Noris- iztiskalnik MINI 20/25 D

noris plastic GmbH MINI 20/25 D

Stanje: dober (rabljeno),

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Kedpfjq R Tkwex Ai Nedp Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Električne priključne vrednosti: 3 / N / PE Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Kdjdpfx Aehy Tp Doi Nsp Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment Kdjdpfx Aisx D Hbts Nsp • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control system: x-motion Plus control with 15" SmartTouch

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, HITRI DVOKRATNI HLADNI STISKALNICI NATIONAL M5 Za proizvodnjo delno preluknjanih delov Popolnoma delujoča Pravkar servisirana! Nova električna napeljava. Število matric: 1 Število kosov na minuto: 300 Dolžina zakovice: 20 mm Globina preboja (max): 5 mm Premer reza: 5 mm Tlorisna širina: 1.300 mm Tlorisna dolžina: 2.690 mm Kdedpfxotxni Nj Ai Nep Moč glavnega motorja: 7,5 KW Neto teža: 3.100 kg Bruto teža: 3.700 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Wide slot die Serial No.: L 1081-041391 // Smoothing unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film line with 1080 mm usable width Equipment / Further details: Max. gross PP output up to 1000 kg/h with film width up to 1200 mm Special feature: winder system allowing the slitting of narrow films (150 mm - 100 mm) or, for example: 8 x 175 mm or 2 x 700 mm A die lip for maximum film thickness up to 2 mm, up to 1000 kg/h. Total power consumption: 211 kW/h Ksdpow Tbr Hofx Ai Njdp Main motor capacity: 250 kW Min. film thickness in PS: 0.68 mm / Min. in PP: 0.75 mm Maximum calender speed: 50 m/min mechanically possible Consisting of: - Maguire 5-compartment dosing unit - Extruder (screw dia. 160 mm) Amut EA 160 // Year: 2003 - Screen changer (for cleaning in food production) - Melt pump - Wide slot die (1 insert) 120 cm - Die lip for film thickness up to 2 mm, up to 1000 kg/h - Calender 140 cm - Thickness gauge SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) - Winder (film buffer during roll change) - Cutting machine & film haul-off - Film winding unit (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete available infrastructure: control cabinets, pumps etc.

Stanje: rabljeno, Table length 400 mm Kodovwgq Sspfx Ai Njdp Table width 300 mm X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight: approx. 90 g Kedpfx Ajg Emvhoi Nsdp

Stanje: rabljeno, Leto izdelave: 2003, potovalna razdalja osi X: 320 mm, pomik osi Y: 220 mm, pomik po osi Z: 180 mm, CNC žična erozijska stroj Fanuc Tip Robocut Alpha O I B Leto izdelave 2003 Hod po osi XY: 320 x 220 mm Kdjdpfx Aijyankpe Nep Hod po osi U/V: plus / minus 60 mm Nastavitev osi Z: 180 mm Vpenjalna površina: 530 x 360 mm Maksimalna višina obdelovanca: 180 mm Notranji prostor: 70 x 430 mm Maksimalna teža obdelovanca: 500 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.065.0, vpenjalna sila: 200 kN, New digital control system from BBM Kedpfx Ajw Dcybji Nodp Two sets of extruder heads (see attached pictures)