Iztiskalnik z dvema vijakoma

Berstorff ZE (CL) 25/30 LD

Stanje: pripravljen za uporabo (rabljen), BESCHREIBUNG MERKMALE MATERIAL Kaltband, verzinkt DICKE 0,4–2,5 mm Dsdpfx Aevupmdefloul BAND-/COILBREITE 500–1.550 mm MAXIMALES COILGEWICHT FÜR DIE VERARBEITUNG 16 t INNENDURCHMESSER COIL 480–520 mm, 580–620 mm, 740–800 mm AUSSENDURCHMESSER COIL 1.600 mm INNENDURCHMESSER BANDSTREIFEN 508 mm TOLERANZ BREITE BANDSTREIFEN 0,1 mm MINIMALE STREIFENBREITE 20 mm MAXIMALE STREIFENBREITE 1.520 mm Anzahl der Schnitte / Streifenbreiten: 0,4–1 mm 20 Streifen 1,01–2 mm 10 Streifen 2,01–2,5 mm 8 Streifen MINIMALE BESCHNITTBREITE 8 mm (2×4 mm)

Stanje: rabljeno, številka stroja/vozila: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-knife rotor 4 rows of stator knives Feed opening approx. 250 x 600 mm Duodpfx Afoghgmzelsl Drive motor 37 kW

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Dodpfx Ajiyyndsfleul Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. Dodpfjua D Aljx Afloul ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: dober (rabljeno), Leto izdelave: 2011, Industrijski robot Proizvajalec: Kuka Tip: KR30L16-2 (SafeRobot) Leto izdelave: 2011 Doseg: 3102 mm Teža: 700 kg Nosilnost: 16 kg Krmilnik Kuka KRC2ed05 (SafeRobot) Teža: 185 kg Duodpfx Aen Uv S Aeflel Procesor: 2 GHz Sistem: WinXP Različica programske opreme: V5.6.6 Učni panel Kuka KCP2 Povezovalni kabli Kuka 7 m/15 m 101225ä

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Dsdoh Tk Rvjpfx Afloul Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Vecoplan VAZ 1300 Shredder Hopper inlet: 2.26 m x 1.65 m Dodpfx Aowu Nwhsfleul

Stanje: novo, Parallel lathe with Fervi T075/400V3A digital readout. Monobloc cast iron bed. Centre height: 230 mm Max. swing over bed: 460 mm Max. swing over carriage: 270 mm Max. swing in gap: 690 mm Tool height: 25 mm Distance between centres: 1500 mm Distance between guides: 300 mm Spindle bore taper: MT7 Spindle bore: 58 mm Spindle nose: Camlock D1-8 Spindle speeds (12): 25–1700 rpm Longitudinal feeds (42): 0.031–1.7 mm/rev Cross feeds (42): 0.014–0.784 mm/rev Metric threads (41): 0.1–14 mm Inch threads (60): 2–112 TPI Tailstock quill stroke: 130 mm Tailstock taper: MT4 Motor: 400 V 50 Hz 5.5 kW Coolant pump: 400 V 50 Hz 90 W Machine dimensions: 2750 x 1080 x 1370 mm Net weight: 2020 kg Total dimensions: 2870 x 1180 x 1570 mm Gross weight: 2200 kg Included accessories: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Faceplate Ø350 mm Fixed stead rest Travelling (follow) steady rest Reducing sleeve MT 7/4 Dusdpfjvbqv Hex Afljl Fixed tailstock centre MT 4 Rotating tailstock centre MT 4 Threading dial indicator Quick-change tool post guard Spindle guard Rear splash guard Type B quick-change tool post LED light Coolant system Electromechanical foot brake Carriage gears in oil bath Rapid-lock tailstock carriage

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 Duodpfx Afouxa Abslol s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch en senzor tlaka taline krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje ta ekstruder je bil funkcionalno preizkušen! Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Leto izdelave: 2024, obratovalne ure: 10 h, Stanje: skoraj kot novo (rabljeno), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without any issues. The stuffing unit reliably compacts the loose material and feeds it directly to the extruder. This ensures consistent material intake and stable extrusion, even with challenging input materials. Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and voluminous materials such as EPS or film regrind • Efficient material feed thanks to integrated stuffing unit • Compact design, easy to maintain - Feeding extruder / melt extruder Dodpfxjtziudo Aflsul - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (Suitable for low bulk density material) - Large filter / screen changer - Strand die adapted