Stroji za polnjenje in etiketiranje

Cavagnino&Gatti Bottling 13.000 bph Bottling Labeller Adhesive

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, For sale: (For further extensive technical data, see PDF) Technical Details of the Machine: - Long-tube filling system with 40 filling valves and 8 counterpressure pistons - Pre-evacuation system to reduce oxygen intake - Hygienic bottle table and stainless steel components for durability - Mechanical adjustment range: 3,000 to 15,000 bottles/hour - Capacity range: 0.33l LN 3,000–13,500 bottles/hr, 0.5l NRW 3,000–12,000 bottles/hr - Low oxygen pickup: max. 0.02 mg O2/l - Conversion parts included for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the Machine: This machine offers numerous benefits that enhance the quality of the filling process. - Smooth, product-friendly filling under CO2 atmosphere - 50–60% lower CO2 consumption compared to short-tube fillers - High durability due to reinforced drive elements - Hygienic design makes cleaning easier - Short changeover times - Convertible to cans according to the manufacturer (conversion kit not included) Low operating hours: 3 days/week at 7 hours each; rarely used for 4 days/week Annual maintenance by the manufacturer The machine is immediately available and was only decommissioned about 5 months ago. Original purchase price was approx. €330,000 Dusdpfxjwqz Nno Af Ssr

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Dusdpfxsh Eld Ee Af Ser Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Stanje: skoraj kot novo (rabljeno), Used Bottling Line | Used Beverage Line | Wine MBF NP 574 | Bottling Line for Still Wine Year: 2011 Speed: 10,000 Bph Cap Elevator Dodpfxetr Hd Sj Af Seur MBF 45.50.6 Filling Monoblock | Year: 2011 45-clamp rinser 50-valve filler 6-head screw capper Bottle dryer Bottle inspector | Level control Sacmi Kube labeller | Year: 2017 Nr. 6 adhesive stations Cermex carton former Nordson gluer TMG case packer DS Smith case sealer Nordson gluer Case weigher CONVEYOR BELTS NOT INCLUDED

Stanje: rabljeno, obratovalne ure: 35.000 h, številka stroja/vozila: LC581, Used Complete CSD Can Filling Line – 14,000 Cans/Hour – Overview This used, complete can filling line for carbonated soft drinks (CSD) is designed for the production and industrial packaging of carbonated beverages, achieving up to 14,000 cans per hour in the 250 ml format. The heart of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 can seamer with 6 heads (can end size 200). The scope includes depalletizing, can rinsing, filling and seaming, tunnel pasteurization, inline inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used filling line solution. Technical Specifications & Performance Data Core Monoblock: Filler-Seamer Filler: Ortmann Herbst, isobaric, 45 valves (Year of manufacture: 1980) Seamer: Ferrum 706, 6 heads (Year of manufacture: 1982) Product type: carbonated soft drinks (CSD) Rated output: 14,000 cans/hour at 250 ml Can end: Type 200 (Industry size 200) Monoblock configuration: integrated filler-seamer block to minimize dissolved oxygen (DO) pickup Formats & Throughput Primary can format: 250 ml Line speed: up to 14,000 CPH (depending on format and product) Included Process Equipment Kaeser compressor system with booster and two compressed air tanks (Year of manufacture 2010, commissioning 2011) CIP system, three tanks (Year of manufacture 2011) Syrup room with cooling system (Year of manufacture 2011) Nagema mixer (Year of manufacture 1992) Five finished beverage tanks, each 10,000 liters (100 hl), steel with food-grade lining Beverage filter (Year of manufacture 2011) Frezart can depalletizer (Year of manufacture 2009, commissioning 2011) Two can washers, adapted to 250 ml (Year of manufacture 2011) Hermis tunnel pasteurizer (Year of manufacture 2015) Stratec fill level inspection for cans (Year of manufacture 2000) Victor can marker / coder (Year of manufacture 2020) Kisters packaging machine (Year of manufacture 1993) Keber palletizer (Year of manufacture 1997) Sita stretch wrapper (Year of manufacture 2011) Complete conveyor system connecting all machines + two can accumulation turntables (Year of manufacture 2011) Thermo-shrink labeling line for plain cans (Year of manufacture 2015) Advanced Automation & Control Systems Inline quality control: Stratec fill level inspection for continuous monitoring and rejection of out-of-specification containers Product coding: Victor industrial printer for date/batch coding CIP capability: three-tank CIP system supports hygienic cleaning cycles for fillers and product pathways Integrated conveying and accumulation technology: conveyors with two turntables ensure even flow and buffer management for maximum uptime Detailed electrical and control documentation available upon request. Integration Options into the Production Line Upstream Section Depalletizing of empty cans (Frezart) and transfer to the can washer Dual can washers, adapted to the 250 ml format... Dsdpfx Asyhbpzef Ssur

