Stoječi vrtalni stroj radialni vrtalni stroj

Caser F .40

Stanje: rabljeno, Leto izdelave: 1977, Drilling capacity in steel (diameter): 75 mm Arm reach: 1,700 mm Workpiece height - max.: 370 - 1,700 mm Total power requirement: 12 kW Machine weight approx.: 7,000 kg Space requirements approx.: m Manufacturer: CSEPEL (Hungary) Radial drilling machine Model: RFh 75 / 2 000 Year of construction: 1977 61158 _____ Drilling capacity in steel / cast iron: 75 / 90 mm Tapping capacity in steel / cast iron: 60 / 70 mm Maximum arm reach approx.: 1,700 mm Maximum workpiece height: 370 to 1,700 mm Table clamping surface: 1,100 x 2,300 mm Intermediary table approx.: 600 x 1,200 x 300 mm Table height above floor approx.: 600 mm Tool holder: MT 5 21 spindle speeds: 19 – 1,900 rpm 12 feed rates: 0.047 – 2 mm/rev Quill travel: 380 mm Nsdot Hw Uvopfx Ag Teku Vertical adjustment of arm: 950 mm Cross travel of drilling carriage: 1,500 mm Spindle drive approx.: 10 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Dimensions approx.: 3,600 x 1,400 x 3,400 mm (height) Accessories / Special equipment: • Pre-selector switch for hydraulic speed adjustment • Mechanical feed pre-selection • Drilling with or without feed, or with manual fine feed • Drill carriage manually adjustable, vertical arm adjustment via electric motor, feed length/drilling depth set via cams on quill vernier with automatic depth stop and quill return • Electro-mechanical clamping of arm and drilling head via push button • Coolant system integrated in sub-table • VOGEL central lubrication, intermediary table, etc. Condition: satisfactory to good – demonstration under power possible, stable machine with high drilling capacity Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Thread diameter: 12 mm Infinitely variable speed: 375 rpm Nedpfx Aod Iinnsg Tjku Working range: 180 - 2000 mm Motor power: 0.7 kW Weight: 28 kg Electric tapping machines for M3 - M12 threads, angle adjustable. Features a working range of 180 - 2000 mm. Supplied with 7 quick-change chucks with slip clutch. Adjustable via display: - Variable speed - Adjustable depth - Material selection - Selection of main rotation direction - Thread selection.

Stanje: rabljeno, Plate width: 6400 mm Plate depth: 1870 mm Nkodpfx Agjgrm Ngs Teu Plate height: 400 mm Number of T-slots: 6 Edge distance: 130 mm T-slot size: 36 mm T-slot spacing: 280 mm

Leto izdelave: 1979, Stanje: rabljeno, številka stroja/vozila: 79-207, Jaw width: 125 mm Jaw height: 42 mm Clamping range: 202 mm Nkedpfj Avhdjx Ag Tou

Stanje: rabljeno, Leto izdelave: 1966, Technical Details: Drilling capacity in steel (diameter): 63 mm Arm reach: 2000 mm Max. workpiece height: 1270 mm Spindle taper MT: MT 5 Drilling depth: 400 mm (stroke) Quill travel: 400 mm Feed rate: 0.05 - 0.32 m/min Spindle speeds: 14 - 1000 rpm (40/50/63/160+200 without function) Column swiveling: 360 ° Electrical configuration - voltage/frequency: 380/50 V/Hz Base plate: 1900 x 950 mm Total power requirement: 13 kW Machine weight approx.: 7.9 t Required floor space approx. LxWxH: 3.9 x 1.5 x 3.4 m Nksdpfx Agou Id Dbs Tju This radial drilling machine is equipped with an electric sliding table! Further features: - Distance spindle center to column: 360 - 2000 mm - Distance drill chuck to table surface: 1270 mm - Distance spindle to base plate: 1220 - 4520 mm - Drilling capacity in St 60: 63 mm at feed rate 0.32 - Drilling capacity in GG 22: 80 mm at feed rate 0.5 - Horizontal travel of drilling head: 1640 mm - Vertical travel of drilling head: 980 mm - Distance spindle nose to base plate: 430-1770 mm Equipment: - Coolant pump (not operational) - Steady rest - 1 electrically driven sliding table 1250 x 1000 mm, type TI 18 with digital display (machine interface) - incl. machine vice Currently, not all spindle speeds are selectable.

Stanje: rabljeno, Tehnične podrobnosti: Debelina materiala: 1,0 mm Širina materiala: 17,0 mm Notranji premer: 30,0 mm Zunanji premer: 78,0 mm Nodou N E Evepfx Ag Tjku Nadomestni del za namizni vrtalni stroj BT 2 Listnato vzmet – povratna vzmet – spiralna vzmet Izjava o skladnosti po ISO/IEC 17050-1 Na voljo je preskusno potrdilo 3.1 po DIN EN 10204

Leto izdelave: 1990, Stanje: dober (rabljeno), Rabljena hidravlična stiskalnica Bemco, C-okvir, 300 ton, naprodaj Velikost mize: 1200 x 900 mm Prehodna višina (daylight): 1150 mm Nkodpfx Agog S Uc Dj Teu Hod: 700 mm Premer cilindra: 300 mm Na voljo tudi nove C-okvir hidravlične stiskalnice z zmogljivostmi: 30 ton, 60 ton, 100 ton, 150 ton, 200 ton, 250 ton in 300 ton.

Stanje: rabljeno, Leto izdelave: 1990, Length 8000 mm Width 3000 mm Nedpfov Ey Nqex Ag Tjku Quantity 2 Plate thickness 400 mm Machine weight approx. 14 t Required space approx. 8 x 3 x 0.4 m 2 plates available. Each plate has 10 longitudinal T-slots, each 32 mm wide. The offer price is per piece.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, izvrtina vretena: 81 mm, višina središča: 315 mm, širina na sredini: 2.000 mm, skupna masa: 3.100 kg, vizualizacija z 2 osmi Heidenhain Nkodpjx H Sdnsfx Ag Tsu zunanja električna omara kapaciteta 2000x725 mm vrtina 81 mm revolver Multifix luneta

Stanje: pripravljen za uporabo (rabljen), Na voljo je klasični univerzalni rezkalni stroj H. Ernault Somua. Dimenzije mize X/Y: 1600mm/370mm, pomik X/Y/Z: 1000mm/320mm/440mm, vreteno: ISO50, hitrost: 2000 obr/min, moč: 7,3kW. Dimenzije stroja X/Y/Z: pribl. 2700mm/1700mm/1600mm, teža: pribl. 2500kg. NC-prikazovalnik in hladilno-mazalna naprava sta v okvari. Stroj ima odmik 0,4mm na X-osi. Ogled na lokaciji je mogoč. Nkedoxt Rmfjpfx Ag Teu