Pick-up kombi

CITROEN Jumper EURO5 MAXI 4,20m

Stanje: dober (rabljeno), Leto izdelave: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically assisted support rolls Fjdpsvd Dftjfx Afljft Intelligent software: - Ellipse program - U-bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis diameter: Ø 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Dimensions (approximate): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are made. We recommend verifying all important details.

Stanje: rabljeno, prevoženi kilometri: 64.129 km, moč: 120 kW (163,15 KM), prva registracija: 02/2017, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: srebrn, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 7.850 mm, skupna širina: 2.130 mm, skupna višina: 2.300 mm, dolžina tovornega prostora: 4.980 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2016, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Complete combination with premium Fitzel superstructure on Sprinter and trailer Equipment: * Air conditioning, driver’s seat with heated suspension, * Double passenger seat, * 7G-Tronic Plus automatic transmission with cruise control, * Tow hitch (3,500 kg) with 13-pin trailer socket, * Fuel tank: main tank 100 L, * Rear wall trim, * Heat-insulating glazing, Fodsqu Hztopfx Afloft * Double passenger seat, Technology/Electrics/Comfort: * Becker MAP Pilot navigation system, * Outside temperature display, * Roof control unit with reading spots for driver/passenger, * Preparation for digital tachograph, * Electrically adjustable and heated exterior mirrors (both sides), * Additional reinforced battery, * Split-charge relay for auxiliary battery, Safety/Environment: * Bi-xenon headlights with cornering lights, * Driver’s airbag, * Brake assist, * Braking system with ABS+ASR, * Hill-start assist, * Suspension for application B: reinforced front and rear stabilizers, reinforced shock absorbers, reinforced front axle, * Low emissions according to Euro 6 emissions standard, Other: * Wheelbase 4,325 mm, * Engine 2.1 L – 120 kW CDI CAT, * Payload 1,460 kg as per registration certificate * Permissible total weight 3.5 t Incl. matching Fitzel 3-axle vehicle transport trailer, Fitzel 35-23/83T, * Loading area 8,280 mm x 2,300 mm, * Loading height approx. 680 mm, * Overrun braked, * 100 km/h approval, * Drive-over ramps, * Knott axles, * Tire size 195/55R10C, * Payload 2,610 kg, * Permissible total weight 3,500 kg Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim near Bremer Kreuz. NutzfahrzeugZentrum Behnke consistently offers around 200 vehicles, ranging from vans and commercial vehicles to construction machinery! We continuously offer attractive financing options with special conditions. If interested, we will gladly provide you with a tailored quotation! Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical and data transmission errors. Listed equipment must be checked separately if necessary. Subject to error and prior sale.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Ffsdpfeg U Utvjx Afljt Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: dober (rabljeno), Leto izdelave: 2009, Manufacturer: BAILEIGH Ffedpfewpkwfsx Aflot Model: R-H 120 Control: Telemechanique Year of manufacture: 2009 Adjustable arm 330 mm Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital readout system for side roll positioning Horizontal & vertical operation possible Specifications Metric / US Standard Horizontal and Vertical operation Axis diameter: 100 mm Number of rolls: 3 Horizontal: Yes Vertical: Yes Flat bar capacity: 100 x 240 x 1600 mm Pipe capacity: 139 x 4 x 3000 Ø x mm T-profile capacity: 100 x 100 x 1000 mm Working speed: 0 - 5500 mm/min Adjustment range of side roll: 200 mm Top roll pressing force: 200 bar Side support: Yes, 330 mm stroke Dimensions (approximate) Length: 1800 mm Width: 1600 mm Height: 2000 mm Weight: 2300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details. Share on

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding Turntable KT 300 Fedsc Ug Tlspfx Afleft Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: stepless via geared motor with hand crank, 0 - 90° Speed: 0.3 to 2.5 rpm Includes foot pedal remote control Optional extra: Quick-release chuck Diameter 300 mm, €450

Stanje: rabljeno, Kompleti valjev za profilno upogibalko, 3-valjna obročna upogibalka HERKULES WETZLAR Valji so primerni za profilno upogibalko HERKULES WETZLAR tip BO 238 N Premer osi: 60 mm z 18 mm utornico 2 kosa valjev komplet št. 1, premer valja = 110 mm, širina valja = 180 mm 2 kosa valjev komplet št. 2, premer valja = 160 mm, širina valja = 40 mm 3 kosi valjev komplet št. 3, premer valja = 150 mm, za premer cevi Ø 33 mm, širina valja 87 / 115 mm - Komplet št. 3 z adapter obročem iz Ø 93 na Ø 60 mm brez utornice Ffjdpfx Aeglaq Isflst Stroj je imel 2 gnana valja Teža vseh valjev 57 kg dobro stanje

Stanje: rabljeno, prevoženi kilometri: 314.874 km, moč: 120 kW (163,15 KM), prva registracija: 11/2011, vrsta goriva: dizel, lastna masa: 2.356 kg, največja dovoljena obremenitev: 1.144 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, medosna razdalja: 4.325 mm, naslednji pregled (TÜV): 01/2026, zavore: drugo, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: zrak, število sedežev: 7, dolžina tovornega prostora: 3.380 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, filter saj, kabina, nadzor oprijema, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, zapora diferenciala, * German vehicle * 1 owner * Condition, see photos * Long flatbed body * Double cab with 7 seats * 6-speed manual transmission * Rear doors with tilt windows * Trailer coupling * Towing capacity: 3,500 kg Ffsdpfx Afowplm Ielst * Flatbed body with aluminium drop sides * Body dimensions: 3,380 x 2,000 x 400 mm * Anti-slip phenolic plywood floor * DIN lashing eyes * High front panel * Rear window * Electric windows * Lane assist * Electric mirrors * Radio USB * Central locking with remote control * ABS/ASR/ESP * Leaf spring suspension * Gross vehicle weight: 3,500 kg * Kerb weight: 2,356 kg * Payload: 1,144 kg If a new technical inspection (TÜV) is required, we are happy to provide a quote through our partner workshops. Our offer generally does NOT include a new technical inspection (TÜV), no new DGUV, no new safety inspection (SP), and no new accident prevention regulations inspection (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Fodpfx Afouz If Njleft Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, 3-Roller Bending Machine Fedpfx Asuluhwsfleft Brand: RAGACHE Model: New Tube CP70 Driving rollers diameter: 232 mm Capacity for standard steel rectangular section: 60.0 mm Capacity for standard steel round section: 40.0 mm Capacity for standard steel L-section: 70.0 mm Capacity for standard steel U-section: 120.0 mm Capacity for standard steel T-section: 60.0 mm Capacity for standard steel I-section: 120.0 mm

Leto izdelave: 1980, Stanje: dober (rabljeno), številka stroja/vozila: 3253-80, Offer 22045 Technical Specifications (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Through-hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram area: 240 x 150 mm - Ram bore diameter: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Stroke rate: 130 strokes/min - Hydraulically operated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW Fsdpfx Asktg Dhoflsft - Space requirement approx.: W 1000 x H 1800 x D 1100 mm - Weight approx.: 1300 kg