Stroj za obrobljanje in obrobljanje

BOLUK BKS 4

Stanje: novo, najv. debelina jeklene pločevine: 4 mm, - Capacity 4 mm Ihjdpfx Asgg Nq Hof Tjt - Hydraulic roll adjustment - Foot switch - Brake motor - With 4 sets of rolls - Emergency stop - 400V

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams Ihodpfx Aodzqbljf Tot For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: novo, Fastech 3-Roll Plate Bending Machine FRS 2050 x 140 Technical specifications: Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Motorized lower roll adjustment Iodpfxohzq D Ho Af Teht • 2 x digital readout Sheet width: 2050 mm Sheet thickness: max. 4.5 mm Pre-bending thickness: 4.0 mm Roll length: 2050 mm Roll diameter: 140 mm Minimum bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: • Electrically driven top and bottom rolls • Swing-out top roll • Conical bending device • Asymmetric roll arrangement • Self-braking main motor • Separate control and operating panel • Safety cable • Values refer to St-37 / 240 N/mm² • CE mark

Stanje: novo, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Iedpfx Ajhzq Dqef Teht Sheet width: 1250 mm Sheet thickness max.: 3.0 mm Sheet pre-bending thickness: 2.5 mm Roll length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (LxWxH): 1950 x 900 x 1130 mm Motor: 1.1 kW Features: - Electrically driven upper and lower rollers - Swiveling upper roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope All values based on St-37 / 240 N/mm² CE-marked

Leto izdelave: 2021, Stanje: novo, - Capacity: 1070 x 2 mm - Conical rolling - Removable top roll - Foot control - Emergency stop - Documentation Iedpfxjhc Uvms Af Tjht - 400V

Stanje: novo, Sheet thickness 1.2 mm Roller diameter 62 mm Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Ihedpjfv H Edjfx Af Tjt Space requirement approx. 1.1 x 0.5 x 1.3 m Machine is equipped with: - Emergency stop switch - Foot pedal - 7 sets of rollers

Leto izdelave: 2008, Stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm Ihjdpfx Asmidyiof Tjt - Punching Unit – Punching force: 600 kN – with stop table – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Stanje: rabljeno, Druck: 250 t Hubweg: 120 mm Tischgröße unten: 1.600 x 1.600 mm NEUE HYDRAULIK- UND ELEKTRIKSYSTEME Ihodpfxe Du U Ds Af Tst

Stanje: rabljeno, Druck: 200 t Tischabmessungen unten: 1.250 x 1.500 mm Technische Merkmale: GEGENDRUCK Ihedpfx Ao Du Umjf Tot NEUE ELEKTRIK UND HYDRAULIKANLAGE

Stanje: novo, Sheet width: 1270 mm Sheet thickness: 2.0 mm Frame width: 1300 mm Opening width: 48 mm Ihedpfx Afjupxcgs Tjt Max. bending angle: 135° Total power requirement: manually operated Machine weight: approx. 0.4 t Space required: approx. 1.6 x 0.9 x 1.2 m Segmented bending machine Segment widths: 25, 35, 40, 50, 75, 100, 125, 150, 250 mm.