Rezkalni center

Chiron FZ 12 KW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 550 mm, pomik osi Y: 320 mm, pomik po osi Z: 360 mm, obremenitev mize: 500 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 5.000 g, število osi: 3, This 3-axis vertical machining center CHIRON FZ 12 KW was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and rapid traverse rates of up to 60 m/min on the Z-axis. The machine is equipped with an automatic tool changer with 24 positions and can support a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Machine Benefits Technical Advantages • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12,000 rpm in 0.6 seconds • Clamping area: 820 x 440 mm² • Drilling capacity in St 60: Ø 16 mm • Tapping: M16 • Milling capacity in St 60: 80 cm³/min • Acceleration: X & Y axis 0.7 g, Z axis 1.0 g Additional Information Movement Axis range and speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Permitted load moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Credpsx Nr I Eefx Apleb Maximum speed J1: 195°/s J2: 175°/s J3: 180°/s J4 and J5: 400°/s J6: 600°/s Permitted load moment J4 and J5: 7.7 Nm J6: 9.8 Nm Tools Automatic tool changer: Tool pockets: 24 Tool change time: approx. 0.9 s Chip-to-chip time: approx. 2.4 s Workpieces are fed automatically and sequentially loaded into the Chiron machining centers by two Fanuc industrial robots. After the machining process, the parts are removed. The robots then transfer the components to a transfer system, which conveys them to a downstream cleaning unit. The integrated washing line ensures reliable cleaning of the components in accordance with defined cleanliness specifications. After washing, two synchronized Fanuc robots take over the cleaned parts at the rear of the system. Depending on process requirements, the parts are either automatically palletized or further processed in a subsequent step, such as riveting. The entire system operates fully automatically.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Overhauled BRUDERER high-speed stamping press BSTA300 incl. new press control system Technical specifications: ----- Press force: 300 kN Die installation opening: 750 mm Stroke rate: 80–1,400 (depending on selected stroke) Adjustable stroke: 13, 16, 19, 25, 32, 38, 44, 47 mm Ram adjustment range: 51 mm Tool installation height: 171–239 mm (depending on selected stroke) Bolster plate: 740 x 480 mm Ram area: 630 x 360 mm Strip passage width: 206 mm Base plate opening: 710 x 160 mm Strip feed height: 50–120 mm Strip travel direction: left to right Crjdpfx Apetvnlbsljb Feed unit: servo feed Machine weight: approx. 5,150 kg Machine color: RAL 1013 pearl white Attachment color: RAL 7016 anthracite Control cabinet color: RAL 7035 light grey

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Crjdpfjrpn Dvsx Aplsb Tehnični podatki so prikazani na sliki.

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clear space between frame walls: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Slotted opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Cedjvuun Tjpfx Apljrb Space requirement: approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading/unloading and automatic operation according to CE guidelines With steplessly adjustable drive, light barrier (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic die cushion in table (20 t), automatic central lubrication, control panel with two-hand operation Clear distance between tie rods: 940 mm Lateral pass-through: 900 mm

Stanje: rabljeno, Leto izdelave: 2003, Drehdurchmesser 190 mm Drehlänge 620 mm Steuerung Fanuc Series 18i-TB Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 13,5 t Raumbedarf ca. 5350X3350x2395 m CNC Dreh- und Fräszentrum NAKAMURA TOME Super NTJ Baujahr 2003 Codpfexiy Ausx Aplorb Steuerung Fanuc Series 18i-TB - Hauptspindel muss überholt werden. - Oberer Revolver ist mit einer G42 Turbo- Luftangetriebenen Spindel 60000 U/min und Steuergerät GTR 3 nachgerüstet. Anzahl der Achsen: 9 Anzahl der Revolver: 2 Max. Drehdurchmesser: 190 mm Max. Drehlänge: 620 mm Stangendurchlass: bis zu 65 mm Umlaufdurchmesser über Bett: 190 mm Anzahl: 2 (Haupt- und Gegenspindel) Spindelnase: A2-6 Antriebsleistung: 15 kW Max. Drehzahl: 60000 U/min X-Achse: 345 mm Y-Achse: +/- 45 mm Z-Achse: 1240 mm B-Achse: +/- 91° oben voll Servogesteuert 0,001° Stangendurchlass: D 65 mm - 12-fach Revolver für angetriebene Werkzeuge - 24-fach Revolver für Drehwerkzeuge (Doppelhaltertechnik) - mit viel Zubehören - 2 x HB-Futter Hainbuch

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Crodpfx Aocxxx Rjplob Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 3.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 610 mm, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 3.900 h, Ponujamo zelo dobro ohranjen stroj Hurco VMX30 HSi z vretenom HSK-A63 in 18.000 vrt/min. Pomik po osi X: 762 mm Pomik po osi Y: 508 mm Pomik po osi Z: 610 mm Stroj ima naslednje možnosti: Notranje hlajenje 20 bar Menjalec orodij za 40 orodij Vreteno 18.000 vrt/min HSK-A63 Linearne merilne letve Cjdpfx Apox N E H Ujlorb Merilna sonda Renishaw OMP40 Orodna sonda Renishaw TS27R Programska oprema Ultimotion Programska oprema za optimizacijo menjave orodja Prosimo, upoštevajte, da primeži niso vključeni v prodajo stroja.

Stanje: rabljeno, Leto izdelave: 2008, x-travel 450 mm Csdpfowgi Drex Apljrb y-travel 400 mm z-travel 400 mm Control: Heidenhain Mill Plus V600 Machine weight approx. 7000 kg 24,000 rpm 16x HSK63A tool changer 40 bar internal coolant supply 250-litre coolant tank Chip conveyor

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Credpolz Rvlefx Aplob Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Odlično ohranjeni 5-osni brusilni stroj za orodja naprodaj zaradi neizkoriščenosti! Credpfexw Sxkox Apleb