Obrobljanje robov

CGA Italia 532K (104 mm)

Stanje: novo, Leto izdelave: 2025, Različni lepilni rezervoarji za lepilne trakove in obrezovanje na strojih za lepljenje robov. Dobavljamo nove lepilne rezervoarje ali obnovimo vaše rabljene. Prodajamo tudi posamezne nadomestne dele. Scm, Stefani, Idm, Ima, Biesse. Itsdpsf Tc Rqsfx Ah Asr

Stanje: rabljeno, BRANDT highflex 1440 edge bander Well equipped, Pre-milling units Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom milling unit Itodpfov H D S Sjx Ah Ajr 2 x corner rounding units Profile scraper Flat scraper Polishing unit The machine features NC-controlled milling units and a pneumatic package Maximum workpiece height: 60 mm Maximum edge thickness (in rolls): 3 mm Feed speed max: 14 m/min The machine is fully operational and can be inspected prior to purchase.

Stanje: zelo dobro (rabljeno), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, sliding table length: 320 cm main motor: 7 kW 3 spindle speeds maximum blade diameter: 450 mm tilt adjustment 0–45° electrically controlled with digital readout Itsdpfx Ahsv S Hy Ao Aer blade height adjustment electrically controlled, without readout drip fence (rip fence) on the right, motorized adjustment up to 1240 mm digital readouts on carriage crosscut fence angle-cutting device included Branded machine in very good condition.

Stanje: rabljeno, številka stroja/vozila: 006042, Tip nameščene obloge: tanka obloga, močna obloga Leplilni sistem: EVA Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. hitrost podajanja: 25 m/min Ijdpfxjwacqlj Ah Ajtr Maksimalna debelina plošče: 40 mm Delovni agregati: 9 kos

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2875, premer žaginega lista: 500 mm, dolžina podajanja os X: 180 mm, dolžina pomika po osi Y: 155 mm, dolžina podajanja os Z: 6.000 mm, skupna dolžina: 9.000 mm, skupna širina: 2.700 mm, skupna višina: 1.700 mm, največja hitrost vrtenja: 2.800 obr/min, skupna masa: 1.500 kg, vrtilni razpon: 45 °, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, kabina, vrtilna hitrost brezstopenjsko nastavljiva, The TK 804/1 is an automatic system for the processing and cutting of aluminium profiles, specifically designed to minimize manual intervention by the operator throughout the entire work cycle, limiting it solely to loading and unloading the profiles. The machine can be equipped with up to four electrospindles, allowing drilling operations to be performed on the profiles prior to cutting. Itjdpfx Aowuuansh Aer

Stanje: dober (rabljeno), Leto izdelave: 2009, Edge banding machine Brandt KDF 891, serial no. 0-261-04-5551, year of manufacture 2009, equipped with Brandt Power Control PC20+ control unit. Includes Ligmatech return unit ZHR 05/R/085, year 2009, serial no. 0-305-06-2999. The transport belt is approximately 9 meters long with a belt width of approx. 80 cm. Itedpfjv Rvp Rjx Ah Ajr

Stanje: zelo dobro (rabljeno), PERTICI UNIVER 50 POLAVTOMATSKA KROŽNA ŽAGA Stroj je zasnovan predvsem za rezanje aluminijastih in PVC profilov. Isdsxp Rx Tepfx Ah Aotr Zaščite so posebej skrbno izvedene, tako z mehanskega kot z električnega vidika. Med rezanjem od spodaj navzgor je operater zaščiten z zgornjim zaščitnim pokrovom in obdelovanim profilom. Kot reza se lahko nastavlja med 0 in 67,5 stopinj na levo in desno z ročnim vrtenjem vrtljive mize. Sedem fiksnih postankov (67,5 - 60 - 45 - 0 - 45 - 60 - 67,5) omogoča rezanje brez nastavljanja. Ostale položaje se nastavi s pomočjo kotne merske letve. Motor 5,5 KM Trofazno napajanje Premer rezila 500 mm Kapaciteta reza pri 90°: Ø 178 mm ali 160 x 160 mm 1 karbidna rezila Ø 500 mm 2 vertikalna pnevmatska vpenjala 2 horizontalna pnevmatska vpenjala Mazanje rezila.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, - Debelina obdelovanca do 60 mm Itjdpfx Ahew R T Ale Aor - Debelina robnega traku do 3 mm - Pomik: 16 - 20 m/min - Skupna dolžina: 9365 mm - Powercontrol PC23 Agregati: - Agregat za nanašanje ločilnega sredstva zgoraj/spodaj - Spojni rezkar 2x 3kW - Lepljenje z 2 koluta zaloge - Kapalni agregat HL 81 0,8kW - Predrezilni agregat FF30 spodaj/zgoraj; 4x 0,4kW - Prostor za 2 dodatna agregata - Profilna strgala PN 10 - Površinsko strgalo - Agregat za nanašanje čistila - Gladilni agregat

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 20 mm, višina izdelka (maks.): 60 mm, največja širina izdelka: 55 mm, TECHNICAL DETAILS Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA Jointing cutter: yes Multifunction unit: yes Number of working units: 8 Panel thickness: 12 - 60 mm Panel width: min. 55 mm Edge thickness: 0.3 - 20 mm Feed speed: 24 m/min Pressure: rubberised belt Panel guidance Panel support guidance: yes With NC positioning: yes Mounted units in the sizing section Unit: Corrections Automatic engagement by time: yes Additional systems Edge pre-heating lamps: yes Coil magazine: yes Number of positions: 2 Itodpfev Eakhox Ah Aer Glue pot for hot-melt glue: yes Hot-melt pre-fuser: HOT MELT A34 Edge pressure roller track: yes Mounted units in the edge processing section Number of units: 6 Unit 1: End trimming unit Manufacturer model: HL 81 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Unit 2: Top milling unit Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Unit 3: Multifunction unit Manufacturer model: FK 13 Number of motors: 2 Automatic tool change: yes With NC positioning: yes Processing speed: 20 m/min Motor power: 0.4 kW Speed: 12,000 rpm Unit 4: Edge scraper Manufacturer model: MN 21 With NC positioning: yes Unit 5: Glue scraper Unit 6: Buffing unit Number of motors: 2 Motor power: 0.18 kW Speed: 14,000 rpm Additional systems Spraying unit: RIEPE LP 163/93 Control system: PC 22 CE marking: yes