Stroj za upogibanje cevi

Cesurbend PBNC-65

Stanje: novo, Cesurbend ohýbačka trubek s trnem / trubková ohýbačka PBNC-65 A Technické údaje Max. průměr trubky (měkká ocel) 63 mm Max. tloušťka stěny trubky (mm) 3 mm Max. úhel ohybu (°) 190 Rychlost ohýbání trubek (d/min) 7-10 Max. hydraulický tlak (bar) 200 Max. poloměr ohybu (mm) 250 Min. poloměr ohybu (mm) 45 Délka trubky (mm) 4000 Tolerance ohýbání (mm) ±0,25 mm Výkon ohýbacího motoru (kW) 7,5 Výkon hydraulického motoru (kW) 4 Kapacita olejové nádrže (l) 50 Šířka stroje (mm) 1500 Délka stroje (mm) 6200 Výška stroje (mm) 1500 Hmotnost stroje (kg) 2000 Vlastnosti Dedsxvzt Uopfx Abtouu • Stroj je vybaven 5 písty • U našich standardních NC strojů je dosaženo nastavení vzdálenosti a rotace po ohybu pomocí zařízení pro podporu obsluhy a zařízení pro paralelitu. • Díky systému NC Car můžete sledovat průběh a rotační pozice ohybů a dosáhnout tak rychlejšího a bezchybného ohýbání.

Stanje: dober (rabljeno), Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate Duedefc T Tqepfx Abtju - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg

Leto izdelave: 1977, stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Drilling heads included on both sides at the front. Very good condition. Available immediately. Dodjd N Rb Djpfx Abtjuu

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 250 h, številka stroja/vozila: 0131, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 48 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 180 °, skupna masa: 670 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 1, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, T U B O M A T – simply smart. TUB-C G3001 The pipe bending machine is ideally suited for single part and small batch production. Using the software, individual pipes can be parameterized, simulated, and saved. The bending data is then transmitted to the machine via a network (LAN). Basic Bending Equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-level bending angle preselection or program operation - 80 memory locations for up to 10 sets - Set/actual value display for bending angle - Compact, forward-positioned bending head - Optimized tool concept - Hydraulic bending drive, operated with a proven hand lever - Hydraulic pipe clamping - Hydraulic pressure die adjustment - Hydraulic mandrel extractor - Mobile machine design - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal basic drive unit for mounting attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+10° overbending) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection specs: 400 V / 50 Hz / 3-phase - Power plug: CEE 16 A Dedpfxex E Rdwo Abtsuu - Colours: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic Package Pipe Bending Software - Oracle Express database for single-user application - Creation of isometrics (single tubes) - ConCSVImp – Interface for CSV format import - Calculation of bending data considering springback, elongation, and rebound - Verification of clamping lengths and start/finish lengths - Output of bending data (printout) - BendSim – Bending simulation and graphical display via parametric tool design - BendCon – Creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rollers with 25 mm mounting bore 1 clamp adapter assembly space 100 mm 1 support for fixed pressure die assembly space 100 mm Bending Tools Bending tools consisting of bending roller, clamping block, and fixed pressure die Tube Ø / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel pipes Design with lubricant channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly fittings for cutting ring connectors (L=light, S=heavy duty) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses available. The machine is used but in like-new condition. The machine can be inspected and demonstrated by arrangement. The machine must be collected from us, but we can assist with loading. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors excepted.

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN1744271, overhead crane approx. 12,105 mm x 5,000 kg Djdpov Ipvxsfx Abtjuu

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: Dsdpfx Aong Amksbtouu • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) Dsdpfx Abjxcuicotouu • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Djdpfxsttah Ro Abtjuu Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325 mm x 10,000 kg. These two cranes have been installed together in the same hall and are equipped with tandem control. We can optionally supply the cranes including: Djdjya Ag Sjpfx Abteuu * Installation and inspection * Conductor rails * Radio remote control * Master-master controls Jan Reiling B.V. also supplies new cranes, fully customised, at highly competitive prices. * Overhead bridge cranes * Suspension cranes * Jib cranes * KBK track cranes * Boat lifts All our new and used cranes delivered with installation come with warranty! In addition, we have our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead travelling crane. Single girder, single-girder, single beam. Chain hoist, chain hoists.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, radij upogibanja (maks.): 600 mm, dolžina vpenjala: 1.200 mm, debelina stene: 8 mm,