Stebrni vrtalnik

BERNARDO B 610 PRO / 400 V - R/L

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Lodpfx Alomhhf Ss Nshf

Stanje: dober (rabljeno), Leto izdelave: 1988, številka stroja/vozila: 251500126, Offer 24156 Technical Specifications: - Drilling capacity in steel ST 60: 18 mm - Drill spindle taper: MT 2 - Drill spindle stroke: 100 mm - Drill spindle speeds approx.: 340 - 2400 rpm - Right- and left-hand rotation - Throat depth: 250 mm Lodpfx Alevxhdcj Njhf - Max. distance table to drill spindle: 670 mm - Table with 2 T-slots: 320 x 280 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.75 kW - Required space (approx.): W 500 x H 1750 x D 750 mm - Weight (approx.): 180 kg - Included: – Quick-action drill chuck

Stanje: novo, Drilling capacity in steel (diameter): 25.0 mm Throat depth: 180 mm Drilling stroke: 80.0 mm Morse taper: 2 MT Speed range: 180 - 2270 rpm Table size: 305 x 305 mm tiltable +/- 45 degrees T-slots: 16.0 mm Column diameter: 72.0 mm Operating voltage: 400 V Total power requirement: 1.10 kW Weight: 57.0 kg Dimensions (L x W x H): 400 x 630 x 990 mm Description: - Equipped as standard with digital quill stroke display and work light - High running smoothness thanks to cast iron pulleys - High-quality ball bearings ensure excellent concentricity of the quill - Large-size drill table with diagonally arranged T-slots - Drill table tiltable (± 45°), height adjustment via rack and pinion - Rotation direction switch for forward and reverse - Powerful and high-torque aluminium motor to IP 54 - Precision quick-action drill chuck included - Supplied as standard with T-slots in the ground base plate - Ergonomic handles for comfortable operation Scope of delivery: - Quick-action drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MT 2 / B 18 - Digital quill stroke display - Machine work light - Forward/reverse rotation - Safety cover - Height-adjustable safety cover - T-slot nuts Ledpfx Aoxaa Thol Nohf - Operating tools

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Pressure: 30 t Stroke: 142.5 mm Table surface: 500 x 180 mm Through-hole in table: 500 x 160 mm Frame gap: 1000 mm Installation height, table/ram at top: 120 - 1020 mm Approx. machine weight: 176 kg Approx. machine dimensions LxWxH: 0.8 x 0.8 x 1.8 m Simple hydraulic double-column press – custom-made, welded from 20 mm steel plate. Lhedsu N A Eajpfx Al Nsf Table support with V-block: 260 x 205 mm Lower beam installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Lower beam, vertical adjustment, manual, 10 increments, increment spacing 100 mm Ram slide, stroke cylinder Ø 63 mm with punch mounting, locating pin bore Ø 25 x 25 mm

Stanje: novo, Leto izdelave: 2023, Alzmetall Alztronic i16 Bench Drill with 5" Touch Display Condition: New Contact us to inquire about special discounts or send your inquiry by email with your contact details and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and intuitive user interface via pictograms - Manual input of spindle speed – target value - Speed display – actual value - Integrated drilling depth indicator with touch zeroing (drilling start) - Virtual drilling depth scale on the display - Machine status and warning messages on the display (safety) - Main switch, lockable - Forward and reverse operation via contactor control - Control voltage 24 V - Service information - Selectable user interface languages: DE/EN/FR/ES/IT/NL/RU - Spindle braking function – only ALZTRONIC (safety) - Adjustable display timeout Standard equipment: - Single-phase motor 230 V, 50 Hz - Infinitely variable speed adjustment - Reversing switch for forward/reverse rotation - Spindle guard with electrical interlock - On/Off button with lockable emergency stop flap - Connection plug, cable length 3m - Finish: structured paint light grey RAL 7035, anthracite RAL 7016, white aluminium RAL 9006 Drilling capacity, steel E335 (St 60): 16 mm Thread cutting, steel E335 (St 60): M 12 Drill chuck taper: MT2 Spindle stroke: 80 mm Throat depth: 190 mm Column diameter: 65 mm Manual feed Drill head height adjustment by handwheel Lhedpfxoxd Tqbo Al Nef Net weight: approx. 83 kg Infinitely variable speed adjustment Motor: 0.54 kW Spindle speed: 100–2000 rpm Optional accessories: - Röhm Supra drill chuck 1–13 mm or 3–16 mm - Alzmetall machine base For self-collection. Forklift available. Shipping also possible. Errors, alterations, and prior sale reserved. Further Alzmetall bench and pillar drills always in stock!

Stanje: dober (rabljeno), Tip: SSB 3 A Št. stroja: 5607 Leto izdelave: 1973 Oprema: - Vrtalna pinola MK3 - Strojna svetilka - Hitrovpenjalna vrtalna glava, vključno s konusnim trnom, vpenjalni obseg 3-16 mm - Brezstopenjske vrtalne hitrosti Območje 1: 0-900 obr/min Območje 2: 0-1700 obr/min - Naprava za rezanje navojev Stanje: dobro, preverjeno v delavnici, variator vrtljajev novo ležajen Lhjdpfx Alexlqxfe Nof

Stanje: novo, zmogljivost vrtanja: 32 mm, – MK4 – 80/2130 rpm – 2-speed motor – Rotates clockwise and counterclockwise – Table 385 x 335 mm – Table is rotatable – Emergency stop Lhodpfxjtttlfe Al Nef – Safety guard – Documentation – 400V

Stanje: novo, Tlak 50,0 t Hod 200 mm Površina stola 730 x 205 mm Ugradna visina 75 - 1050 mm Prolaz između vodilica stuba 730 mm Težina mašine cca. 292 kg Lhodpfexaa Ixsx Al Nof Dimenzije D-Š-V 1040 x 800 x 1880 mm Opis: - Standardno opremljen vitlom - Za jednostavno podešavanje visine radnog stola - Podešavanje klipa ručno ili pneumatski - Snažne radionicke prese za zanatske i servisne radionice - Odličan odnos cene i performansi zahvaljujući racionalnoj konstrukciji - Standardna nožna pedala omogućava slobodne ruke za rad na predmetu - Prošireno područje primene sa opcionim setom nastavaka za pritisak (10 delova) - Hidraulični cilindar sa integrisanom povratnom oprugom za povrat klipa - Zavareni čelični ram za visok nivo opterećenja i stabilnosti - Višenamenska upotreba zahvaljujući pomičnom hidrocilindru levo-desno

Stanje: novo, Pressure: 80 t Stroke: 400 mm Table area: 920 x 540 mm Motor power: 2.2 kW Pump capacity: 9.0 l/min Installation height: 800 mm Tank capacity: 31 l Clear width between uprights: 920 x 300 mm Machine weight approx. 0.725 t Lodpfjvu E T Hox Al Nehf Space requirement approx. 1.45 x 0.85 x 2.45 m Hand- and motor-operated workshop press featuring: - Laterally movable cylinder - Chrome-plated cylinder - Welded steel frame - Pressure adjustment - Hydraulic pressure gauge - User manual - 2-year warranty Other upright widths and installation heights available on request. Multiple presses in stock at all times.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 400 mm, - Capacity: 150 tons Lhsdju H Rk Sjpfx Al Nsf - Cylinder stroke: 400 mm - Working width: 1250 mm - Cylinder can be moved left and right - Electrically or manually operated - Pressure gauge - Emergency stop - 400V