer defined separately, including sequencing and process type. Parameters such as laser power and processing speed are automatically stored for each layer and can be retrieved from a materials database at any time. Laser projects are transmitted to the skyCUBE M processing center via a computer connected through LAN/USB interface. Projects can be executed repeatedly, even without the PC being on. A modern touch control panel provides access to all system information and functions. Fedpfo Sfansx Abvofw skyCUBE M Laser Processing Center at a glance: - German industrial-standard welded steel construction for secure and vibration-free mounting of laser components and axis systems, equipped with mobile industrial leveling feet - 8" touchscreen display – better overview, more control, enhanced communication with the skyCUBE M laser processing center - Redundant safety system – Class 1 laser

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, CNC BAYKAL Hybrid-Abkantpressen vereinen alle Vorteile von hydraulischen und vollelektrischen Abkantpressen in einer Maschine. Wenn Sie eine Abkantpresse suchen, die schnell, präzise und energieeffizient arbeitet, ist BAYKAL die richtige Wahl. Fedpjrq D Nijfx Abvofw Die CNC BAYKAL Hybrid-Abkantpressen ermöglichen signifikante Energieeinsparungen, reduzieren den Kraftstoffverbrauch, steigern die Biegeleistung, minimieren das Risiko von Ölleckagen, senken die Installationskosten, verlängern die Lebensdauer der Verschleißteile, erhöhen die Biegenauigkeit, verringern das Betriebsgeräusch und verbessern das Arbeitsumfeld. Das CNC BAYKAL Hybrid-Abkantpressensystem ist mit einem individuellen elektrohydraulischen Servoantrieb und Servopumpen ausgestattet, die getrennt die linke und rechte Zylinderseite steuern. Der Servomotor regelt den Förderstrom der Ölpumpe entsprechend der Programmvorgabe und steuert so die Geschwindigkeit sowie die Positionsgenauigkeit des Pressbalkens; während des gesamten Prozesses tritt dabei kein Drosselphänomen auf. Dadurch steht die von der Ölpumpe erzeugte Energie vollständig den beiden Hydraulikzylindern zur Verfügung. Diese Steuerungsmethode verursacht keinerlei Energieverluste und die Energieeinsparungswirkung ist besonders deutlich. Das System sorgt dafür, dass die Hydraulik nur bei Betätigung des Fußpedals arbeitet – die Pumpe läuft nicht dauerhaft, wie bei herkömmlichen Hydrauliksystemen. Dies führt zu einem geringeren Energieverbrauch, schnelleren Zykluszeiten und höchster Präzision im Vergleich zu Standard-Hydraulikmaschinen. Der Förderstrom und der Druck der Y1- und Y2-Hydraulikzylinder werden jeweils durch zwei Servobidirektional-Pumpensysteme geregelt, wobei das Öl des oberen Zylinders direkt durch die Pumpe in den unteren Zylinderraum geleitet wird, um das Anheben des Pressbalkens zu realisieren. Durch die Umkehrung der Drehrichtung der Pumpe wird das Öl aus dem unteren Zylinderraum gepumpt, um die Abwärtsbewegung und das Biegen mit dem Oberwerkzeug zu ermöglichen. Einsatzbereich von 100 bis 1.250 Tonnen – die Synchronisation der linken und rechten Seite des Oberbalkens bei den CNC BAYKAL Hybrid-Abkantpressen wird jeweils separat durch zwei Servobidirektional-Pumpensysteme kontrolliert.

Stanje: novo, Leto izdelave: 2025, 3-segment folding machine with foot operation EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Folding machine with foot operation, complete - Numerous bending options thanks to segment inserts in the upper, lower, and bending beams Boxes and special profiles with opposing bends can be fabricated with ease on this model - Our folding machine is a well-dimensioned, fully-welded construction with foot-operated upper beam positioning. This significantly streamlines and speeds up workflow, as both hands remain free for material insertion and alignment. - The easily and quickly adjustable bending angle stop ensures accurate and highly repeatable production of the required bending angle, even in large series production - Upper beam, lower beam, and bending beam all fully segmented (piano-type) - Segments are adjustable and removable - Precision-ground bending segments manufactured from extremely tough and hard special alloy steel - Bending beam is effortless to operate, equipped with heavy-duty pressure spring/spring damper - Heavy-duty and robust design for decades of continuous operation - Convenient opening and closing of the upper beam Technical data: - Max. working width: 1,250 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 265 kg - Segment widths: 30, 40, 50, 60, 70 and 100 mm - All three beams equipped with segmented tooling (fully segmented) - Adjustable stop for preset bending angles - Angle scale Ffsdpfxjcudl Nj Abvow - Material clearance: 100 mm Price: €5,400 Swivel castors included Delivery time: Every week on Monday/Tuesday Cash on delivery Delivery charge: €180 This type of folding bench is also available in a length of 1,400 mm. We look forward to your enquiry!

