CNC stružno-rezkalni center

Biglia B.750-YS

Stanje: dober (rabljeno), Leto izdelave: 2013, Premer struženja 376 mm, dolžina struženja 760 mm, prehod palice 76 mm, os Y -/+ 52,5 mm, os C 0,001 stopinje na obeh vretenih, revolverska glava z 12 postajami, motor 22 kW, glavno vreteno 4000 vrt/min, pomožno vreteno 4500 vrt/min, trivrha vpenjala, transporter odrezkov, merilna postaja za orodje, avtomatski podajalnik palic z magazinom. Bsdpexv Svmofx Ah Aect

Stanje: rabljeno, Leto izdelave: 2014, CNC turning and milling center (9-axis) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) ATC tool magazine Number of tool pockets: 40 Tool holder: CAPTO C6 Lower tool turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Toolholder type: BMT 55P Motor power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Part unloading with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water supply through turret - Compact filter system Knoll Bjdpox Hy R Njfx Ah Aoct - Automatic workpiece measurement

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. Bcedpfoxmhdnox Ah Ajt A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN LYNX 2100LYA Leto izdelave: 2020 FANUC upravljalnik na dotik Specifikacije: Bodjx Id D Aepfx Ah Ajct Maks. hitrost vretena: 6000 obr/min Maks. dolžina struženja: 510 mm Maks. premer palice: 51 mm Maks. premer struženja: 300 mm Os Y: 105 (±52,5) Os C: 360 Glava: BMT45P 24 pozicij - Programabilna konica - Merilna sonda za orodje - Odmetalnik ostružkov LNS - Pogonski držala za orodja 4 kosa (2/2) - Navadni držala 6 kosov Število delovnih ur: 3177 ur

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G3169-0110, stružna dolžina: 530 mm, premer struženja: 420 mm, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 220 mm, pomik osi Y: 80 mm, pomik po osi Z: 550 mm, skupna masa: 4.700 kg, premer struženja nad ležiščem sani: 800 mm, HYUNDAI WIA L200SY CNC STRUŽNICA CENTER Leto: 2012 | CNC upravljanje Fanuc 18i-TB Serijska št.: G3169-0110 • 5-osni CNC stružni center – Hyundai WIA L200SY • Glavni vpenjalni tulec: 8″ | Pomožno vreteno: 5″ • Pogonjeno orodje in Y-os + indeksiranje C-osi • Max. premer struženja: ca. 419–420 mm / 16,5″ • Max. dolžina struženja: ca. 520–530 mm / ~20,5–20,9″ • Premer nad posteljo: ca. 800 mm / 31,5″ • X-hod: ca. 220 mm / 8,7″ • Z-hod: ca. 550 mm / 21,7″ • Y-hod: ca. 80 mm / 3,1″ • Max. hitrost glavnega vretena: do 4.000 obr/min • Moč glavnega vretena: ca. 20 KM (~15 kW) • Hitrost pomožnega vretena do 6.000 obr/min • Indeksiranje C-osi: možno do 0,001° • Orodne postaje: ca. 12 Bsdpfxjx I A Hcs Ah Ajct • Vključen hladilni sistem in transporter ostružkov • Approx. dimenzije: 120″ × 68″ × 80″ • Približna teža: ~10.500 lbs (~4.760 kg) OPOMBA: STROJ JE BIL ODSTRANJEN IZ DOBREGA OBRATOVALNEGA STANJA PRED 2 LETOMA. PREDVIDENA JE BILA PONOVNA UPORABA, VENDAR PRODAVALEC NE BO VEČ OPRAVLJAL OBDELOVALNIH DEL.

