žična elektroerozijska rezalnica

Charmilles Robofil 510

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm Rjdpfx Asvy Ihdjg Tsp T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.850 mm, skupna dolžina: 12.125 mm, skupna širina: 5.150 mm, skupna masa: 8.000 kg, trajanje garancije: 12 meseci, notranja višina: 5.000 mm, notranja dolžina: 12.000 mm, notranja širina: 5.000 mm, Oprema: kabina, osvetlitev, PAINT SPRAY BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance gates: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm must be taken into account – can be positioned on the right or left side. - Construction: galvanized steel frame structure - Heat exchanger: high-quality stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame structure prevents vibrations and the air surge effect from the main supply air duct. Double-layered roof design: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: jet turbine 7.5 kW – 2 units - Exhaust air system: jet turbine 7.5 kW – 2 units Air filter system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 slanted fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated in the right, left, and rear walls Burner: Riello – 2 units, Oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the booth roof Redsxm U Exopfx Ag Tjp - Insulated roof - Pass-through doors - Water wall - Paint finish according to RAL color chart - EX version (explosion-proof) available

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, nazivna (navidezna) moč: 10 kVA, skupna masa: 6.500 kg, največja hitrost vretena: 20.000 obr/min, Heidenhain TNC530, delilnik – 4. os vreteno 20.000 vrt./min, HSK 63 miza 850 x 530 mm hodi 600 x 450 x 450 mm menjalec 30 orodij teža 6500 kg Rodpfx Asw Dc Ireg Tsp

Leto izdelave: 2020, Stanje: zelo dobro (rabljeno), 2 bucket attachments with quick coupler (type DMR) Rodpfjtu Nmdox Ag Tsp

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Rjdpfeph Uk Nex Ag Tsp Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Rsdpfx Asvx Uvfeg Tep Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Rsdpot Uw Avsfx Ag Tsp Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approximate machine weight: 16 t Required installation space: approx. 12 x 10 x 8 m Minimum/maximum grinding wheel diameter: 420-610 mm Grinding wheel diameter x width - internal: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Centerless grinding with automation and PPM Marposs; Güdel Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this grinding method with CBN grinding wheels, resulting in significant productivity advantages, especially for high-volume production, due to the long service life of the grinding wheels. In addition, simultaneous material removal over the entire workpiece length allows for significantly reduced machining times in both mass production and small batch sizes. JUPITER Grinding Processes There are two forms of centerless grinding: through-feed grinding and plunge grinding. Both processes can be performed with the JUPITER series. Typical applications for through-feed grinding: Bolts and bearing bodies, large rings, small rings, piston components (e.g., for compressors), shafts with constant diameter, piston rods (e.g., for shock absorbers), small pistons for hydraulics and injection, precision wires and rods, piston pins. Typical applications for plunge grinding: Rotor shafts, gearbox components, bearing surfaces of camshafts, tube sections for assembled camshafts, universal joints, needle parts for injection systems, valve stems, barrel rollers.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 550 mm, pomik po osi Z: 550 mm, število mest v zalogovniku orodij: 30, proizvajalec krmilnikov: Siemens, skupna višina: 2.560 mm, skupna dolžina: 2.350 mm, skupna širina: 2.160 mm, skupna masa: 4.300 kg, dolžina mize: 1.000 mm, širina mize: 550 mm, model krmilnika: 828D + Shopmill, dovod hladilne tekočine: 20 letvica, razdalja od središča mize do nosu vretena: 700 mm, hitri pomik na osi Z: 36 m/min, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, nos vretena: SK 40, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 100 obr/min, obremenitev mize: 800 kg, premer orodja: 76 mm, dolžina orodja: 300 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Vključena oprema med drugim: priprava za 4. in 5. os, robustna valjčna vodila na vseh oseh, sistem hlajenja vretena (oljno hlajenje), hiter dvoramenski izmenjevalec orodij s predizbiro in vertikalnim magazinom za 30 orodij, transportni trak za ostružke z verižnim trakom, hladilno sredstvo skozi vreteno z visokotlačno črpalko 20 bar, pihanje skozi vreteno, pištola za hladilno sredstvo, premično elektronsko ročno kolo. Na željo lahko ponudimo to napravo z ustrezno vrtljivo mizo za 4. in 5. os. Prosimo, navedite to v svojem povpraševanju! Rsdpfx Asdkh Tijg Tjp

Stanje: rabljeno, Leto izdelave: 2006, x-axis travel 1,000 mm y-axis travel 1,000 mm z-axis travel 1,200 mm C-axis 360 x 0.001° A-axis ° Control: SINUMERIK 840D Powerline SIEMENS Table size 900 x 700 mm Milling spindle taper HSK-A100 Spindle speeds – stepless up to 12,000 rpm Tool magazine: chain magazine, 180 positions Total power requirement 85 kW Machine weight approx. 20.5 t Space requirement approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control system: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC swivel rotary table Rotoclear window Prepared for probe Blum laser tool measurement Vibration sensor Tool taper cleaning Rjdow E Nnnspfx Ag Tjp 4th operating mode ICS with 2 pumps, 40 bar and 80 bar Chip conveyor Band filter system Mist and smoke separator Cooling/heating unit