CNC stružnica

Chevalier FVL-1250VTC+C

Stanje: novo,

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, nosilnost: 200 kg, doseg roke: 2.400 mm, PLC Merkezi olarak, stoklarımızdaki endüstriyel robotlarımızla özel mühendislik projeleri gerçekleştirebilmekteyiz. Bu örnekte olduğu gibi, sizin ihtiyaçlarınıza yönelik projelerde size yardımcı olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme - Mermer İşleme - Abkant Makinesi Besleme ve Sac Bükme - Ve birçok farklı proje Marka: KUKA Model: KR200-3 Comp Durum: Revizyonlu, 1 yıl garantili Kwedpfsq Dpxdex Abbst Sürüm: V5.6.12 Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Taşıma Kapasitesi: 200 kg Erişim Mesafesi: 2400 mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablolama Setleri + Teach Pendant + 1 adet Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistemle Setli) + Takım Değiştirme Masası Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Sevkiyat: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm Kedpfx Asvy Ihdsbbowt T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Prodajamo to napravo. Vpenjanje ISO 50, hlajenje skozi vreteno Os X: 9.000 mm Os Y: 4.000 mm Prečni pomični stroj S 30 z nosilnostjo 30.000 kg, dimenzija 2.500 x 3.500 mm Obrati vretena 10–3.000 obr/min Plošče dimenzij 4000x2000 mm (1 kos) in 2000x2000 mm (1 kos) Heidenhain iTNC530 Kjdpfxox Auzlo Abbjwt Dva kosa kotnika, pripadajoče orodje in dodatki. Gre za popolno delovno mesto. Stroj bo sproščen iz proizvodnje konec januarja 2026.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Vertikaler CNC-Drehmaschine – 3 Achsen Marke: HYUNDAI WIA Modell: LV 800 RM Baujahr: 2019 (575 Betriebsstunden im Schnitt) Steuerung: FANUC 32iB + Manual Guide Technische Daten: Drehkapazitäten: Max. Durchlassdurchmesser: 890 mm Max. Drehdurchmesser: 800 mm Max. Drehlänge: 800 mm X-Achse (horizontal): 440 mm Z-Achse (vertikal): 800 mm C-Achse: 360.000 Positionen Hydraulisches 3-Backen-Futter: Durchmesser: 530 mm Drehzahl: 2000 U/min Hauptmotorleistung: 37/30 kW Maschinenabmessungen (B x T x H): 2000 x 2877 x 3300 mm Gewicht: 11 t Ausstattung: 12-fach Revolver C-Achse 0,001° Angetriebene Werkzeuge, Spindel 7,5 kW, 3000 U/min Werkzeug-Innenkühlung, 20 bar Renishaw Quickset Kwsdpfxsxxt Ebs Abbjt Halter für angetriebene Werkzeuge: 3 x axial, 3 x radial Drehwerkzeughalter Backensätze Manuelles 3-Backen-Futter, Durchmesser 630 mm Späneförderer

Stanje: rabljeno, Leto izdelave: 2008, x-travel 12,000 mm y-travel 1,500 mm z-travel 3,500 mm Feed rate 20,000 m/min Spindle interface DIN 69871 A50/HSK63 Spindle speed 35–6,000 rpm Table load capacity 30,000 kg Operating hours 26,658 h Control system Siemens 840 Digital Milling head: automatic 45° milling head Internal coolant supply 60 bar Coolant system JUMA+GAIN with 200 L Chip conveyor incl. Tool changer with 80 positions Total power requirement 209 kW Machine weight approx. 75 t - Automatic 45° head, 6,000 rpm with positioning accuracy 0.001°/0.001° (DIN 69871 A50) - Swiveling head (5 axes), 18,000 rpm, 23 kW, DIN 69893 HSK A63 - Direct outlet head, 6,000 rpm – DIN 69871 A50 - Extension head 500 mm, 2,000 rpm, DIN 69871 A50 - Clamping tools for turning with Capto 6 clamping systems - Automatic head changer (AHC) - AITEK ACH docking station for automatic changing of 4 heads - Rotary table with LINEAR TRANSLATION mod. ZA/B-2000 Table longitudinal traverse (B) 2,000 mm Kodpfx Aoxvdunobbswt Table rotation (B) 0.001° Table area 2,500 x 2,500 mm Max. speed 10,000 mm/min Hydrostatic system INCLUDED Table load capacity (max.) 30,000 kg - TURNING-MILLING TABLE BOST Ø 2,500 mm Chuck size Ø 2,500 mm Longitudinal travel of chuck 1,500 mm Table load capacity (max.) 25 t Spindle motor power 2 x 37 kW Max. rotation speed 200 rpm Max. milling performance 55 kW Axis (Turning – Milling) INCLUDED Linear traverse speed 15,000 mm/min - BLUM LASER MICRO A5 - Probe M&H PS 20 with DIN 69871 A50 - Probe M&H PS 20,00 with DIN 69893 HSK A63