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: AT91, Used CIP Tetra Pak Year 2010 15T/h The used CIP Tetra Pak, year of manufacture 2010, with a capacity of 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing facilities. As such, this system ensures an effective hygiene cycle without requiring dismantling of the production line, thereby optimizing downtime and reducing both water and cleaning agent consumption. Tetra Pak built the used CIP system in 2010 with a throughput of 15 tons per hour. Its operational capacity of 15 tons per hour makes it suitable for highly productive plants while ensuring hygiene standards compliant with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak 2010 15T/h The Tetra Alcip 1 applies a controlled wash cycle to remove organic and inorganic residues from production circuits. The system includes separate tanks for water, alkaline cleaner, and acid, and automatically regulates temperature, chemical concentration, and wash time according to the requirements of the facility. This enhances the efficiency of cleaning operations. Moreover, the used CIP Tetra Pak 2010 15T/h automates the cleaning process, reduces the risk of cross-contamination, and improves production efficiency. The system also allows operators to configure various wash parameters, enabling adaptation to specific production requirements and ensuring thorough cleaning of filling lines, pipelines, and heat exchangers. Safety and Process Control Djdpfx Aowga Iusf Ssur The system features advanced safety functions, such as: - Sensors for continuous monitoring of cleaning agent concentrations. - Temperature and pressure controls throughout the cleaning cycle to ensure optimal performance. - Alarm systems that detect and manage process anomalies, thus preventing potential failures. These features ensure the reliable operation of this used CIP system, minimize operational errors, and optimize the consumption of water and chemicals. Automated system monitoring also increases safety while reducing maintenance requirements. Operational Advantages Using this used CIP Tetra Pak enhances plant productivity in several ways. Firstly, it reduces downtime: the continuous wash system completes fast cleaning cycles without needing to dismantle components. Additionally, it optimizes resource use: the automatic detergent dosing system prevents chemical wastage. Furthermore, it ensures regulatory compliance: the system meets high hygiene standards and fulfills industry regulations. At the same time, the automated nature of this system helps manufacturers streamline their cleaning procedures. As a result, companies benefit from improved production continuity and lower operating costs. Likewise, the option to configure cleaning...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, številka stroja/vozila: FT2K-3403,

Stanje: rabljeno, Leto izdelave: 2017, Overview This complete beverage can filling line was manufactured in 2017 by the German producer KHS. The line is designed for beverage production with a capacity of up to 40,000 bph and is in good condition. Technical Data Capacity: 40,000 bottles/hour Filling products: carbonated soft drinks and beer Bottle formats: 500ml 211/202 Djdpfxoyb R Srj Af Ssur Closure formats: 211/202 Packaging formats: tray with film Application: KEG + beer Condition: good technical condition, dismantled Scope of Supply Can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Fill level inspection | KHS | Innocheck CUB | 2012 Blow-off | Europool | - Packaging machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle application | KHS | CSM 050-2 | 2012 Packaging machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Palletizer | KHS | Innopal PBL1N1 | 2012 Stretch wrapper | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR

Stanje: novo, Leto izdelave: 2025, Fully automatic paper labeling machine, controlled via touchscreen, rotary dial, or PLC, with photoelectric sensors. Variable motor speed and conveyor chain belt. - Specifications: Label length: 250–600 mm; label width: 65–195 mm; bottle diameter: 80–190 mm; core diameter of label roll: 76 mm; max. outer diameter of label roll: 300 mm; labeling accuracy: ±1 mm; max. machine cycle rate (idle): 33 cycles/minute; power supply: 220V, 50Hz/60Hz; machine dimensions: L2000 mm × W900 mm × H1500 mm; weight: 350 kg. Please note that our prices for new equipment are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting from around 3 weeks. - All machines are available with a full warranty. Djdpfev Nk R Tsx Af Sjur

Stanje: rabljeno, Leto izdelave: 2003, Labelling machine, manufacturer: Krones, type: Universella 10-4-4, Capacity: 10,000 - 14,000 bottles/h, parallel machine, with 10 bottle plates and 4 glue pallets, Dusdpsunh T Ejfx Af Ssr equipped with 3 set-up kits, with 2 stations for body, neck, and back labels, with 2 heated glue pumps

Stanje: novo, STAPAL Handling specializes in the development, production, and installation of pallet inverters and pallet changers. A professional pallet inverter or pallet changer from STAPAL is the most efficient and safest way to exchange or invert your goods. STAPAL’s pallet inverters and pallet changers are renowned for their robustness, user-friendliness, and high safety standards. The standard models are suitable for exchanging and inverting almost all pallet types. For special applications, the pallet inverters and pallet changers can be fully customized to your requirements. Dusdpfx Afowu Ecms Sor Specifications for standard pallet inverter: -2000 kg load capacity -Clamping range: 2300 mm (other sizes available on request) -Inversion range: 180° -Maximum pallet size: 1250x1250 mm -Fully electric operation (no hydraulic oil required) -16A 400V plug The pallet inverter can be custom-built with almost any conceivable option. Specifications for standard pallet changer: -1500 kg load capacity -Clamping range: 2000 mm (other sizes available on request) -Inversion range: 95° -Maximum pallet size: 1250x1250 mm -16A 400V plug The pallet changer can be custom-built with almost any conceivable option. The pallet inverters are manufactured in the Netherlands by STAPAL, complete with CE certification, documentation, and warranty. STAPAL provides installation and maintenance for all pallet inverters throughout Europe. Contact us for more information or request a non-binding quote.