Kompresor

Atlas Copco FX11 (A9)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° Pgedpjxgnz Tofx Adyog - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Pgjdpow Ucyusfx Adyeg X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Leto izdelave: 2011, GILDEMEISTER CNC twin-spindle turning center Model: CTX beta 1250 4 A Machine No.: 00700000211 Year of manufacture: 2011 Control: CNC path control incl. 19” TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run time: 24,814 h Pedpfxjwcxlwe Adyogg Technical data and equipment available on request

Stanje: rabljeno, Leto izdelave: 2012, x-hod: 1.035 mm y-hod: 560 mm z-hod: 510 mm CNC upravljalnik: HEIDENHAIN TNC620 Dimenzije mize: 1200 x 560 mm Največja obremenitev mize: 1000 kg Vreteno: SK 40 Število vrtljajev vretena: 10.000 U/min Pogonska moč vretena: 13 kW Neskončno nastavljiv pomik: 20.000 mm/min Hitri pomik: 25 m/min Orodniška izmenjevalna naprava: 20 pozicij Naprav za notranje hlajenje (IKZ): 20 bar Obratovalna napetost: 400 V Skupna priključna moč: 17 kVA Teža stroja: cca 4,1 t Potrebni prostor: cca 2,55 x 2,30 x 2,25 m Transportni trak za odrezke: 3,90 x 0,95 x 1,60 m - Tovarniška št.: 1539000377A - Delovni čas stroja: 21.689 h - Delovni čas vretena: 9.021 h Pgedpfx Ajw A Spvedyjg - Krmiljenje: Heidenhain TNC 620 - elektronsko ročno kolo - Transportni trak za odrezke - IKZ 20 bar

Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 13639, Krmiljenje Heidenhain Pomik X: 1.200 mm Pomik Y: 800 mm Pomik Z: 500 mm Glavno vreteno: Hitrost: 16.000 min⁻¹ (vrt/min) Pogonska moč glavnega vretena: 17 kW Vpenjalo orodja: tip HSK63 Premer vretena pri prednjem ležaju: 70 mm Nadgrajen menjalec orodja, kapaciteta: 100 orodij Rotacijska miza (Swing round table): Premer rotacijske mize: 800 mm Zasuk osi A: -15 / +97° Rotacija osi C: 360° Maks. obremenitev mize: pribl. 1.000 kg Maks. premer orodja: 80 mm Maks. premer orodja s praznim sosednjim mestom: 125 mm Maks. dolžina orodja: 300 mm Pjdpfxsinh Rqj Adyjgg Maks. teža orodja: 8 kg Pomiki: Hitri pomik (X / Y / Z): 30 m/min Skupna priključna moč: 31 kVA Teža stroja: 15 t Prostorske zahteve: pribl. 6,0 x 5,0 x 3,6 m Ostala oprema: - Dokumentacija - Odvajač odrezkov - Elektronska kompenzacija toplotnih raztezkov za osi Y in Z

Stanje: rabljeno, Leto izdelave: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Pgsdpfx Aow Df A Ssdyog Control: SIN 840D Powerline Spindle speeds - stepless: 1 - 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z-axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z-axis: 10,000 N Rapid traverse B-axis: 11.20 rpm Pallet size: 800 x 630 mm Table load: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 - 500 rpm Tool magazine: Chain magazine, 120 positions Tool diameter: 100 mm Tool diameter with 2 empty pockets: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10.00 kg Total power requirement: 60.00 kW Machine weight approx.: 13.00 t Space requirement approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, mode 4 operation, extraction system.

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Operating hours 5900 h Travel paths X 350 mm Y 220 mm Z 220 mm Podpfx Ajwzyr Aodyogg U 350 mm V 220 mm Year of manufacture 2008

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Z-axis travel 360 mm Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Space requirement approx. 9.75 x 3.10 x 2.85 m Psdpfxowzynqj Adysgg Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 300 mm, merilno območje osi Y: 300 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 50 kg, skupna višina: 860 mm, skupna širina: 782 mm, skupna dolžina: 920 mm, skupna masa: 54 kg, Oprema: dokumentacija / priročnik, Keyance VL-550 Podpfx Ajuactiodyogg The system was only used very little. We will be happy to provide you with further information at any time.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal tool milling machine with gear transmission, travel distances X/Y/Z - 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, 3 kW motor, 18 speeds 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left/right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/tilting table, dimensions 1500x1700x1750 mm, approx. 2200 kg Podpfxofvci Eo Adyogg