Stroj za upogibanje cevi

Cesurbend PBNC-51

Stanje: novo, Cesurbend stroj za upogibanje z vdiralnim trnom / stroj za upogibanje cevi PBNC-51 A Tehnične specifikacije Najv. premer cevi (mehko jeklo) 51 mm Ijdpoxvzr Rofx Abxsau Najv. debelina stene cevi (mm) 3 Najv. kot upogiba (°) 190 Hitrost upogibanja (cevi/min) 7–10 Najv. hidravlični tlak (bar) 200 Najv. radij upogiba (mm) 250 Dolžina cevi (mm) 4000 Moč motorja za upogibanje (kW) 5,5 Moč hidravličnega motorja (kW) 3 Širina stroja (mm) 1300 Dolžina stroja (mm) 5750 Višina stroja (mm) 1500 Teža stroja (kg) 2000 Lastnosti • Pri naših standardnih NC strojih se pomik in rotacija po upogibanju izvajata preko naprave za asistenco operaterju in sistema za paralelnost. • Omogoča vam hitrejše in brezhibno upogibanje s spremljanjem napredka in položaja rotacije upogibov, ki so izvedeni z našimi stroji z NC Car sistemom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed Iedjtr U Hljpfx Abxsau → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) Ijdpfjttah Rex Abxjau → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: novo, Leto izdelave: 2026, Mandrelless Tube Bending Machine RB 54 – NC controlled, with large program memory Item number: 4300054 NC control for setting bending angles Up to 50 programs storable High-quality, robust construction Rapid tool change Fully motorized drive Automatically returns to starting position TECHNICAL DATA General Information Maximum bending radius: 162 mm Iaedjvk Scgjpfx Abxou Maximum bending angle: 210° Bending speed: 2 rpm Torque: 2,341 Nm Dimensions and Weights Length (approx.): 600 mm Width/Depth (approx.): 220 mm Height (approx.): 470 mm Net weight (approx.): 107 kg Bending Capacities Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor power: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Location: ex stock - immediately available -

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Rabljeni stroj za krivljenje cevi Jutec Tip: 5000 Kapaciteta: do pribl. 40 mm Isdpoyfmwxsfx Abxsau Dolžina trna: 4500 mm CNC vodenje Avtomatska glava Ročno vrtljiva glava s hidravličnim vpenjanjem Vključno s 3 kompleti orodij Letnik izdelave: 2009 Zelo malo uporabljen

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, Premer cevi (maks.): 51 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 Die Sets (1 set of Rolling Dies and 2 sets of Bending Dies, or 3 sets of Bending Dies, as per requested dimensions) • 5-axis servo control (Y, B, C, H, V) Iedpexircaofx Abxsau • Servo Motorized Feeding Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H, V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending simulation • Collision simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Working Material Length • Calculation of Estimated Bending Time • Conversion from X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop Feature • Remote Assistance • Mandrel Bending and Non-Mandrel Bending • Safety Plate at the Rear of the Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Slide System • Hydraulic Chuck Clamp • Electrical Panel Safety Lock and Panel Key Lock • Electrical System Cooler • Overload Protection • Detailed Working Report Sent Automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional Die Sets • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Extra Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kw Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Stanje: novo, Leto izdelave: 2025, AHB-20A Vijačni kompresor posebej za laserske stroje Dvojni režim uporabe: 8 do 16 bar Priključek G3/4 380 V, 3 faze, 50Hz Pretok zraka: 1,2 m³/min Rezervoar: 500 l Vključuje visoko učinkoviti hladilni sušilnik zraka Vključuje visoko učinkovite precizne filtre Dovod zraka brez olja in vode Iaodpfxem E Im Te Abxeu Dvostopenjski vijak VKLJUČENO V CENO: 1 zračni filter (menjava po 3000 urah) 2 oljna filtra (prva menjava po 500 urah, druga po 3000 urah) 1 separator (menjava po 3000 urah) Prednosti Visokotlačni vijačni kompresor POSEBEJ ZA LASERSKE STROJE – Integrirana zasnova Kompresor, sušilnik zraka, rezervoar in linijski filtri so integrirani. Ni potrebe po dodatnem cevovodnem povezovanju – pripravljeno za uporabo takoj po priklopu na elektriko. Dovod zraka brez olja in vode Stisnjen zrak običajno vsebuje oljno vodno meglo; visokotlačna uporaba lahko poškoduje zaščitna ogledala na laserju, zmanjšuje moč žarka, razprši fokus, povzroči nepravilno rezanje in izmet. Pametno spremljanje (opcija) Možnost daljinskega nadzora – 24-urno spremljanje prek spleta, ni potrebna posebna prisotnost, telemetrija prek telefona. Ob pojavu napake ali potrebe po servisu sistem samodejno pošlje opozorilo. Visokokakovostni rezervni deli Visokotehnološka vijačna enota Najnovejša zasnova vijakov, visoka natančnost obdelave, zmanjšano puščanje zraka, nižja poraba energije, nižji stroški za kupca. Uvožene elektronske komponente Uvoženi elektronski deli, visoka zaščita in varnost, povečano električno območje za 30–50 %, zagotavljanje stabilnosti delovanja. Visoko učinkovit precizni filtrirni sistem Visokotlačni in visokonatančni filtri, večstopenjska filtracija, zagotovljena oskrba z oljno in vodno čistim zrakom. Rezervoar za zrak velike kapacitete Večja kapaciteta pomeni varčevanje z energijo, debelejši material, boljši blažilni in hladilni učinek, večja stabilnost tlaka. ZA VEČ INFORMACIJ PIŠITE NAM. J.C. Helthuis Coevorden Nizozemska

