Stroj za žaganje cevi - stroj za posnemanje robov cevi

AXXAIR CC 322

Leto izdelave: 2024, stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg Dujdpfx Aeftdh Iefaou The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm Duodpfx Aofu Ivzjfaou • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Digital technology: the NEOPULSE 400 CW is a three-phase pulsed MIG/MAG power source designed for heavy industry applications. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding welding tasks. Its intuitive and functional digital interface allows for easy adjustment of all welding parameters. MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulose electrodes (up to Ø 6 mm). Duedpfx Afjmxkggsaeu TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Stanje: novo, Leto izdelave: 2026, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom Dusdpfx Afemb U Tuoaju • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: zelo dobro (rabljeno), Motorised welding column 3x3 with movement control via pendant. Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch and flux hopper + Lincoln NA-3N control panel for Amperage and Voltage regulation. Submerged arc duty cycle: 1000 Amperes at 100%. Idealarc® DC-1000 Submerged Arc Welder Dujdpfx Asu Afttofaju Input Voltage: 230/460 V Input Current: 193/96.5 A Input Frequency: 60 Hz Input Phase: 3 Input Power: 230/460/3/60 Mode Icon: CC/CV Output Range: 150-1300A DC, 16-46V Polarity: DC Rated Output: 1000A/44V/100%

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control Dujdogvkktjpfx Afasu - Very high stability – compact model - Through-hole in the turntable - CE marking

Stanje: rabljeno, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding system MESSER GRIESHEIM - POLYSOUDE RC200 Welding power supply, inverter welder POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Serial no. (welding source): 9885186 Serial no. (cooling unit): 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours read off Duedpfet Awm Djx Afasu - Operating and maintenance manual Space requirements welding unit (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight of welding unit: 45 kg Weight of cooling unit: 25 kg Good condition Without accessories Price is for a set consisting of 1 x power source and 1 x water cooler.

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left Dusdpsttah Refx Afasu → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: novo, 890*1100 mm 250 kg/m2 16,15 € 500 kg/m2 18,02 € 750 kg/m2 22,50 € Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas prosimo kontaktirajte. Djdpfx Afjgqw A Heasuu Ponujamo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema, kot na primer: okvirji, kotni in naletni ščitniki, zaščita pred potiskanjem, iverne plošče, mrežaste rešetke, mreže za zadnjo steno, globinski prečniki – vse na voljo. Dostava: Prosimo, povprašajte za stroške dostave z navedbo vaše poštne številke, lokacije in želene količine artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje!

Stanje: novo, Table diameter 900 mm Table load capacity 1.0 t Swivel range 135 degrees Rotational speed 0.12 - 1.2 rpm Faceplate height 820 mm Welding current 500 amperes Total power requirement 0.75 + 0.55 kW Machine weight approx. 1.1 t Space requirement approx. 1.5 x 1.0 x 0.9 m • Self-locking gearbox, therefore no overrun or backrun under eccentric load. • Electronic components from Schneider, Siemens, and Delta. • Infinitely variable speed control of the turntable via frequency inverter. • High stability due to robust construction. • Welding current transmission. • CE certificate. • Excellent price / quality ratio. • The D-HBE series is supplied as standard with a wired remote control and foot switch. Dusdpfxefv Axxe Afaeu