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Technical specifications are subject to change without prior notice. Ksdov D U Ifopfx Abbswt Axis travel paths of the CERUTI 25 model: X-axis: Working travel 10,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Y-axis: Working travel 2,500 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Z-axis: Working travel 1,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. A-axis: Working travel +/- 95°. C-axis: Working travel +/- 200°. T-axis: Continuous movement. Operating speeds of the linear axes: X, Y, Z axes: 20,000 mm/min. Axis accelerations: X-axis: 1,000 mm/sec². Y, Z axes: 1,000 mm/sec². Note: Accelerations may vary depending on the installed CNC control system. Spindle: Type: ISO 40, ISO 50, electrospindle HSK A63. Power: 30 kW. Torque: 280 Nm. Maximum speed: 12,000 rpm. Installed tool holder type: HSK A63. Tool changer type S.G.M.: Number of positions: 20, 30, 74. Maximum diameter for adjacent positions: 100 mm. Maximum diameter for non-adjacent positions: 200 mm. Maximum length: 300 mm. Maximum tool weight: 12 kg. Tool change time: 20 sec.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, A used CNC gantry milling machine with carousel turning unit / C-axis for turning operations Hirth coupling TRAVEL DISTANCES X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, as well as CNC turning, CNC milling, and angle head machining — all in a single setup, combined with the speed and precision of a CNC gantry mill. C-axis for turning applications Original price: €1.8 million Dismantling: by arrangement Kwjdpfovvh T Ssx Abbot The machine comes with a protective cover to prevent chips from entering the Hirth coupling on the ram during milling operations. Includes a turning adapter head for turning tools and an angle head for side machining on the platen field or rotary table. You can index this in 2.5° increments via the Hirth coupling. All tool holders (milling, turning, angle head) use HSK-100 clamping. A radio touch probe from M&H (Hexagon) for measuring and setting the zero point is included with the machine. The machine is in operation and can be inspected on site by prior arrangement. A video of the machine is available.

Stanje: rabljeno, Leto izdelave: 2009, x-travel: 3,000 mm y-travel: 2,500 mm z-travel: 2,475 mm w-axis: 800 mm Rotary table: Juaristi MG-12 Rotary table surface: 2,000 x 2,500 mm T-slots: 11 T-slot width: 170 mm Table load capacity: 8,000 kg Table rotation (B-axis): 0.001° CNC control: HEIDENHAIN iTNC-530 Quill diameter: 130 mm Spindle speed: 3,000 rpm Tool holder: ISO 50 DIN 69871/1-B Swiveling: +/- 2.5° Spindle motor: 30 kW Kodpju D I R Djfx Abbswt Gear stages: 2 Speeds: 0–2,500 rpm Boring spindle: D’ANDREA UT5-800-S mm/min Diameter: 800 mm Cross travel: 250 mm Tool changer: 30 positions Internal coolant supply: 20 bar Chip conveyor: included Handwheel: HEIDENHAIN HR-420 Machine weight: approx. 45 t Space requirements: approx. 9,800 x 7,320 x 5,500 mm - RENISHAW RMP-60

Stanje: rabljeno, Leto izdelave: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For the hobbing of cylindrical and worm gears as well as all other regularly occurring hobbed profiles and shapes on cylindrical workpiece circumferences. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing of cylindrical gears for a wide range of industries: wind energy, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range is designed with future tool developments in mind. Of course, the hobbing head drive is also backlash-free. These machines are particularly suitable for the use of state-of-the-art cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped for both methods with the appropriate chip conveyor. The machine is equipped with an internal profile milling head as a motor-driven milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm --> Maximum machinable diameter: approx. 2,800 mm --> Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm --> Maximum axial slide travel (special version): 1,300 mm --> Maximum clampable cutter (internal milling head): --> Maximum diameter: 440 mm --> Maximum cutter width: 90 mm --> Swivel range of internal profile milling head/vertical axis: +/- 15° --> Cutter arbor taper: HSK-B160 --> Maximum cutter traverse path: 300 mm --> Table diameter: 2,500 mm --> Index gear diameter: 2,200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40,000 kg --> Max. feed and rapid traverse speeds: --> Axial (Z-axis): 4,000 mm/min --> Radial (X-axis): 3,000 mm/min --> Tangential (Y-axis): 3,000 mm/min --> Cutter cooling lubrication system/Electric centrifugal pump: approx. 150 l/min --> Discharge height of elevated magnetic chip conveyor: 1,600 mm --> Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motorized milling head instead of standard motorized milling head --> Max. machinable profile depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm --> Infinitely variable cutter speed: 50 – 150 rpm --> Max. cutter diameter: 440 mm Kodpfxewzyp Ij Abbjwt --> Min. cutter root circle diameter: 310 mm --> Max. cutter width: 90 mm --> Min. internal diameter at 0° helix angle: 800 mm *) --> Max. workpiece height at 0° helix angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm