Drsni podajalnik

Buhrs (W+D) AS 25 / R (rechtslaufend)

Leto izdelave: 2022, Stanje: novo, Suction conveyor with two suction belts Vacuum individually adjustable Speed up to 160 m/min Speed steplessly adjustable Height adjustable Also available in other lengths Iasdpech Hcaofx Af Tol Inkjet base

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Rovema VPI 260E vertical form-fill-seal machine with powder dosing. Optionally available with new control system/operator interface. Iedsiwdgpopfx Af Teal

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Iajdpfx Aoh Eibajf Tjl Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Stanje: novo, Optimum OPTImill MZ 2S Tool Milling Machine Featuring a digital 3-axis position display DP 700 from NEWALL. The feed axes are controlled by an inverter drive via the control panel. Versatile range of applications Iasdpfx Afofnh Sgo Tel Excellent damping properties and rigidity of the machine bed All guides are hardened and precision ground, adjustable via gib strips Automatic feed on X, Y and Z axes, continuously adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screws on all axes Central, clearly arranged control panel with integrated digital position and speed display Heavy-duty, large-scale cross table with high-precision machined surface and 5 T-slots Coolant system Oversized handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product) approx. 1239mm Width/Depth (product) approx. 1168mm Height (product) approx. 1900mm Net weight approx. 1400kg Drill-Milling Head Milling head swiveling range ±90° Drilling-Milling Performance Max. cutter head size 100mm Drilling capacity in steel (S235JR) 30mm Continuous drilling capacity in steel (S235JR) 26mm Max. end mill size 25mm Electrical Data Drive motor power 2.2kW Connection voltage 400V Mains frequency 50Hz Horizontal Milling Table Horizontal table length 750mm Horizontal table width 320mm Distance vertical spindle to horizontal table min. 75mm Distance vertical spindle to horizontal table max. 410mm Horizontal table T-slot size 14mm Horizontal table T-slot number 5 Horizontal table T-slot spacing 63mm Distance horizontal spindle to horizontal table min. 70mm Distance horizontal spindle to horizontal table max. 400mm Maximum horizontal table load 285kg Vertical Milling Table Vertical table length 830mm Vertical table width 250mm Vertical table T-slot size 14mm Vertical table T-slot number 2 Vertical table T-slot spacing 63mm Coolant System Coolant pump drive power 95W Travel Paths Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Automatic X-axis travel approx. 310mm Automatic Y-axis travel approx. 160mm Automatic Z-axis travel 295mm Vertical Spindle Vertical spindle overhang 100mm Vertical spindle taper ISO 40 DIN 2080 Vertical spindle speed range 50 – 1890 rpm Vertical spindle number of speed ranges 12 steps Vertical spindle drawbar M16 Vertical spindle quill travel 120mm Vertical spindle max. load 1100Nm Feed Rate Feed rate X-axis 10 – 600mm/min Feed rate Y-axis 10 – 600mm/min Feed rate Z-axis 10 – 600mm/min Electrical Connection Total connected load 4kW Motors Rapid traverse X-axis drive motor power 0.375kW Rapid traverse Y-axis drive motor power 0.375kW Rapid traverse Z-axis drive motor power 0.375kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 MT1 and MT2 sleeves Horizontal milling spindle Ø 27 mm Operating tools

Stanje: generalkompletno obnovljen (rabljeno), RA250D oxygen version, oil-free assembly and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. We currently have several oxygen vacuum pumps in stock. Iedjd R Trnjpfx Af Tsal

Leto izdelave: 2014, Stanje: rabljeno, Multiweigh 10-glavična večglavna tehtnica. Izjemne večglavne tehtnice proizvajalca Multiweigh. Naprave so v zelo dobrem stanju in takoj pripravljene za proizvodnjo. Ijdpfsubf A Nox Af Teal - Velike posode iz nerjavečega jekla - Ojačana izvedba - 10 glav z dovajalnim prstanom - Zbirna loputa

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Drying system / dryer suitable for various materials such as powders, granulates, etc. - Control system for temperature regulation This machine is connected and ready for testing in our machinery hall. Iasdpfjqu R Naex Af Tel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Two sachet machines by Merz for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified in 2008. Sachet width range: 15 mm – 160 mm, sachet length range: 15 mm – 200 mm, fill volume range: 0.2 ml – 250 ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified in 2000. Both packaging machines are duplex-capable. Documentation is available. On-site inspection is possible. Individual sale is possible. Iaedpjvcpz Rjfx Af Tsl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Our horizontal form, fill and seal machine from the DEAPHS series is specifically designed for the filling of 3- and 4-side sealed sachets and Doypack pouches. Thanks to various dosing systems such as auger fillers, volumetric cup fillers, and multihead weighers, the machine reliably packages powdery, liquid, and granular products. The machine also independently manufactures the pouches to be filled directly from flat film, providing a cost-effective and efficient packaging solution. Thanks to the modular design of the form, fill, and seal machine, it can be easily and quickly converted or expanded. ✅ Perfectly suitable for food, pet food, pharmaceutical products, cosmetics, and other non-food items. ✅ Also ideal for filling small product quantities and samples – for example, in our mini pouches. ✅ Optional accessories such as volumetric cup filling systems, multihead combination weighers, piston fillers, and Hibar pump fillers available. ✅ Matching packaging material (pouches & film) also available from us. Independent film unwind shaft: Ensures excellent control of film tension; flexible adaptation to film roll width and pouch specifications possible; improved Doypack shaping. Configuration: - Film unwind shaft - Bottom pouch sealing - Pouch bottom forming - Three horizontal sealing units - Two vertical sealing units - Servo-driven pouch pull-off - Mechanical pouch cutting - Vacuum pouch opening Iasdpeum R Ezjfx Af Tjl - Photocell control - LCD touch display - PLC – Panasonic - Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-phase, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Stanje: novo, The Servoturn 500/2000 is a state-of-the-art universal lathe classified under conventional lathes and belongs to the product group of servo lathes. This machine combines advanced feed technology with proven engineering, making the transition to servo-conventional lathes both more attractive and cost-effective. Equipped with powerful servo motors and precision ball screw drives on all axes, the Servoturn 500/2000 offers precise control of feeds and thread pitches without the need for change gears or gearboxes. The intuitive controls allow you to conveniently select feeds and thread pitches via rotary switches. Standard features such as a 3-axis position display and quick-change tool post further increase productivity. KNUTH machines are renowned for their high repeat accuracy and stability. You will appreciate the flexibility and the excellent surface finish, comparable to that of CNC lathes. Experience the benefits of the Servoturn 500/2000 and place your order today! Iasdpfx Afol Iy Sxs Tjl