Stroj za zavezovanje trakov

Brueninghaus SK-H315

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, 2 rabljena strojčka za povezovanje Brüninghaus SK-H 315, idealna za vezanje letvic. Skoraj nerabljena, v zelo dobrem stanju. Velikost mize: 920 x 620 mm. Napetost: 220 / 50 V / Hz. Skupna priključna moč: 0,77 kW. Teža stroja pribl.: 100 kg. Mere D x Š x V: pribl. 0,92 x 0,62 x 0,80 m. Bljdpow I Duyofx Afqjr STROJ ZA POVEZOVANJE – polavtomatski za plastične povezovalne trakove (pribl. Ø 500 x 17 mm). Shranjevanje traku se nahaja v spodnji omari. Površina mize je kromirana. Z naslonom D x Š x V 345 x 80 x 20 mm, nastavitev pribl. 32 mm. Napetost se nastavlja preko kazalca na linearni lestvici. Stroj za povezovanje je mobilen in enostaven za premikanje (npr. pri spremenljivih dolžinah). 4 vrtljiva kolesca, od tega 2 z zavoro. Idealno npr. za vezanje letvic.

Leto izdelave: 2006, Stanje: rabljeno, Cross Stacker Gaemmerler KL 540 with integrated Interlocking Device VM 500 The KL 540 cross stacker operates with the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and fully functional Technical Data: Cycle time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo pusher (depending on product) Number of pages: 4 – 96 (heatset / gravure printing) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal pusher) B: 140 – 500 mm D: max. 560 mm Layer height: max. 200 mm Stack height: max. 300 mm Weight: approx. 1,500 kg Interlocking Device Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and an interlocking time of 2 sec. The cycle time per package increases if the interlocking time is extended or the package height is reduced. The cycle time is also significantly influenced by the discharge speed of the cross stacker and thus by the product (surface, format). Formats: Width: 140 to 500 mm (5.5" to 19.7") Length: 105 to 330 mm (4.13" to 13") Stack height: 55 to 400 mm (2.16" to 15.7") Infeed height: 890 mm (35") Discharge height: 890 mm (35") Connection rating: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air requirement: 1000 standard l/min, 6 bar; oil-free, dry air Bsdpfxsh Nrh Uj Afqslr Weight: approx. 500 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH TYP SRM 2026 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> New machines ordered by the end of this year are currently available at special conditions! ==> Additionally, a fully refurbished used machine will soon be available. Please inquire separately regarding this option. ==> ==> Information for manufacturing companies or dealers with in-house production: Drawings, rights, spare parts, customer and prospect databases, as well as planning and production documents (including designs for a 9-ton pulling force variant) for the broaching machine can be purchased from us if needed. Please contact us if interested. ==> Our new machines are manufactured to order. Short-term production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special needles for internal spline broaching, etc.) and accessories are available. Please inquire separately regarding these. All broaching tools and tool holders from other manufacturers can be used on our broaching machine! Complete manufacturing and assembly at our plant in Germany. Short-term delivery available by arrangement. Furthermore, we offer spare and wear parts (spindles, spindle nuts, motors, gears, as well as all required components, including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The main application is for manufacturing keyway slots from 3–28 mm and profiles of similar sizes. The compact design requires minimum floor space and allows successful use in small, medium, and large workshops. The low price makes it economical even for small batches and single-piece production. Drive is provided by a pole-changeable geared brake motor. The maintenance-free dual spindle drive ensures smooth operation, a central pulling point, and consistent cutting performance. The open tool table design also allows large workpieces to be positioned without restriction. In most cases, workpieces do not require clamping. Stroke adjustment is accomplished via adjustable limit switches with stroke limiting. For short hubs/workpieces, multiple parts can be stacked for machining. Broaching needles, mandrels, and spare parts are available at attractive rates upon request. Technical Data: - Pulling force: 60 kN at 3 m/min, 40 kN at 6 m/min - Broaching speed: 3 m/min and 6 m/min (Optional: Stepless speed adjustment available from 0 to 6 m/min with extended electronics) - Return speed: 6 m/min - Stroke: 1050 mm - Broaching tool length: 1200 mm - Workpiece diameter: unlimited - Work table: 450 x 350 mm - Table opening: 140 mm - Weight: approx. 510 kg - Floor footprint: 750 x 570 mm - Overall height: 1510 mm - Drive power: 3.7 / 4.4 kW - Electrical equipment: 400 / 230 Volt 50 Hz - Control voltage: 230 Volt - Operating voltage: 400 Volt 50 Hz - Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 or custom - Safety door: Standard equipment - Coolant system: Standard equipment Blsdeuqbnhjpfx Afqsr The machine complies with the current Machinery Directive and carries CE marking.

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Bjdpfx Ajv Ifxisfqelr Year of manufacture: 2000, Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,

Stanje: delavnici obnovljeno (rabljeno), Overall length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm Blsdor Ezyxepfx Afqor

Stanje: dober (rabljeno), Leto izdelave: 2006, Compact and fast strapping machine with maximum package dimensions of approximately width 600 x height 600 mm from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and simple spool change and threading system. - Sealing type: heat-sealing using heater blade technology. - Up to approx. 42 strapping cycles per minute. - Strap type: PP strap. - Adjustable strap width 5–9 mm (set to 5 mm). - Strap tension adjustable via control terminal. - Soft tension available. - Standby function / energy-saving mode. - Sturdy foot pedal. - Low-maintenance and low-wear strap frame. - Equipped with castors for mobility and lockable wheels. Bledpfx Afspuy Itjqer The machine can be demonstrated under power.

Stanje: dober (rabljeno), Leto izdelave: 2006,

Leto izdelave: 2010, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: MBUT134WSK, Technical data: 1x Demag KBK 1 wall-mounted slewing crane, SWL 125 kg with chain hoist Safe working load at maximum outreach: 125 kg / 0.125 t Outreach: approx. 2 m Bsdjpwgr Hepfx Afqslr Total weight: approx. 150 kg Including steel chain hoist for 125 kg Includes pins, cable trolley, travelling gear, end cap etc. ----- Alternatively, 3m cranes with 125 kg or 250 kg safe working load are available Slewing range: 300°, 400V 16A connection Crane is dismantled and available immediately Item location: 75053 Gondelsheim More cranes available, SWL 80–5000 kg, please inquire See images (sample photo) Shipping by freight carrier or collection only by appointment

Stanje: zelo dobro (rabljeno), 4 units Year of manufacture: 2006/2004/2003/2002 Strap width: 5 mm, 9 mm, or 12 mm Strap tension: Steplessly adjustable, gentle tension available for delicate items Maximum package size: 600 x 600 mm (width x height) Sealing system: Heat-seal welding Blodev Sq Rropfx Afqer Table height: Approx. 820–925 mm Minimum package height: Approx. 10 mm Maximum package weight: Approx. 25 kg Strapping material: Polypropylene (PP) Power connection: 230 V

Stanje: rabljeno, Leto izdelave: 1994, Edging machine / double edger with automatic measurement and adjustment EWD Esterer Blodpswdux Aefx Afqor Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 2-blade, variable Combimes measuring system with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator new saw shaft, new bearings and new chains installed 3 years ago. Already dismantled and ready for loading at any time Location: Austria, near Leoben