Ovijalec palet Obračalna miza s skalo

ATLANTA - mit integrierter Waage SYNTHESI - Palettenwiegesystem

Exhibition machine, like new.

SYNTHESI with integrated scale
Codpowtc Dljfx Agtjrh
Pallet weighing system integrated into the machine

FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE)
Film tension electronically controlled via control unit
Film specification: max. outer diameter Ø250 mm – height 500 mm – core Ø76 mm
Standard connection: 230 V – 1PH+N+PE – 50/60 Hz

Options available:
Ramp
OPRS film carriage with PreStretch 200%
Turntable 1650 mm
Wrapping height up to 3500 mm

TECHNICAL DETAILS:
Turntable 1500 mm (optionally 1650 mm)
Wrapping height (including pallet) 2,200 mm
Height detection by photoelectric sensor
Frequency-controlled turntable drive (soft start/stop)
Frequency-controlled carriage speed upward/downward
Acoustic signal at start of wrapping and cycle end
Emergency stop switch, CE compliant
Turntable always stops at the same home position
Fall protection for film carriage
Pushbutton for machine power on, start & stop function, and reset according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON OPERATOR PANEL
All functional parameters adjustable via display
F00 – Display lock for program change
F02 – Steplessly adjustable turntable speed 5–12 rpm
Carriage speed for up and down independently adjustable
F03 – Carriage speed upward from 1.3 to 5.4 m/min
F04 – Carriage speed downward from 1.3 to 5.4 m/min
F05 – Number of wraps at pallet base (1–10 wraps)
F06 – Number of wraps at pallet top (1–10 wraps)
F09 – Photo sensor wrapping height delay
F13–F16 – Film tension for bottom/top wraps & ascent/descent independently adjustable
F62 – Ergonomic height for film change
Film consumption display (optional)

ADJUSTABLE WRAPPING PROGRAMS ON THE OPERATOR PANEL
6 storable wrapping programs
F01-1 – Cross wrapping (up/down)
F01-2 – Simple wrapping (up only or down only)
F01-3 – Pushbutton for manual functions
F10–F11 – Wrapping cycle with predefined start and stop height
F12 – Wrapping to a stored height (with photo sensor deactivated)
F22/F23 – Wrapping cycle for top sheet
F29 – Soft start cycle for edge protection application
F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Wrapping cycle with manual or motorized rope forming (optional)
Reinforcement cycle via pushbutton

Further machines available from stock in Ludwigsburg.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.