Stroj za nanašanje z valjem

Bürkle SAL 1300

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling a BURKLE SAL1300 single-roller coating machine. Working width: 1300 mm Very good condition. Fully operational. Available immediately. Isdpfxei Euqqj Aqusbc

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Ibedpfxsg A D Ano Aqujc Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Leto izdelave: 1995, stanje: dober (rabljeno), UV kitarski valj Bürkle Znamka: Bürkle Model: SAL 1300 Št. stroja: 7250 Leto izdelave: 1995 Tehnični podatki: Delovna širina: 1300 mm Debelina obdelovanca: 100 mm Delovna višina: 870 mm Hitrost podajanja: 6–30 m/min Kromiran dozirni valj: premer 174 mm Valj za nanos z gumijasto prevleko: premer 238 mm Največji delovni tlak: 6 bar Motor: 400 V, 50 Hz, 3-fazni Mere za transport: 2850 x 900 x 2200 mm Teža: 1450 kg Inventarna številka: 2000353 Iedpfx Aog E Uf Sjqujbc

Leto izdelave: 1995, stanje: dober (rabljeno), UV valjčni lakirni stroj Bürkle Ibodpfx Ajg Hr A Isquec Znamka: Bürkle Model: SAL 1300 Št. stroja: 7251 Leto izdelave: 1995 Tehnični podatki: Delovna širina: 1300 mm Debelina obdelovanca: 100 mm Delovna višina: 870 mm Podajalna hitrost: 6–30 m/min Kromirano dozirno valj: premer 174 mm Aplikacijski valj, prevlečen z gumo: premer 238 mm Maksimalni delovni tlak: 6 bar Motor: 2,2 kW, 400 V, 50 Hz, 3-fazni Dimenzije za transport: 2850 x 900 x 2200 mm Teža: 1450 kg Št. zaloge: 2000360

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Isdpfx Aqsx Ah A Asuebc Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: - single brick, offset 50% - double brick, offset 50% - triple brick, offset 50% Iedpfsr Iyvbsx Aqusbc - single brick, offset 25% - double brick, offset 25% - triple brick, offset 25%

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space Iodpfx Aodh Tfgsqusbc EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): Iedjuhv R Dspfx Aquebc “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: novo, Leto izdelave: 2025, Sleeve wrapper/film banderoling machine for packaging large products. Includes shrink tunnel. Fully automatic product feed, automatic transport into the tunnel, and discharge. - Specifications: Power supply: 380V, 21.0kW; Compressed air: 0.6m³, 6.0Bar; max. machine cycle rate (unloaded): 10 cycles/minute; max. product dimensions (mm): W750 x H300, machine dimensions (mm): L5060 x W1150 x H2000; weight (net/gross): 1200/1400kg. Ibjdev Nl N Depfx Aqusc Please note that our new prices are often below typical used prices. Feel free to contact us and let us know your packaging application. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Load capacity in kg: 2000 kg Fork length: 1800 mm Lifting height min. 85 mm, max. 200 mm Fork width: 155 mm Overall width: 540 mm Ibodefgyhpopfx Aquoc Number of wheels: 4 front, 2 rear Tyres: PU/PU Fork tines (Length x Width x Thickness): 1800 x 155 x 50 mm Machine weight approx. 0.088 t Dimensions (L x W x H): 2.15 x 0.54 x 1.20 m SPECIAL OFFER PRICE!!! - Controlled lowering of heavy loads - Low-maintenance hydraulic unit in steel design - Rounded fork tips for increased safety when entering pallets - Hard-chromed piston rod and overload valve - Steering and load rollers with ball bearings for smooth running even under load