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, številka stroja/vozila: 1000x40, delovna širina: 1.000 mm, skupna masa: 1.850 kg, skupna dolžina: 2.300 mm, skupna širina: 1.950 mm, stiskalna sila: 40 t, delovno območje: 1.000 mm, Oprema: varnostna svetlobna zapora, Uporabljena, kot nova Ermaksan CNC upogibna stiskalnica (pressbrake), 1 meter x 40 ton, 3-osna, naprodaj Fodpfx Asvy Ewisbvjfw Popolnoma opremljena z nadzorno enoto Cybelec Cybtouch 12 Leto izdelave: 2020 Tehnične specifikacije: - Največja dolžina upogibanja: 1 meter / 1000 mm - Razdalja med stebri: 800 mm - Največja stiskalna sila: 40 ton - Hod prečke: 100 mm - Širina mize: 90 mm Dimenzije (približno): - Dolžina: 2300 mm - Širina: 1950 mm - Višina: 1860 mm - Teža: 1850 kg Stroj je vključno s spodnjim multi-V orodjem in segmentiranim zgornjim orodjem.

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Fedpfxsw R Rano Abvofw Screen size: 20 mm Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Stanje: zelo dobro (rabljeno), CTS Type: C-40/60 Fjdpfx Aou Hlb Eebvofw CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40°C to +180°C Humidity Range: 10% to 98% relative humidity +10°C to +90°C within the temperature range +5°C to +89.5°C within the dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Enclosure: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Nominal Current: 13 A Important Information for Buyers – For your security: The following services are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful checks, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2023, obratovalne ure: 2 h, stanje: novo, Model 2023 • Professional XRAYmark fiber laser source with 20-watt power and 400 kHz • “PreciseView” scanner unit with camera for live imaging • T-slot or threaded hole plate for easy attachment of the marking unit (200 x 200 mm) • Viewing window with certified laser safety glass • Scanning area approx. 100 x 100 mm • Manual height adjustment • Enclosure with manual lift door for simple and safe marking EZCAD III Software • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be transferred to the software via the TCP protocol. This allows for easy integration of external components, such as third-party camera position detection, etc. • Industry 4.0: with the TCP/IP protocol, the machine status can be processed at any time. • Inputs and outputs for direct interaction with external devices • New look and feel. A refreshed design enables even clearer and more comfortable operation. • 3D preview for rotary axis processing • Performance increase of up to 50% thanks to 64-bit technology • Improved stability • Optionally control up to 4 axes WITHOUT switching via PLUGins. • Optional deep engraving (slicer software including Z-axis control) • New algorithms for increased engraving speed during hatching • Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position verification Cuhn227e • LED illumination of the marking area • Connection option for external extraction • Start button and emergency stop (E-Stop) on the enclosure • PC software for Windows operating system Fodpfx Aod Ibu Njbvofw • USB cable for connecting to a computer • Operating manual and user software in German Among others, we offer the following options: =ᐳ IPG laser source / fiber laser source in various power ratings =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for loading, conveyor belts and much more! =ᐳ 3D marking and engraving capability =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized stage =ᐳ Interlock system for marking WITHOUT a safety enclosure, but only with PPE (personal protective equipment) for bulky parts Includes training in our Schweinfurt Training Center! Our engraving lasers are manufactured on-site at our Schweinfurt facility! Therefore, custom requests are always possible! =ᐳ Made in Schweinfurt! Images may include optional features! Laser engraving machine, laser marker, laser marking, laser lettering, laser engraving, laser engraver, laser marking system, laser marking machine, laser engraving system, laser labeling system, marking laser. Laser engraving machine, laser marker, laser marking, laser lettering, laser engraving, laser engraver, laser marking system, etc. #Laser marking system for marking a wide range of materials. The fiber laser source achieves extremely clean and high-contrast #engravings. This #laser engraving system is economical and easy to operate.

Stanje: zelo dobro (rabljeno), Weiss Type: WK-340/70 air-cooled Test chamber volume approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Key data for temperature tests: Temperature range: -70 to +180 °C Temperature fluctuation over time: ±0.1 to ±0.5 K Temperature fluctuation spatially: ±0.5 to ±2.0 K Temperature change rate – Heating: 3 K/min Temperature change rate – Cooling: 2 K/min Key data for climate tests: Fjdpfx Asv Uap Nsbvofw Temperature range: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature fluctuation over time: ±0.1 to ±0.3 K, spatially: ±0.5 to ±1 K Humidity fluctuation in the center of the usable chamber: ±1 to ±3% r.h. Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety as a buyer, the following information! The following measures are carried out on the chambers we offer prior to delivery: 1. Function check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information are excepted!) If you have any further questions, we will gladly answer them by phone.

Stanje: dober (rabljeno), Weiss Model: WK1-1000/70 Weiss Climate Test Chamber, Water-cooled (Refrigerant converted to R-452A) Control Unit: Touch Panel All control and operation commands can be initiated at the touch panel by simply touching the function symbols. Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. Measurement cables and test devices can be routed into the test chamber through these openings. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Internal Dimensions: Chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Specifications for Temperature Tests: Minimum temperature: –70 °C Maximum temperature: +180 °C Temperature deviation (over time): ±0.1 to ±0.5 K Temperature uniformity (spatial): ±0.5 to ±2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Specifications for Climate Tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation (over time): ±0.1 to ±0.3 K Temperature uniformity (spatial): ±0.5 to ±1 K Humidity deviation (over time): ±1 to ±3% RH Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Fodpfx Abjrvx Ezsvsfw Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change; errors and omissions excepted!) We are happy to answer further questions by phone.