Krožna žaga

BEHRINGER-EISELE PSU 450

Leto izdelave: 2004, Stanje: rabljeno, Technical details: Ncodpfxsu Nit Rs Abbol Saw blade diameter: 450 mm Cutting diameter: 150 mm Saw blade bore: 50 mm Saw blade diameter: 400 - 450 mm Saw blade speeds: 6 / 12 / 24 / 45 rpm Cutting range at 90 degrees, square: 140 x 140 mm Cutting range at 90 degrees, round: 150 mm Cutting range at 90 degrees, flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table size: Ø 700 mm Rotating table: 360 degrees Clamping pressure: 30 bar Electrical specification - voltage/frequency: 400 / 50 V/Hz Total power requirement: 3.6 kW Machine weight approx.: 1600 kg Machine dimensions: 1.5 x 1.0 x 2.35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for cutting materials such as solid steel, pipes, and profiles within the specified cutting area. Cutting speed depends on the material to be cut. Circular saw with hydraulic material clamping (adjustable clamping pressure) Mitre adjustment +30° to -90° Fitted with electro-hydraulic controls Hydraulic pump 2.2 kW; 23 l/min Coolant system integrated in machine base Piece counter

Stanje: dober (rabljeno), Robot Proizvajalec: Staeubli Tip: RX170 Ncsdpfjbrhtdox Abbsl 22126ä

Leto izdelave: 2011, Stanje: rabljeno, Technical Details: Saw blade diameter: Ø 400 - 500 mm Saw blade bore: Ø 50 mm Saw blade speed: 6 - 70 / stepless rpm Njdpju Niuhjfx Abbecl Cutting capacity at 90 degrees, round: Ø 140 mm Cutting capacity at 90 degrees, square: 140 x 140 mm Cutting capacity at 90 degrees, flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table size (LxW): 620 x 670 mm Height above floor: 1000 mm Total power requirement: 8 kW Machine weight approx.: 1170 kg The machine is currently located in the technical department. CIRCULAR SAW SEMI-AUTOMATIC – PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control For sawing of materials: solid steel, pipes, and profiles within the specified cutting ranges. Cutting speed varies depending on the material/workpiece to be sawn Clamping pressure: 30 bar Clamping stroke (Ø x stroke): 100 x 160 mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Ncedpjur Hfzefx Abbjl

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Technical data: - Load capacity: 15,000 kg - Dead weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm Ncsdpfjd Iuqajx Abbjl - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Model: E50 x 1000 Year of manufacture: 2003 Condition: Good, used, under power Operating hours: 43,000 h Technical data: See images. Nedpfx Absxd Tikjbjcl Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A4 Ncsdeu R R Avjpfx Abbol Year of manufacture: 2001 Specifications Metric / US Standard Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0 - 600 mm Multi-feed range: 0 - 9999 mm Minimum cut length: 35 mm Maximum cutting speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Approximate dimensions: Length: 4800 mm Width: 2200 mm Height: 2200 mm Weight: 5200 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Stanje: rabljeno, Leto izdelave: 2014, Maks. premer struženja: 160 mm Maks. višina struženja: 150 mm Maks. premer obdelovanca: 100 mm Maks. višina obdelovanca: 150 mm Maks. število vrtljajev: 6.000 min⁻¹ Pomik - X: 700 mm Pomik - Z: 375 mm Nodsqvd Iqopfx Abbjcl Os C: 360° Krmiljenje FANUC Vertikalni stružni stroj | EMAG - VL2 Opremljen s transporterjem za obdelovance. Stroj je v zelo dobrem stanju. Prosimo, upoštevajte, da so tehnični podatki dodani na osnovi primerljivih strojev.

Stanje: novo, Capaciteit, mm ----- 25 x 2 mm Min/max buigradius ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaitijd buigkop ----- 0,75 sec Standaardcomponenten volgens VDMA-, ISO- en DIN-normen. Njdpsga T Exofx Abbscl OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie-/botsingcontrole * Verlenging van bedlengte

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Nedpfx Aecxxx Rsbbjcl Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition