Sušilnik 2x100 m³ + parni generator 30 m³

Baschild TDK

Leto izdelave: 2022, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj),

Stanje: rabljeno, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ Gtodpfop Am Rgex Afqot 🔥 Gilles 300 kW Wood Chip Boiler for Sale – Reliable Industrial Biomass Technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for large systems, facilities, grain dryers, or central heating plants. Key Features: 🌲 Fuels: Wood chips, pellets, biomass – wide fuel versatility ⚡ 300 kW heat output – reliable and efficient for large-scale consumers 🔄 Automatic feeding, combustion control, and ash removal – minimal personnel required 🧠 Modern controls, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: 9,900 EUR – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions – experienced and competent.

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) Gjdpfx Afsw Dp Ufeqjtt 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Leto izdelave: 2001, obratovalne ure: 123 h, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Gsdpfx Aeftdv Usfqott Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: rabljeno, Tiskarski sistem: Neprekinjen / Kalander Glavni dobavitelji: Bison / Berstorff Projektirana kapaciteta: 160 m³/dan Dosežena kapaciteta približno: 200 m³/dan Efektivni delovni čas: 23 h/dan Gedjul H Nmspfx Afqott Referenčna debelina: 3,2 mm Maksimalna bruto širina plošče: 2500 mm Maksimalna neto dolžina plošče: 2440 mm Maksimalna neto širina plošče: Nepomejeno Minimalna neto širina plošče: 1220 mm (razrez) Minimalna debelina plošče: 2,0 mm Maksimalna debelina plošče: 10 mm Električni sistem: 380 V, 50 Hz Leto izdelave: 1985 Glavne nadgradnje: 2007–2009, 2016 Obratovanje do: maj 2018

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, L’impianto Spanner è composto dal cogeneratore e dal reformer. Il reformer, il cuore dell’impianto a cippato, produce gas di legno naturale dai cippati attraverso un processo controllato. Questo gas viene utilizzato per alimentare il cogeneratore. L’energia termica prodotta può essere impiegata per il riscaldamento di edifici, impianti di essiccazione o reti di teleriscaldamento, mentre l’energia elettrica viene immessa in rete. Gtedpfx Afjwvhf Teqet Modello: HK45 Potenza elettrica: 45 kW Potenza termica: 120 kW Consumo di cippato: 45 kg/h Requisiti per il cippato: Grana G30-G40 Umidità massima 15% Polveri sottili (

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Gjdpswtgcxefx Afqett Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Gsdpfjgwbbqex Afqstt Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wood chipper, sawmill offcut chipper LINDNER type T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: - Infeed width: 400 mm - Infeed height: 140 mm Gtsdor Ak Rgopfx Afqet - Rotor diameter: 450 mm - Rotor length: 400 mm - Main drive motor power: 33 kW - Feed drive motor power: 2 x 1.5 kW - Number of knives: 2 pcs - Sieve dimensions: 60 mm x 90 mm - Feed rollers in very good condition - Feeder drive motor power: 1.5 kW - Feeder length: 4,200 mm - Transport dimensions (L/W/H): 430 / 240 / 150 cm - Weight: approx. 2,000 kg

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Gedpfsw Sy T Hjx Afqstt Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim