Avtomatska stružnica

CITIZEN L32 VII

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Technical Details Maximum machining diameter: 32 mm Spindle bore: 36 mm Turning length: 320 mm Control system: MITSUBISHI MELDAS 635LC Travel max. (X1): 108 mm Travel max. (Y1): 275 mm Travel max. (Z1): 325 mm Travel max. (X3): 238 mm Travel max. (Z3): 410 mm Main spindle speed range: 200 - 8,000 rpm C-axis: 0.001° Sub-spindle speed range: 200 - 7,000 rpm C-axis: 0.001° Rapid traverse: 20 m/min Main motor: 3.7 / 5.5 kW Sub-spindle drive power: 1.5 / 2.2 kW Machine dimensions: 2.77 x 1.24 x 1.79 m Total power requirement: kW Machine weight approx.: 2,850 kg Space requirement approx.: m Additional Information CNC Swiss-type automatic lathe Commissioned: 12/2005 The machine was operated in single-shift operation, no outstanding maintenance, in good condition. Equipment: FMB Turbo 5-42/3200C bar feeder, year 2004 High-pressure pump Various collet chucks for the main spindle Assorted collets Ksdpfox Uzcvjx Aacodh Drive unit for synchronously driven guide bushing Synchronously driven guide bushing Drive unit for transversely driven spindle on linear carrier Pick-off spindle Collet chuck for pick-off spindle Blow-out device for pick-off spindle Five fixed tool holders at the rear Workpiece removal device Coolant tank Central lubrication system Door interlock Ejector device for workpieces with through-hole Machine documentation The machine is sold without tools and extraction unit.

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: omejena funkcionalnost, prehod palice: 51 mm, skupna masa: 6.000 kg, capacità barra 51 mm - tre torrette - tre assi Y - portautensili fissi/rotanti - caricatore barre LNS Sprint 552 nuovo nel 2011 - controllo Fanuc Kodpfx Aewvvyrsacjdh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MGL203279932, premer struženja: 32 mm, Oprema: dokumentacija / priročnik, podajalnik palic, Stroj je bil uporabljen le v eni izmeni! TEHNIČNI PODATKI Največji obdelovalni premer: 32 mm VRETENA Glavno vreteno: s vpenjalno tulejo Proti-vreteno: s vpenjalno tulejo in izpihovalno napravo PODATKI O STROJU Obratovalne ure: ocenjeno približno 25.000 – 30.000 h Ksdpfexrcpvjx Aacjdh OPREMA Podajalnik palic FMB Turbo 5-42/3200C Dokumentacija Visokotlačna hladilno-mazalna črpalka Enota za odvzem obdelovancev Različne vpenjalne tuleje Centralni mazalni sistem Izmetalec za obdelovance s prehodno izvrtino

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 320 mm, največja hitrost vretena: 8.000 obr/min, premer struženja: 32 mm, izvrtina vretena: 39 mm, model krmilnika: Mitsubishi Meldas, TEHNIČNI PODATKI Maks. premer obdelave: 32 mm Maks. dolžina obdelave na en vpenjanje: 320 mm Glavna vretena hitrost: 8.000 min⁻¹ Premer vretena: 39 mm Proti vreteno (zadnje vreteno): 32 mm Maks. čelno rezkanje/ vrtanje: 12 mm Maks. čelno rezanje navojev: M12 Kapaciteta orodij: 30 orodij Število osi: 7 PODROBNOSTI O STROJU Krmilje: Mitsubishi Meldas Priključna moč: 10 kW Dimenzije in teža Dimenzije (D x Š): 2.800 mm × 1.240 mm Teža stroja: 2.800–2.900 kg OPREMA Visokotlačni sistem Protipožarna naprava Transporter za ostružke Lovilec delov Kdedpfjxxlkpox Aacjh Transportni trak za dele 4 pogonska držala orodja Standardna držala orodja

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Kdedpfxsfg E Hpj Aaceh The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Splošne informacije Tip: CNC švicarski avtomatski stružnica Leto zagona: 12/2005 Stanje: Dobro, brez vzdrževalnih zaostankov, obratovan v enojni izmeni. Dokumentacija: Popolna dokumentacija stroja je priložena. Zmogljivosti Največji premer obdelave: 32 mm Avtomatizacija in vretena Podajalnik palic: FMB Turbo 5-42/3200C Glavno vreteno: S držalom za vpenjalno pušo. Proti-vreteno: S držalom za vpenjalno pušo in izpihovalno napravo. Dodatna priložena oprema - Visokotlačna črpalka hladilne tekočine - Enota za odstranjevanje obdelovancev - Različni vpenjalni tulci - Centralni sistem mazanja - Izmetalec za obdelovance s prebojem Izključitve - Stroj se prodaja brez orodij in brez sesalne enote. Kjdpfoxgh Ersx Aacedh

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer struženja: 32 mm, vrsta vhodnega toka: trifazni, prehod palice: 32 mm, Premer palice (maks.): 32 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stružnica Citizen Cincom L32VII, letnik 2007. Podajalnik palic LNS Hydrobar Express 332 Transporter za odrezke LNS. Upravljanje Mitsubishi Meldas. Maksimalni premer obdelave: 32 mm. V kompletu za podajalnik je več vodilnih kanalov. Kdodpst Hu Awefx Aacoh Stroj je na voljo takoj.

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 7/4986, Total pressing force: 250 - 400 t Hydraulic ring serration force (lower table): 20 - 200 t Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring serration stroke: 40 mm Counterholder stroke: 40 mm Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min⁻¹ Kjdpouqdxisfx Aacsdh Rapid approach speed: 120 mm/s Rapid return speed: 135 mm/s Working speed: 5 - 50 mm/s Total tool weight: 2400 kg Standard equipment Automation Roll-off trough with straightening machine

Stanje: rabljeno, Leto izdelave: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SIN 840D Powerline Ksdpfx Asw Df A Soacodh Spindle speeds - stepless: 1 - 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z-axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z-axis: 10,000 N Rapid traverse B-axis: 11.20 rpm Pallet size: 800 x 630 mm Table load: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 - 500 rpm Tool magazine: Chain magazine, 120 positions Tool diameter: 100 mm Tool diameter with 2 empty pockets: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10.00 kg Total power requirement: 60.00 kW Machine weight approx.: 13.00 t Space requirement approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, mode 4 operation, extraction system.

Stanje: rabljeno, Article: Clamping heads Ksdjn H Nzujpfx Aacjdh Brand: Various manufacturers For multi-spindle automatic lathes, used or new Please contact us for further information and pictures via email (at) or *