Stanje: novo, Leto izdelave: 2026, Max. working width: 1330 mm Processable sheet thickness: 0.5 - 80 mm Infinitely variable feed rate: 0.5 - 6 m/min Abrasive belt dimensions: 1910 x 1350 mm Brush element dimensions: 300 x 400 mm Abrasive belt speed: 18 m/s Number of planetary heads with brushes: 8 pcs. Thickness adjustment accuracy: 0.01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Total connected load: 89 kW Standard equipment Machine configuration: 1st station: abrasive belt / 2nd station: brush elements / 3rd station: oscillating roller for surface finishing Main components: PLC: Siemens Touchscreen: Siemens Low-voltage devices: Schneider Frequency converter: Schneider Extraction fan: Elektror, Germany Iodpfx Aeygx A Aobxeau Total connected load: 89 kW Machine with wet dust removal unit Optional equipment Optional feeding modes: 1. Conveyor with strong permanent-magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm) 2. Conveyor with vacuum underpressure adsorption transport (suitable for stainless steel sheets, copper sheets, aluminium sheets, etc. that are not magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Leto izdelave: 2018, obratovalne ure: 1.256 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2189, OKUMA LB3000EX-II – Particularly well-suited for universal turned parts and the complete machining of complex workpieces thanks to generous flat-bed guideways, while high-torque drives ensure outstanding precision and long-term accuracy. TECHNICAL DETAILS Swing over bed: 580 mm Maximum turning diameter: 340 mm Workpiece length: 950 mm Travel distance X / Z / Y: 230 / 510 / 120 (+70/-50) mm C-axis: 360 / 0.001° Iaedpfjnt T Auex Abxsu Control: OKUMA OSP-P300LA Rapid traverse X / Z / Y: 25 / 30 / 12.5 m/min Stroke: 1015 mm Spindle speed: 4200 rpm Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm Toolholder: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6000 rpm Operating hours: 1,256 h Control on: 1,660 h MACHINE DETAILS Dimensions (L x W x H): 3,420 x 2,041 x 2,444 mm Weight: 6,600 kg Connection voltage: 400 V, 3 phase, 50 Hz Power consumption: 38.9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hob milling toolholder (see document in attachment) is not included in the scope of delivery.

Stanje: novo, Condition: New Delivery time: approx. 12 – 14 weeks from order Country of origin: Italy Price: €32,900 Leasing rate: €628.39 Max. diameter (steel tube): 50 mm Length: 4000 mm Width: 950 mm Height: 1250 mm Weight: 430 kg Max. bending section modulus: 6 cm³ Standard steel tube: 50 x 3.31 mm Gas tube for pipelines: Ø 1”1/4 mm Stainless steel: Ø 50 x 2.5 mm Square tube: 40 x 40 x 4 mm Rectangular tube (horizontal): 25 x 50 x 6 mm Iaodpeynmrnofx Abxsu Rectangular tube (vertical): 50 x 25 x 2.7 mm Max. outside diameter: 60 mm Max. bending radius: 200 mm Min. bending radius: 20 mm Max. bending angle: 210° Speed: 1.25 / 2.5 Motor: 3.5 kW Hydraulic tank capacity: 15 l With mandrel bending device, length 3 m Can be used with or without mandrel Programmable bending angle (C-axis) with intuitive NC control Manual longitudinal feed (Y1 axis) and tube rotation (B axis) with mechanical stops and digital readouts Two speed levels Independent adjustment of clamping and pressure dies Patented system for stabilizing the hydraulic pressure of the pressure die Quick-change tool system Pneumatic jaw clamping Operating manual ALTERNATIVE: Model with 6 m mandrel bending device – price on request