Stroj za zarezovanje

BOSCHERT K90-E200

Stanje: rabljeno, Dolžina upogibanja: 3100 mm Tlak: 80 t Kdsdpfxeru Unbe Af Teg Moč motorja: 5,5 kW Mehanska zadnja opora

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, potovalna razdalja osi X: 4.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 2.066 obr/min, širina mize: 1.000 mm, dolžina mize: 6.100 mm, skupna masa: 19.000 kg, 3-axis Newall digital readout, feed drives with variable speed controller SA 50 head, spindle speeds infinitely variable up to a maximum of 1500 rpm Table: 6100 x 1000 mm Travel: 4500 x 1000 x 1000 mm Kjdpfxsvz Aydo Af Todg Weight: 19 tonnes

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Kjdpfjg Ip Efsx Af Todg Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive combined with linear direct drives - Enclosed beam guidance via fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit with fully adaptive lens system - Single-cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: Height control and sheet metal edge detection Control - Advanced shop floor programming (TruTops via network access) - Fast reproduction - 17" touch color display - Integrated technology data - Automatic shutdown - Programmable cutting gas/-pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Tele-service via internet - Integrated e-shop Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special equipment: • 3001 on TruDisk 4001 • Extended pallet drawer • Dust protection cover plate • Viewing window left Kjdexw Uryopfx Af Tjdg • Viewing windows right side • Storage interface • BrightLine Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Stanje: novo, Leto izdelave: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with variable spindle speed. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. Typically used in small industrial workshops, repair shops, garages, etc. This machine version is supplied without a base. The universal TYTAN 750 PRO lathe, thanks to its infinitely variable spindle speed adjustment, is an ergonomic machine that meets user demands. Reduced setup time when processing parts of different sizes translates into improved efficiency and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via DC motor and voltage regulator. This ensures optimal rotational accuracy of the lathe chuck, resulting in high-quality machining of workpieces. Key advantages: - Modern DC motor with infinitely variable spindle speed ensures convenience and reduces calibration times. - LCD screen with spindle speed display allows control and quick adjustment of spindle speed during setting of cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels, and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2-3.5 mm); imperial – 21 pitches (8-56 TPI). Left- and right-handed thread cutting available. - Automatic longitudinal feed with 6 speed settings (0.07 to 0.40 mm/rev) – significantly reduces processing time without compromising machining quality, especially for long parts. - Fully compliant with EU (CE) directives as well as Polish and DIN standards. Technical specifications: - 3-jaw chuck: 125 mm - Max turning diameter over bed: 250 mm - Turning diameter over cross slide: 150 mm - Turning length between centers: 750 mm - Max workpiece length (chuck/center): 700 mm Kedpfxjvvlxls Af Tsdg - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Max tool size: 12 x 12 mm - Compound rest travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed regulation: stepless (L/H) - Spindle speeds: L: 50–1125 rpm / H: 100–2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 TPI - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.900 mm, skupna širina: 2.900 mm, skupna dolžina: 8.000 mm, proizvajalec krmilnikov: Heidenhain, lastna masa: 13.000 kg, Type: TMML6-centrum Maximale afstand van kolom tot spilcentrum: 1210 mm (kiel-diepte) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of vervangen door een T-groef vloerplaat voor het bewerken van hogere werkstukken Kedpfxjv St Efe Af Tsdg Langsverplaatsing X-as: 3023 mm Dwarsverplaatsing Y-as: 800 mm Vertikale slag Z-as (hoogte): 1528 mm Klemoppervlakte tafel: 4200 x 1000 mm Maximale werkstukhoogte: 2000 mm Spilvermogen: 20 kW Opname in freeshoofdspil (ISO): ISO 50 Toerentalbereik: 50 - 1980 omw/min

Stanje: novo, Leto izdelave: 2025, PROD-MASZ is a machine manufacturer introducing a completely new level of equipment quality. We take personal responsibility for every stage of production for the products we offer, ensuring the highest standards and workmanship quality. Our many years of experience allow us to develop durable, reliable, and user-friendly machines. We place particular emphasis on functionality, user comfort, and work ergonomics, thanks to which we are a leader in both domestic and international markets. Those who know us, know we are a dependable company :) BOX AND PAN BRAKE 2.14 m / 1.2 mm Technical Specifications: - Maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (mild steel sheet) - Maximum bending angle: 145 degrees - Bending beam thickness: 24 mm - Upper beam lift in three positions - Gas springs - Clearance: 80 mm - Degree scale Angle stop Rear sheet support tray Front depth stops - Approximate weight: 290 kg - The machine is CE compliant and comes with a 12-month warranty. Rotary shear 0.8 mm available for an additional 350 euros Kdjdpfecntllex Af Teg Price: €1,550 Shipping cost: €180 within Germany Delivery – every week Cash on delivery We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community delivery or with 19% VAT added, as applicable.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, skupna masa: 22.800 kg, stiskalna sila: 250 t, CNC Press Brake Manufacturer: Weinbrenner Kdedpfer Sxq Rox Af Tjg Model: GP250 Machine Specifications: - Crowning system - Die shifting - Back gauge, Type 2 - Front bending aid (disassembled for transport) - DNC 900PS control system All documentation for the machine is available.

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Kodpfsiknv Ejx Af Tsdg

Leto izdelave: 2007, Stanje: dober (rabljeno), Rabljeni Bystronic Byspeed CNC laserski stroj 4,4 kW naprodaj Rabljeni Bystronic laserski stroji 4,4 kW naprodaj VIDEO SPODAJ: Byspeed 3015 4,4 kW Leto izdelave/namestitve: 2007 Proizvajalec: Bystronic Model: Byspeed 3015 Velikost pločevine: 3 metre x 1,5 metra / 3000 mm x 1500 mm Moč laserja: 4,4 kW / 4400 W Krmiljenje: ByVision CNC02 Avtomatizacija: ni na voljo Leto: 2007 Stanje: dobro delujoče, servisirano od novega Kdjdpfsgwa Swox Af Tsg Byspeed 3015 4400 W Marec 2010 Obratovalne ure: 44.189 h Ure rezanja: 20.490 h Stroj je v dobrem stanju, ves čas pod rednim servisom Bystronic UK. Vključene možnosti: Bypos avtomatsko ostrenje CutControl 2 rezalni glavi Orodja in dodatna oprema Torit odsesovalec prahu Dostava, montaža in usposabljanje možni z doplačilom.