Pločevinasta žaga

BIESSE EB75

Stanje: rabljeno, številka stroja/vozila: 007913, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA, vroč zrak Spojno rezkanje: da Multifunkcijska enota: da Maksimalna debelina plošče: 60 mm Kwodpfewkf Dvox Adkjw Delovni agregati: 7 št.

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Kodpfx Adsgtm U Askeww Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis Ksdpfxjlht Hzj Adksww F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Kwsdsg Tu Rkepfx Adkjw Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: rabljeno, Leto izdelave: 2016, Vitap Eclipse Kantenanleimmaschine für runde, gebogene Werkstücke Halbautomatische Kantenanleimmaschine für große, runde oder gebogene Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Bandstärke von 1 bis 3 mm. Die Höhe von 60 mm ist nur bei einer Kantenbandstärke von 1 mm möglich. Bei stärkerem Kantenband hängt es von der Qualität des Bandes ab und muss in Verbindung mit dem Schneidaggregat vorab getestet werden. Kodpswgb Hxsfx Adksww Beschreibung: - Zwei Kopierrollen zur Abtastung der Werkstückkontur - Leimstation - Leimbecken mit 1 kg Fassungsvermögen - Zwei 800W-Heizelemente mit elektronischer Temperaturanzeige über die SPS - Leimauftragung durch Leimwalze - Leimbecken aus Aluminium zur optimalen Wärmeverteilung - Leimzufuhr per Knopfdruck regulierbar - Automatische Schereinheit für Kantenmaterial von der Rolle mit Breiten zwischen 3 und 45 mm - Aggregat wird über Sensor für geschlossene Kantenanleimung oder über Encoder bei einseitiger Bekantung gesteuert - Lasersystem für Längenermittlung, keine Vormessung notwendig - Zu-/Abschaltmöglichkeit für Durchlaufbetrieb - Höhenverstellbarer Tisch für schmale Paneele - Zu-/Abschaltmöglichkeit für das Fräsaggregat - Zwei Kopierrollen zur Abtastung der Werkstückgeometrie - Fräsaggregat ausgestattet mit 2 x 0,5 kW (15.000 U/min Hochfrequenz) und oberen, unteren sowie vorderen Kopierrollen - Fräsaggregat mit Messern R=2, Phase 15°, D=69, Z=6 - Großzügiger Plattenteller mit Vakuum zur Fixierung des Werkstücks (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Kjdpfx Aexranpsdkoww Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: novo, SCM Olimpic 500 HT – Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 – Version "HP T-ER2" - "eye-S" control console (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine milling and radius scraper unit, radius = 1 mm - Fine milling and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and gluing area - "Nesting" tracing rollers - Separator agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for delicate edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" Kedpfewkf Ihex Adkjww - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit: 3 automatic settings straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is new and still in its original packaging. Special offer demonstration machine at a discounted price.

Stanje: novo, Leto izdelave: 2023, skupna širina: 1.300 mm, skupna dolžina: 3.000 mm, stiskalna sila: 120 t, širina odpiranja: 400 mm, obratovalna temperatura: 120 °C, premer cilindra: 85 mm,

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Ksdpfeukhd Aox Adkeww No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: novo, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Edging length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Main motor output (S1 100%): 5.5 kW (7.5 HP) Main motor power consumption (S6 40%): 7.5 kW (10.0 HP) Scoring motor output: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Ksdpfx Adod N S T Dskjww Scope of delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre gauge • Eccentric clamp • Table widening • Extendable telescopic fence • Rip fence flaps • Support table with roller • Push stick • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double-roller carriage with central and end position locking for precise cuts • Maximum saw blade diameter of 400 mm for cutting heights up to 125 mm • Support table with roller for easy handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Equipped as standard with independently driven scoring unit (motor output 0.75 kW) • Robust saw unit with dual-sided, cast-iron guided swivelling elements • Table widening for cutting widths up to 1300 mm included • All aluminium parts (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously adjustable from 90° to 45°