Industrijski orbitalni kovičnik

CHIRON Werke GmbH Tuttlingen (Made in West Germany)

Type/Designation: 307-153/714-750

Serial Number: 82/293

Country of Manufacture: Made in West Germany (pre-1990)

Technical Data (estimated, for CHIRON machines of the 1970s/1980s):
Nwjdpfx Ahew T U Ubj Ueg

Machine Type: Column drill / single-station drill for metalwork

Motor Power: Usually from 1.5 kW to 3 kW (three-phase, 380 V)

Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched)

Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on version)

Spindle Taper: typically MT2 or MT3

Feed: manual or mechanical feed (some models feature automatic feed)

Weight: several hundred kilograms (approx. 300–600 kg)

Application: Serial production in industry (precise drilling of holes, light milling in metals, suited for integration into production lines).

Work Table: Cast iron, with clamping facility for workpieces

Full control panel – variable speed adjustment

2. Working Parameters of the Head (key values for riveting operations):

Pressing Force (kN) – check the nameplate on the cylinder or inside the box (typically 10–30 kN for this size)

Spindle/Slide Stroke (mm) – measure from upper to lower position

“Daylight” (working height: distance between tool tip and table at uppermost position)

Throat Depth – distance from spindle axis to column (working reach)

Max. Rivet Diameter / Working Range – specify by test results or previous use

Voltage: usually 380/400 V, 50 Hz

3. Dimensions and Logistics:

L×W×H of base/overall (cm)

Power Supply: 3×400 V, circuit breaker e.g. C16–C20 (state as per power rating)

Weight (measure with pallet truck with scales or provide estimate)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.