Brusilnik s širokim pasom

BÜTFERING Classic 211 CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: Gbodsychqzspfx Adksr • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Gbjdjwqdbmjpfx Adker Delovna miza: fiksna višina Podtlak preproga: da Število delovnih agregatov: 4 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Technische Daten: - Arbeitsbreite: 1350 mm Godpfx Adsvdtxijkebr - Pneumatische Oszillation - Vakuumtisch - Stand-alone Maschine (Tischhub/-senkung) 1. Kombi-Aggregat: - Motorleistung: 18,5 kW - Stahlkalibrierwalze - Stufenlose Bandgeschwindigkeitsregelung - Segmentiertes Schleifpad (52 Segmente à 26 mm) 2. Kombi-Aggregat: - Segmentiertes Schleifpad (52 Segmente à 26 mm) - Motorleistung: 7,5 kW - Stufenlose Bandgeschwindigkeitsregelung - Bürste am Materialauslauf - Stufenlose Vorschubregulierung - Pneumatische Bandreinigung

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Gbsdpfsg A D Anex Adkor Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Gjdjw Naanjpfx Adkobr Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: rabljeno, Leto izdelave: 2003, Kalibrirno-brusilni stroj SCM SANDYA 20 model 20 M3 135, rabljen leto izdelave: 2003 serijska št.: AE/024903 maksimalna delovna širina: 1350 mm hitrost podajanja: 3,5-18 m/min z inverterjem delovna višina: 4-170 mm vakumska miza: 7,5 kW Sestava: I. grupa: kalibrirni valj iz utorjenega jekla D. 250 – motor 22 kW II. grupa: brusni valj d. 250, trdota 45 SH – motor z dvema hitrostma 9/11 kW vrtljaji 1400/2800 III. grupa: kombinirani valj d. 170, trdota 30 SH + elastična segmentna blazinica s 46 sektorji – motor 11 kW z inverterjem Gbjdpfx Asxwbydsdkjr IV. grupa: satinirni valj Scotch-Brite Pozicionirna miza z obdelovancem dimenzija trakov: 2620 x 1370 mm pihala za II. in III. trak samodejno centriranje transporterja elektronsko upravljanje I./II./III. valja/blazinice

Stanje: rabljeno, številka stroja/vozila: 006621, Max. panel width: 1500 mm Max. panel length: 2200 mm Conveyor length: 13,500 mm Gsdpfstvrfgox Adkebr Return system for edge banding machine: left

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!) Gjdpfxjych Ige Adkobr

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 001048, This machine will be equipped with a new Siemens PLC and touch panel. Technical data: - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of construction: 2001, retrofit in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum conveyor belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 units, 2.2 kW each, with thermal contact - Feed motor: 1 unit, 1.5 kW, with thermal contact - Vacuum motor: 1 unit, 5.5 kW - Roller height adjustment axis: 1 unit, 0.18 kW - Feed rate: 2–10 m/min, frequency-controlled - Brush rotation speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400V, 50Hz - Electrical connected load: 15 kW - Fuse: 63A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (provided by customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight (including control cabinet): 2,220 kg - Colour: RAL 7035 light grey/black - Operator side: left/right - Brush change side: right - Ex version: No Gjdpfxjxtakmj Adkebr - Location: in stock Blomberg

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SA/005006, WIDE BELT SANDER/THICKNESSER WITH 3 BELTS DMC MOD. USK1350 M3 - CE COMPLIANT - USED - 1 steel roller - 2 rubber rollers - 3 rubber rollers - 3 independent motors - Working width: 1350 mm - Equipped with pad system (short piece device) - Air blower on the third unit - On/off device on each sanding unit - Touch screen control - Serial no. SA/005006 - Year: 2004 - CE compliant Gbedpewrnmpsfx Adker