Škropilni stroj 25 t

Battenfeld DA 250/50 CD

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Boy 30 T2 Cedpjuh U Izofx Agqogw Schließkraft: 30 Tonnen Baujahr: 1992 Schnecke: 32 Schussgewicht: 123 g

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Codpfx Agehx Elfoqogw The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Cedpfxoh Rawbj Agqjgw Betriebsstunden: 200

Stanje: pripravljen za uporabo (rabljen), Inkjet printer for frame bending machine Cgodpfshzgtusx Agqow Length: 800 mm Width: 1000 mm Height: 1900 mm Weight: approx. 100 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Codpfx Agog Emvhoqsgw Shot weight: approx. 90 g

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm Cgsdjtrya Ropfx Agqew TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: rabljeno, Polavtomatski stroj za pihanje PET plastenk Proizvajalec: FERENC Tip: F-1400 Leto proizvodnje: 2006 Kapaciteta: cca 800 kosov/uro Število orodij v stroju: 2 x 5 L (pokrivka 48 mm) Dimenzije peči: Cedpjugu E Refx Agqogw - dolžina: 900 mm - širina: 900 mm - višina: 1200 mm Dimenzije pihalnega stroja: - dolžina: 1800 mm - širina: 750 mm - višina: 2000 mm Teža kompleta: 1200 kg Tehnično stanje: rabljeni stroj

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 106.864 h, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully functional Still in operation until week 11 Additional service reports and documents available Technical Specifications: Year of manufacture: 2003 Automatic operation: 106,864 hours Clamping force: 1,300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve at the injection unit for particularly high dynamics and reproducibility of the injection process. The back pressure is regulated, and the nozzle contact force is manually adjustable. - VE 557/00 AES Energy-saving system for automatic power optimization, enabling corresponding energy savings by continuously adjusting the pump drive speed to the power requirements of each injection cycle. Cgodpferp Dyrjx Agqew - VE 460/00 ED Electromechanical dosing drive via a speed-controlled three-phase asynchronous motor. This improves productivity through simultaneous movements, gentler material preparation, and further energy savings compared to hydraulic dosing. On request and at an additional charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Inspection by appointment possible. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or to get in touch, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double winder by Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesion-promoting extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion-promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Further features include: integrated width measurement, C-Scan for profile measurement, web guiding system, corona treatment, and film draw-off. Included: one spare 5-layer FSBK die head with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external control terminal. Documentation available. On-site inspection possible. Cedpfxjv T An Ss Agqsgw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Schließkraft 80 Tonnen Baujahr 1998 Schneckendurchmesser 35 mm Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Cgsdpjpdr Aiofx Agqew Minimale Werkzeug-Einbauhöhe: 200 mm