Stebrni vrtalnik

Böhrer SSB 3 A

Stanje: rabljeno, TECHNICAL DATA - Spindle speed: 400 - 4,500 [rpm] - Drilling capacity in steel / cast iron: 10 / 13 [mm] - Drilling depth: 60 [mm] Ledpouhabtsfx Afrjhp - Spindle to column distance: 185 [mm] - Usable table area: 220 x 300 [mm] - Motor power: 0.5 [kW] - Power supply: 220 [V] - Speed selection via display of drill diameter and material - Electronic spindle speed control - Infinitely variable spindle speed adjustment from 400 to 4500 rpm - Constant speed under load - Adjustable drill head height through pneumatic balancing device - Fine depth adjustment through graduated vernier scale - Electronic motor protection - Fully machined base plate (220 x 300 mm)

Stanje: pripravljen za uporabo (rabljen), A compact sweeper Hako with 2 disc brushes and central suction system is available. Axle loads front/rear: 1200kg/1500kg, turning radius: 1390mm, engine: Yanmar 3TNV88C, power output: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, travel speed forward/reverse: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions L/W/H: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection possible. Lhedewaa Hqjpfx Afrjp

Stanje: novo, Modern, precise column drilling machine for production, based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and standard chip breaking control. The digital display shows feed rate, spindle speed, and drilling depth. Equipped with a forward/reverse switch and emergency stop button. Full motor protection included. Pre-configured machine with special equipment: thread cutting attachment, retraction function, and LED lamp. Standard drilling capacity in E 335: 30 mm Thread cutting capacity: M 20 Spindle: MT 3 Feed rate steplessly adjustable: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Spindle-to-table distance: 90 to 840 mm Table size: 500 x 365 mm Column diameter: 110 mm Ljdpfx Ajf Ey Auefrjhp Overall height: 1,900 mm Weight: 280 kg Two-speed motor: 0.8/1.5 kW Infinitely variable spindle speeds Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting attachment - Retraction function - LED lamp

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 15470, Offer 25095 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Spindle taper: Morse taper 4 Lhodpswd Ii Usfx Afrsp - Spindle stroke: 180 mm - Infinitely variable spindle speeds with gear change: - Range 1: 50 – 175 rpm - Range 2: 175 – 640 rpm - Throat (distance spindle to column): 330 mm - 3 automatic feeds: 0.1 – 0.2 – 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable by rack and hand crank - Max. distance table – spindle approx. 780 mm - Max. distance machined base plate – spindle approx. 1250 mm - Coolant system - Work light - Drive motor: 400 V / 4 kW - Footprint approx.: W 720 x H 2050 x D 1150 mm - Weight approx.: 500 kg

Stanje: rabljeno, Leto izdelave: 1984, Drilling capacity in steel (diameter): 23 mm Throat depth: 270 mm Drilling stroke: 110 mm Spindle taper: MT 3 Table size: 400 x 385 mm Feeds: mm/rev Spindle speed: 135 - 825 rpm Lhedpfx Afjtqy Ngorsp Total power requirement: 0.9 kW Machine weight approx.: 0.25 t Dimensions (L x W x H): 1.2 x 0.8 x 2.0 m

Leto izdelave: 1999, Stanje: rabljeno, TRAGFÄHIGKEIT 2000 kg HUBHÖHE 4,7 m & 5 m ARMLÄNGE 3,2 m 2 STÜCK Lodpfx Aswa I A Tsfrjhp

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ALZMETALL AX 4 / SV Column Drilling Machine 3KW Manufacturer: Alzmetall Model: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity in steel E335 (St 60): 55 mm Tapping capacity: Steel E335 (St 60): M42 Cast iron EN-GJL-200: M56 Short spindle MK 4 Spindle stroke: 140 mm Usable throat: 300 mm Column diameter: 145 mm Machine table, usable surface: 615 x 430 mm Distance spindle-table min./max.: 150/735 mm T-slots: number x width x spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Stepless drive Motor: 1500 rpm Power: 3.0 kW Spindle speed rpm: 70-2400 Standard equipment: - Main switch with motor protection switch, lockable - Mushroom emergency-stop button (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection rating IP54 - Spindle guard with electric interlock - Finish: DD textured paint, signal white RAL 9003, PANTONE 7545c, black - Machine oil: initial fill; loose container supplied Available options: - LED machine lamp - Tapping unit with soft start (from 2025) - Coolant system in the base Lsdpfxexd Ttpe Afrshp - Digital drilling depth indicator - Fine drilling depth adjustment 0.1 mm

Stanje: novo, Drilling capacity ----- 50 mm Tapping capacity ----- M33 Motor ----- 3 kW Speed range ----- 55 ~ 1450 rpm Spindle stroke ----- 210 mm Spindle mount ----- MT4 Automatic spindle feed ----- 0.1 / 0.2 / 0.3 / 0.4 mm/rev Worktable ----- 580 x 580 mm Base ----- 860 x 580 mm Throat depth ----- 375 mm Column diameter ----- 180 mm Max. distance spindle - table ----- 800 mm Max. distance spindle - base ----- 1325 mm Weight ----- 860 KG Lhodpfx Aoga T H Iefrjp INCLUDES * Motorized table adjustment * LED work lamp * Coolant system * Digital depth stop * Tapping function * 2-speed motor * CE plug * Tool case with various tools

Stanje: novo, Bernardo Gear-driven Column Drilling Machine GB 50 HS Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 60 mm Maximum thread cutting: M42 Drill chuck: 1 - 13 mm / B 16 Morse taper: MT 4 Spindle speed / number of steps: 40 - 2100 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Throat depth: 370 mm Max. distance spindle / table: 600 mm Distance spindle / base plate: 1190 mm Quill stroke: 250 mm Column diameter: 200 mm Table size / T-slot size: 600 x 500 mm / 14 mm Motor power: 2.2 / 2.8 kW Machine dimensions (W x D x H): 700 x 1050 x 2350 mm Weight approx.: 670 kg Scope of delivery: • Geared drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Reducing sleeves MT 4 / 3, MT 4 / 2 • Motorized table lift Lhjdpfx Afod Tm T Horjp • Coolant system • Electromagnetic spindle feed • Thread cutting device • Automatic tool ejector • LED machine lamp • Initial fill with Shell Tellus 46 • Digital speed display • Digital drilling depth display • Height-adjustable protective cover

Stanje: rabljeno, Technical details: Drilling capacity in steel (diameter): 28 mm Throat depth: 345 mm Drilling stroke: 190 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT4 Spindle speed: 50 - 1280 rpm / 4-step stepless Feed: 0.1; 0.2; 0.3 mm/rev manual/automatic Maximum spindle-to-table distance: 200 - 800 mm Table clamping surface: 450 x 600 mm Table rotation: 360° Table adjustment: vertical 600 mm Column diameter: Ø 160 mm Machine weight approx.: 273 kg Ljdpfxou Idk Uj Afrshp Machine dimensions (LxWxH) approx.: 1.0 x 0.71 x 2.0 m Tapping operation selectable for right- and left-hand rotation via foot switch and/or depth stop Table adjustment via hand crank Coolant device Machine vice Röhm Supra quick-action chuck, 3 - 16 mm Slight damage to cover as is/in current condition *