Stroj za naknadno oblikovanje v cikličnem načinu

Brandt PF 20/31

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives Lodpfxehuthye Aamohi immediately ready for operation

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Ljdpfsi E Trpex Aamjhi

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 Lhodpfx Aajilqvrsmei The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required Lhjdpfxjbxz S Hs Aamsi The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: Lhodpew A A E Ijfx Aamsi 1+1 saw units 1+1 milling units 1+1 drilling units Maximum length: 2500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, obratovalne ure: 1.227 h, skupna masa: 4.800 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 1.000 l, barva: siv, moč: 280 kW (380,69 KM), Izhodni tok: 504 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 280 kW (380,69 KM), nazivna (navidezna) moč: 350 kVA, skupna dolžina: 4.500 mm, skupna širina: 1.600 mm, skupna višina: 2.200 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Iveco, vrsta hlajenja: voda, Naprodaj imamo rabljeni agregat za zasilno napajanje oziroma zamenjavo omrežja z naslednjimi tehničnimi podatki: Stanje: Rabljeno, popolnoma delujoče, preizkušeno Motor: MTU 12V396 (ladje, lokomotive, tanki, industrijski agregati) Nazivna moč: 1250 KVA / 1.000 kW Hitrost vrtenja: 1500 vrt/min Frekvenca: 50 Hz Nazivna napetost: 231/400 V Ledpet Agwxefx Aamehi Obratovalne ure: pribl. 287 h (delovanje v sili) - Vključno z baterijami - Vključno z rezervoarjem za dizel - Vključno z odklopnikom - Vključno z novo krmilno enoto (delovanje v otočnem režimu) - Vključno z motornim hladilnikom - Po želji za doplačilo krmilna enota tudi za sinhronizirano paralelno obratovanje z razdeljevanjem obremenitve in zasilnim napajanjem. Brezšamna integracija v vaš energetski sistem. Dimenzije: 500x180x200 cm (D׊×V) Teža: 8.500 kg Agregat se dobavi v delujočem stanju, vključno s protokoliranim 60-minutnim testom obremenitve. Na zahtevo je agregat mogoče montirati tudi v zvočno izoliranem 30-ft kontejnerju kot kompaktna vse-v-enem rešitev. Dostava, namestitev in zagon proti doplačilu možni. Cene brez DDV: - 58.000 € kos brez kontejnerja - 69.000 € kos z vključenim kontejnerjem Dodatna ponudba na

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) Ledpfxeh Ek Dae Aamohi - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Ljdpfx Aaog D Ugkemshi Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: rabljeno, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Lhedshik Ezspfx Aamei Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Thread cutting: up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical movement of milling head: 580 mm Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Clamping table area: 1570 x 500 mm Distance spindle nose – table: 130 - 720 mm Reach spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total power requirement: 20 kW Mains connection: 400 Volt, 50 Hz - HEIDENHAIN TNC 155 CNC control with TFT monitor - 3-axis control, X, Y, and Z (quill movement) - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of the milling head with cutoff via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool holder with 21 tool positions - Coolant system integrated in the machine base - Electrical cabinet mounted to the machine - Documentation: operating instructions, control manual and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Point-to-point CNC drilling machine MASTERWOOD SPEEDY 207 used machine for custom furniture production, kitchen furniture, bathroom furniture, and various applications Drilling unit with 5 independent vertical spindles and 1 double horizontal spindle Saw for longitudinal cuts Machine table with a drilling capacity of 1390 x 750 mm and two lateral pop-up stops, electronically controlled, allowing the machining of panels up to 2800 x 750 mm in size with a single program and intermediate stop Capability for drilling panels up to 2800 mm Pneumatic tool shift: 60 mm Max. panel thickness: 50 mm Spindle speed: 4,500 rpm Ledewd Irvopfx Aamohi Saw rotation speed: 6,000 rpm Vacuum pump motor: 1.5 HP Suction cup diameter: 80 mm Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control system complete with interactive graphic programming, 9" video display, drilling programs, work cycle optimization, as well as graphic, parametric, and diagnostic modes Overall dimensions – Machine: 2500 x 1800 x 1800 mm (H), weight: 850 kg Overall dimensions – Control panel: 800 x 520 x 1200 mm, weight: 120 kg