Bacci MOM 90-C A Dvojni vbodni rezkalnik, horizontalni in vertikalni, avtomatski, z nakladalnikom.

Bacci MOM 90-C A

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Bsdpfed H Sc Eox Afnjwi Gewicht: 4.700 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Bodpsph Uk Nefx Afnewi Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: rabljeno, Cut Thickness Calculator for Band Sawmill Cutting Thickness Computer Alternative to Mudata control system with option for individual customization Industrial Touch PC Siemens Simatic S7 Compatible with rotary encoder or other measurement systems Cutting programs can be easily modified Cutting programs can also be grouped Software is customized according to customer requirements Operation possible via touch display or keyboard Next step in the cutting program can be triggered by button on the joystick All relevant values can be displayed individually on the display (e.g. total distance, next cut, complete cutting program, value of previous cut, feed rate, and more) All parameters can be displayed and modified on a dedicated parameter page or on the main screen The sensor for blade deviation monitoring can be evaluated (possible linkage with feed rate) Positioning via proportional valve and hydraulic motor or via stepper motor Inspection during operation is also possible on request Currently in operation on Primultini SGA 1300 CEB Bwedpfsiwaxnex Afnoi Suitable for any carriage size and any make For an appointment or further details, please just call.

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Bjdpfx Ajd Dhw Nsfnewi Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Leto izdelave: 2023, Stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Bedpfx Afsncd Azenjwi Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Side walkways/access passages Bwsdpfjtiwgijx Afnei Floor-level installation

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Znamka: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Bjdpfx Aevbcbusfnswi Leto: 2016 Stanje: Odlično Uporaba: PET / PP / PS folija ali plošča PET: Območje debelin: 0,25 – 2,2 mm Izhodna zmogljivost: 2.000 kg/h Največja širina plošče: 1.600 mm Ekstruder: RZE 120 mm Električna napajana: 3 x 480V 60Hz z N Širina kalandrske valjev: 1.800 mm Premeri kalandrske valjev: 450 / 700 / 700 mm Silikonska kopel, največja širina plošče: 1.600 mm Silikonska kopel, območje debelin plošče: 0,15 – 1,5 mm Vključen štiripozicijski navijalec WOB 1800 za navijanje dvojnega traku. Vse informacije so lahko predmet sprememb in/ali napak. Vsa oprema je na voljo do prodaje ali do umika iz prodaje.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, AMADA MODEL HFT 8025, zmogljivost 80 ton x 2500 mm dolžina upogibanja, hidravlična gredna (downstroking) CNC upogibna stiskalnica, opremljena z barvnim grafičnim CNC upravljalnikom CD 2000 s 4-osnim krmiljenjem. Nameščene elektronske varnostne pregrade ERWIN SICK, varnostne ograje s ključavnico na stranski in zadnji strani. Model: Amada HFT 8025 CNC upogibna stiskalnica Letnik: 2004 Tonska kapaciteta: 100 kN Bodpfx Afou A Dgrenswi Upravljalni sistem: CD 2000 CNC Krmiljene osi: Y1, Y2, X, R Maks. dolžina upogiba: 2500 mm Maks. višina odprtine: 470 mm Dolžina hoda: 350 mm Hitrost približevanja: 100 mm/sek Hitrost upogiba: 1–10 mm/sek Hitrost vračanja: 1–100 mm/sek Kapaciteta olja: — Moč motorja: 7,5 kW Teža: 6100 kg Dolžina mize: 2500 mm Širina mize: 60 mm Višina odprtine: 470 mm Globina grla: 420 mm CNC krmiljenje Pomik zadnjega prislona (X os): 700 mm/s, maks. domet prislona 1000 mm, R os 250 mm. Možnost demonstracije pod napetostjo. BROŠURA IN DODATNE INFORMACIJE NA VOLJO NA ZAHTEVO.

Stanje: novo, Leto izdelave: 2026, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 38 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 8 m3/h* ✔ Vsipna odprtina: 2031 x 1565 mm ✔ Dimenzije D/Š/V: 3,21/1,97/2,04 m Bwedpfxjiq U Ays Afnji ✔ Teža: 2450 kg 2 leti garancije ali 2000 delovnih ur

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm Bwodpfsidmptjx Afnei maximum cutting height: 130 mm main motor power: 55 kW maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW anti-kickback pawl row three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg