Hladilnik

Bitzer CSH 8571-110Y (X2)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 800 kW (1.087,70 KM), skupna masa: 4.500 kg, Oprema: kompresor, zamrzovalnik, Chiller Trane RTUB224 Cooling capacity: 800 kW Fedporzq Arjfx Abrjpn Number of refrigeration circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers: 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C and a condensing temperature of +40°C.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Fedjvllxdopfx Abrjpn Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: nepreverjeno (rabljeno), Various refrigeration units and condensers from a bottling plant, dismantled, for sale, including: Fodpfx Aoh Nq E Sebrjpn 10 refrigeration systems, manufacturer Hafner + Muschler, complete on frame, each with 2 compressors, including electrical and control cabinets, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of manufacture 2002 - 2008, dimensions approx. 3,100 mm x 1,600 mm each 3 condensers, manufacturer Thermofin, each with 4 fans, years of manufacture 2006 / 2008 / 2016, dimensions: 4,200 mm x 2,300 mm each 4 condensers, manufacturer Güntner, each with 8 fans (890 rpm), 246.7 l volume, 32 bar, years of manufacture 2002 / 2016, dimensions: 6,150 mm x 2,300 mm 2 condensers, manufacturer Güntner, each with 6 fans, 93 l volume, 28 bar, year of manufacture 2002, dimensions: 6,050 mm x 2,400 mm

Stanje: rabljeno, Vertical multistage high-pressure centrifugal pump GRUNDFOS Like-new pump, but a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - Pump design in 9 stages - Made from stainless steel 1.4401 - The nearly new pump has been used as a parts donor, but several new pump chambers are included - A part of the magnetic coupling is missing Fodpfx Abofupadjropn Suitable for potable water supply, irrigation, and dewatering Packed in the original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Total weight with shipping crate: 85 kg Condition: As new Not a submersible or immersion pump

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400 Fodpfx Abeud H Dmsrjpn  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: pripravljen za uporabo (rabljen), Guntner Cooler Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spacing: 7 mm Space for electric heaters Number of fans: 2 x 660 mm RPM: 870/650 Unit dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Capacity: 54.8 L Weight: 275 kg Stock status: 4 units available Inventory number: CH259 Condition: used Fjdpfx Ajhz T Igebrspn We have many other refrigeration units in stock. Refrigeration aggregates, compressors, coolers, condensers, chillers, cold rooms, as well as refrigerated and catering furniture, and machines and equipment for restaurants and meat processing. See our other listings or call us – not all items are listed on Machineseeker.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Na prodaj sta 2 industrijska agregatna hladilna sistema v robustni izvedbi, opremljena z več batnimi kompresorji Bitzer. Napravi sta iz delujočega obrata in strokovno demontirani. Idealna rešitev za nadaljnjo uporabo, predelavo ali izvoz. Obseg dobave: Fodpfsyxvqcjx Abrjpn - Popoln agregatni hladilni sistem - Vgrajeni kompresorji Bitzer - Razdelilna omara/krmiljenje Stanje: - Rabljeno - Demontirano iz delujočega obrata - Sledi uporabe zaradi starosti - Prodaja brez garancije

Stanje: skoraj kot novo (rabljeno), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Fsdpfx Abjfz D Dnjropn Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Leto izdelave: 2008, stanje: rabljeno, York screw compressor with motor and flange Refrigerant: R134A Can also be used for R717 Motor: 165 kW / 3000 rpm Y400V/50Hz Fpedpfx Ascrqmrobrsn

Leto izdelave: 2018, stanje: dober (rabljeno), Multivac L310 Transportband-Etikettierer Die Transportband-Etikettierer der L 310-Serie bieten höchste Flexibilität und Präzision beim Etikettieren einer Vielzahl von Verpackungen, wie Becher, Dosen, Faltschachteln, Schlauchbeutel, tiefgezogene Verpackungen oder Trays. Sie verfügen über einen modularen Aufbau und können dank zahlreicher Optionen zum Etikettieren, Drucken und Inspizieren individuell an komplexe Aufgabenstellungen angepasst werden. Mit einer Transportbandgeschwindigkeit von bis zu 90 m/min und einer Etikettiergeschwindigkeit von bis zu 120 m/min erfüllen sie auch höchste Leistungsanforderungen. Der L 310 Transportband-Etikettierer ist zudem in einer Hygienic-Design-Variante für besonders hygiene-sensible Bereiche wie Lifescience- und Healthcare-Produkte erhältlich. Vorteile: - Vielfältige Optionen zur Durchführung unterschiedlicher Aufgaben, inklusive Drucken und Inspektion - Maximale Etikettiergeschwindigkeit und Genauigkeit durch Servotechnologie - Einfache Bedienung dank grafischem HMI 2.0 oder MC 08/MC 10 Benutzeroberfläche - Reduzierte Stillstandszeiten durch einfachen und schnellen Rollenwechsel - Werkzeugloser Wechsel des Transportbands - Durchgängiges Hygienic Design Hersteller: Multivac Modell: L 310 Baujahr: 2018 Leistung: bis zu 120 Packungen/min Etikettierbreite: bis zu 500 mm Etikettieranbringung: Unter- und Oberseite Bandbreite: 290 mm Fjdpfx Abjyffnperspn Maschinenabmessungen (LxBxH): 1.750 x 1.050 x 1.900 mm Maschinengewicht: 200 kg