Valjčni transporter Valjčni transporter

Bito / Segmentlänge: 2.460 mm Segmentbreite: 38 mm

Stanje: rabljeno,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive via gear motor, system housing made of stainless steel 1.4301, pipelines and rotating basket made of galvanized steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control as dry-run protection. - Basket diameter: 780 mm - Usable height: 500 mm Klsdpfx Asuxuv Asbxou - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 120 liters - Heating: electrically adjustable (RT - 60°C) - Machine dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm - Suction filter for pump protection Delivery: ex works, FCA

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Kjdotzld Uepfx Abxolu

Stanje: novo, Leto izdelave: 2026, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive via gear motor, system housing made of stainless steel 1.4301, pipelines and rotating basket made of galvanized steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control as dry-run protection. Kjdpfx Abehl H Ubsxolu - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 120 liters - Heating: electrically adjustable (RT - 60°C) - Machine dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm - Suction filter for pump protection Delivery: ex works, FCA

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 116387, višina skobljanja: 160 mm, širina skobljanja: 260 mm, skupna širina: 145 mm, skupna višina: 170 mm, skupna dolžina: 375 mm, teža obdelovanca (maks.): 2.100 kg, višina obdelovanca (maks.): 160 mm, priključek za stisnjen zrak: 8 letvica, vrsta vhodnega toka: trifazni, širina obdelovanca (maks.): 260 mm, vhodna napetost: 400 V, dolžina mize: 2.500 mm, število vreten: 4, premer povezave za izpihovanje: 250 mm, moč: 18 kW (24,47 KM), vhodna frekvenca: 50 Hz, vhodni tok: 63 A, Oprema: motorna zavora, Weinig Cube 4-seitige Hobelmaschine zu verkaufen. Wird verkauft, weil sie in unserer Werkstatt kaum genutzt wurde. Kommt von De Groot Bewerkingsmachines und wurde dort auch immer gewartet. Funktioniert einwandfrei. Die Maschine ist aktuell bereits abgeklemmt und verpackt, kann aber bei ernsthaftem Interesse im Betrieb vorgeführt werden. Baujahr: 2011 Gewicht: 2.100 kg Anschlusswert: 400V, 63A Arbeitsluftdruck: 8 bar Leistung: 18 kW (25 PS) Absauganschluss: 250 mm (1x) Maximale Hobelbreite: 260 mm Maximale Hobelhöhe: 160 mm Minimale Hobellänge: ca. 400 mm Vorschubtischlänge: 2.500 mm Alle Werte über Touchscreen einstellbar Sichtbare Abnahmeanzeige mittels Laserlinien Gesamtlänge der Maschine: 375 cm Gesamtbreite der Maschine: 145 cm Gesamthöhe der Maschine: 170 cm Inkl. Hobelköpfe mit Messern. Kljdpsxhcizsfx Abxju Es handelt sich um eine hochwertige Maschine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Kedpfx Aoh Ek Dasbxolu Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 Kedefzzhyjpfx Abxslu - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: rabljeno,

Leto izdelave: 2026, stanje: novo, Fully automatic orbital stretch wrapper packaging machine SPINNER 1500s + BN Application: Packaging, grouping and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - Pass-through direction right General technical data: - Main motor power: 2.2 kW - Max. ring speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard equipment: - Powered conveyor (infeed and outfeed) for automatic product feed - Adjustable ring speed - Adjustable stretch tension with a mechanical brake device - Automatic stretch film clamping and cutting system - Automatic stretch hook system - Pneumatic front and rear presses that hold the product from above during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for adapting machine parameters to product requirements - Operator safety systems Optional equipment: - Various types of conveyors - Infeed and outfeed rollers - Air bubble film unit (included in this offer) Technical features: Wrapping dimensions: - Max. length: unlimited - Min. size (W x H x L): 100 x 18 x 550 mm Conveyor specifications: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec Klodpfofuwrcox Abxou - Load capacity: 150 kg/m Stretch film specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns Air bubble film unit: - Max. film width: 1,350 mm - Max. film roll diameter: 700 mm - Core diameter: 20 ~ 76 mm - Suitable film materials: PW film, PE bubble film, PVC film - Cutting and welding system: operating temperature 50°C ~ 150°C

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Key Features: * CNC multi-side machining * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. Ksdpfx Asx Nqqxsbxelu The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026