Ovoj za palete StretchWrapper

ATLANTA SYNTHESI

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions Dsdpfev Npx Nox Ag Nsku F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Naprodaj Atlanta avvolgitore synthesi vrtljiv krožni ovijalec palet iz leta 2016. Stroj je v dobrem stanju in deluje brezhibno. Opcijsko na voljo z nakladalno rampo. Cena z rampo je 2550 €. Na voljo še več (robotskih) ovijalcev. Povprašajte po razpoložljivih strojih. Za več informacij mi lahko brez zadržkov pišete. Video delujočega stroja lahko pošljem preko WhatsAppa. Dkodpfx Asxcb Hzeg Nou Prav tako nudimo ovijalno folijo. Za več informacij nas kontaktirajte. Možna je menjava za (okvarjen) ovijalec palet. Oglejte si tudi moje druge oglase. Ovijalec, ovijalec za palete, ovijalni stroj, ovijalni robot, ovijalna folija, robot ovijalec, stroj za ovijanje, folija, ovijač

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiWaage02, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height 500 mm – core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Options available: Ramp OPRS film carriage with PreStretch 200% Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optionally 1650 mm) Wrapping height (including pallet) 2,200 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and cycle end Emergency stop switch, CE compliant Turntable always stops at the same home position Fall protection for film carriage Pushbutton for machine power on, start & stop function, and reset according to CE standards Ø 22 mm Dodowtc Dlspfx Ag Njku ADJUSTABLE PARAMETERS ON OPERATOR PANEL All functional parameters adjustable via display F00 – Display lock for program change F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speed for up and down independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor wrapping height delay F13–F16 – Film tension for bottom/top wraps & ascent/descent independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE OPERATOR PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (up only or down only) F01-3 – Pushbutton for manual functions F10–F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated) F22/F23 – Wrapping cycle for top sheet F29 – Soft start cycle for edge protection application F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via pushbutton Further machines available from stock in Ludwigsburg.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Signal tone at wrapping start and at end of cycle Emergency stop switch according to CE standards Turntable always stops at the same home position Fall protection for the film carriage Push buttons for machine power-on, as well as start & stop function & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display Dedpfxjv Iqyrs Ag Nsku F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speeds for upward and downward movement can be set independently F03 – Upward carriage speed from 1.3 to 5.4 m/min F04 – Downward carriage speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay time for photo cell wrap height F13–F16 – Film tension for base & top wraps / ascent & descent can be set independently F62 – Ergonomic height for film replacement Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (only up or down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (disables height photo sensor) F22/F23 – Wrapping cycle for cover sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to minimize film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS” Motor-driven pre-stretch system 200%. Optionally with easily interchangeable gear set for 150%–200%–250% stretch Film specifications: Max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Pre-stretch set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Cutting device etc. Additional systems available from stock in Ludwigsburg. Images may show chargeable options.

Leto izdelave: 2024, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Dedpfx Agov Iqt Ej Njku Additional units available from stock in Ludwigsburg.

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Djdpfxev Iquco Ag Neku Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.