Hladna krožna žaga

Behringer Eisele VMS 350

Stanje: novo, Manufacturer: Behringer Eisele Model: VMS 350 Condition: NEW Maximum cutting section, round at 90°: 120 mm Maximum cutting section, rectangular at 90°: 170 x 100 mm Maximum cutting section, round at 45°: 120 mm Maximum cutting section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade thickness: 3 mm Bore diameter: 40 mm Adjustable saw blade speed: 17 rpm / 34 rpm Swiveling machine head: 45-90-45-30° Total motor power: 1.4/1.9 kW Podpfxjxwl Rgj Agpord Width: 900 mm Dimensions (L x W x H): 1050 x 900 x 1900 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Prjdpfx Aern Riqjgpsd Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Can be tested under power. Prodpswxw S Iefx Agpod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg Pedew T Sqyjpfx Agpsrd TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Laser power: 10kW (10,000W), Working area: 3000mm x 1500mm, Maximum material thickness: Mild steel: 25mm, Stainless steel: 30mm, Aluminium: 30mm, Copper: 12mm, Brass: 15mm. Positioning speed: 120m/min, Positioning accuracy: +/-0.05mm, Maximum workpiece weight: 1,100kg. Machine dimensions (X/Y/Z): approx. 9500mm x 3500mm x 3500mm, Extraction unit dimensions (X/Y/Z): approx. 1500mm x 1500mm x 4000mm, Machine weight: approx. 12,000kg, Operating hours: approx. 17,000h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Predpfx Agovyiqgjpsd

Stanje: rabljeno, Leto izdelave: 2000, Technical details: Drilling capacity in steel (diameter): 18 mm Throat depth: 250 mm Drilling stroke: 100 mm Drilling capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm Speed range: 225 - 4,300 / 2x 8-step rpm Spindle taper: MT 2 Feed: manual mm/rev Table clamping surface: 250 x 250 mm Vertical adjustment: 325 mm Table clamping surface (L x W): 250 x 250 mm Rotating table: 360° Base plate clamping surface: 320 x 250 mm Distance from spindle centre to base plate: 565 mm Column diameter: 90 mm Total power requirement: 0.55 kW Prjdpfxju R Uncj Agped Machine weight approx.: 160 kg Dimensions (L x W x H): 0.9 x 0.6 x 1.1 m High-performance drilling machine Thread cutting in steel possible up to M10 and in cast iron up to M14 Equipped with quick-action chuck Röhm 3 -16 mm Operation via control panel / foot switch

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic Punching Machine Brand: Boschert Model: Ecco Line EL 500 Digital Specifications: • Punching force: 28 t • Worktable dimensions (width x length): 500 x 1000 mm • Maximum sheet thickness: 6 mm (up to 40 mm punch diameter) • Maximum die diameter: 105 mm (up to 1 mm sheet thickness) • Maximum strokes: 180 strokes/min • Connected load: 5 kW Prodpsrn Swkefx Agped • Voltage: 3 x 400 V / 50 Hz • Total weight: 2 tons • Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm • Tool cabinet, 4 drawers for tools • Foot pedal • All accessories shown in the photos are included.

Leto izdelave: 1969, Stanje: rabljeno, Swivel bending machine Albert Stahl Type ABK 400 /5 Working length: 2530 mm Predpfeh Rkh Dsx Agpjd Sheet thickness: 5 mm

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side Prsdpofg Rldjfx Agpod

Stanje: dober (rabljeno), Leto izdelave: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry re-calibrated Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, 500 mm diameter - Infrared part measurement – 3D probe - Tool measurement via BLUM laser - Rotational viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active air-to-air electrical cabinet cooler - Active cooling for 4th & 5th axis, controlled - Network and USB connection - Controlled spindle chiller - Heidenhain rotary measuring system - POS contour monitoring - External hinged belt chip conveyor - Coolant pump at head, controlled via M functions - Pump for chip rinse system - Chip rinsing equipment - Machine status indicator - Air at spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring Prjdpfswz I Acsx Agpjd - 3-fold media connection at table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run company. In 2024, the spindle was replaced and geometry was calibrated (guides repaired and aligned). Since then, the machine has seen only limited use.