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Fanuc, model krmilnika: 31i-Model A, Description: General: Year of manufacture: 2011 Control: Fanuc 31i-Model A Turning diameter: 255 mm Turning length: approx. 640 mm Bar capacity: 52 mm Main spindle: Technology: Belt-driven spindle Speed: 5,000 rpm Power: 15 kW Torque: 115 Nm C-axis: 0.001° Bar capacity: 52 mm Chuck: Hainbuch Spanntop Sub spindle: Technology: Belt-driven spindle Speed: 5,000 rpm Power: 7.5 kW Torque: 86 Nm C-axis: 0.001° Bar capacity: 52 mm Chuck: Hainbuch Spanntop Tool turret I (X/Y/Z): Technology: Tool turret Number of stations: 12 pcs. Tool holder: BMT Driven tools: 6,000 rpm, 52 Nm X-axis: 190 mm Y-axis: 80 (+/- 40) mm Z-axis: 300 mm Tool turret II (X/Y/Z): Technology: Tool turret Number of stations: 12 pcs. Tool holder: BMT Driven tools: 6,000 rpm, 52 Nm X-axis: 190 mm Bjdpfxoxy Ubys Ah Asct Y-axis: 80 (+/- 40) mm Z-axis: 635 mm Tool turret III (X/Y/Z): Technology: Tool turret Number of stations: 12 pcs. Tool holder: BMT Driven tools: 6,000 rpm, 52 Nm X-axis: 190 mm Y-axis: 80 (+/- 40) mm Z-axis: 500 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ unit) Bar feeder: Irco Breuning SiMag 70.1 - 3000 Parts removal: Parts gripper + transfer belt Setup operation: Electronic handwheel Chuck: 2x Hainbuch Spanntop Tool holders: Various driven and static tool holders

Leto izdelave: 2023, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 7100 kg Višina stroja: 2120 mm Mere Dolžina stroja: 2542 mm Glavni pogon Število osi: 3 Hitrost vretena: 4000 min⁻¹ Bedpfjx H U Dwjx Ah Aect Moč vretenskega motorja: 15 kW Pomiki Pomik po osi X: 230 mm Pomik po osi Z: 640 mm Ta 3-osni horizontalni stružni stroj CMZ TA-20TY-640 je bil izdelan leta 2023. Omogoča največji premer struženja 460 mm, dolžino 640 mm in ima robustno vreteno z močjo 15 kW ter hitrostjo do 4000 min⁻¹. Vključuje pomik po Y-osi +70/-50 mm, 15 gnanih orodij z največjo hitrostjo do 12.000 min⁻¹ in prehodno odprtino za palice 66 mm. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja CMZ TA-20TY-640. Za več informacij o stroju nas kontaktirajte. Vrsta uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja: 300 mm, potovalna razdalja osi X: 215 mm, pomik osi Y: 110 mm, pomik po osi Z: 680 mm, prehod palice: 81 mm, Os C + os Y 2+2 gnana orodja Bcjdpfx Asx Hpnksh Aet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD display/operator panel 1 Drive motors for X/Z axes and spindle, GE Fanuc make, in digital AC technology; travel distances X=200mm, Z=515mm Bcedpfx Asx N H Rboh Ast Main spindle up to 5,000 rpm / 52mm bar capacity; power 18kW; torque 113Nm (S6=40%) Main spindle as integrated motor spindle with water cooling, spindle nose A6 C-axis for spindle including software option "Transmit" for face machining and "cylindrical interpolation" for peripheral machining Hydraulic hollow chuck cylinder 12-position turret for tool holders according to DIN 69880/30mm 12 driven tool stations with turret for milling and drilling operations Tailstock for TC400, Morse taper MK4 Chip conveyor TC400, with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump 50 l/min, 3.3 bar Parts catcher, tool measuring arm, high-pressure pump, electrostatic air cleaner

Stanje: rabljeno, Leto izdelave: 2014, Fanuc i-serije upravljanje Premer vrtenja: 320 mm Dolžina struženja: 305 mm Premer vrtenja nad posteljo: 510 mm Premer vrtenja nad prečnim suportom: 290 mm X-os: 175 mm Z-os: 330 mm Število obratov: 6.000 vrt/min Vrtina vretena: 53,3 mm Število orodij: 12 kos Obratovalne ure: ca. 39.183 h Ure vretena: ca. 8.379 h Po našem mnenju je stroj v dobrem rabljenem stanju in si ga je možno po predhodnem dogovoru ogledati pod napetostjo. Bcsdpjx Ik Syefx Ah Aot Tehnične lastnosti in oprema: - Transporter za odrezke - Pogonska orodja Dodatna oprema, prikazana orodja in vpenjalne naprave so del dobave samo, če so navedeni v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!